Error when create the index
I'm new to Oracle Text, and I did the following on a Oracle 9i DB, and got the error as:
"ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10509: invalid text column: AD_FINALTEXT
ORA-06512: at "CTXSYS.DRUE", line 157
ORA-06512: at "CTXSYS.CATINDEXMETHODS", line 100
Can anyone tell me what's wrong? Thanks a lot.
Steps I did:
CREATE TABLE print_media (
product_id NUMBER(6) PRIMARY KEY,
ad_finaltext CLOB )
INSERT INTO print_media VALUES (2056,
'The TIGER2 2056 mouse pad meets all known industrial standards.')
INSERT INTO print_media VALUES(3106,
'The TIGER2 3106 Keyboard has all the standard features of a keyboard.')
INSERT INTO print_media VALUES(5206,
'The TIGER2 5206 Keyboard includes a built-in mouse.')
COMMIT
CREATE INDEX print_media_ad_tx
ON print_media ( ad_finaltext )
INDEXTYPE IS ctxsys.ctxcat
This is the error you get when the text column is not one of the supported types. But in this case, it is
CLOB, so it should be working -- you're sure that you didn't make the text column an NCLOB by mistake?
NCLOB is not supported.
Similar Messages
-
Error when structuring the index of aggregate 100165 for InfoCube 0TCT_C01
Hi,
I was getting following error:
**Error when structuring the index of aggregate 100165 for InfoCube 0TCT_C01
I used this link Please Help me...
I followed all the steps:
1.Delete indexes.
2.Load the InfoCube.
3.Create Indexes.
4.Roll-up of aggregates
but still getting the same error(Roll-up of aggregate is failing).
After the failure if i repeat the step then it gets executed successfully.
I need to monitor the PC ...and at the end of the complition it fails(daily)...
Please can anyone help me on this issue(that why the chain is failing at the roll-up)?Go to TX RSDDV with your cube an identify the technical ID of ur aggregate (a number 100045 for instance).
TX SE11 goto table RSDDAGGRDIR filter the selection with AGGRCUBE = 100045.
Copy the AGGRUID (something like 3QL29Z7ZLO3BQZDSSLRU0MGOI)
Then come to TX SE37; RSDDK_AGGREGATES_FILL; hit the single test button
I_T_Aggregate enter your AGGRUID
I_T_INFOCUBE enter the techid of your cube
Execute.
This will fill your aggregate.
Hope this will help......
Regards,
Mahesh -
Error when creating the form in Salary Statement of ESS
Dear All,
We are implementing ESS and MSS,
when i try to select ESS>Benfits and Payment>Salary statement, it shows the error as <b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form</b>.
We have configured ADS in our ERP system as per the ADS config guide.
Landscape is, NW04s ,ECC5.0 integration, corresponding ESS and MSS versions.
<u><i>Complete Error is:</i></u><b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:495)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:366)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:454)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:350)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:264)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:243)
at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:196)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:256)
at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:217)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:238)
at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)</b>
your input will be appreciated,
please do the needful.
Regards,
Sireesha.hi Sandip
I clear the temporary files, but the error persist.
I think so, my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
thanks for your post and helps,
Ivan -
"Error When Creating the form" in "Salary Statement"-Benefits and Payments
hi
When I enter the option "Salary Statement" (in "Benefits and Payment") shows me the error "Error When Creating the form"
http://img571.imageshack.us/img571/9986/payroll1.jpg (in "Salary Statement")
http://img153.imageshack.us/img153/3007/payroll2.jpg (My Error - "Error When Creating the form")
but, my sap system has Payroll customized, check it entered this tcode RPCEDTE0 I also put the appropriate values to obtain a good result.
http://img716.imageshack.us/img716/2544/payroll5.jpg (screen RPCEDTE0)
http://img541.imageshack.us/img541/1593/payroll6.jpg (result RPCEDTE0, Remuneration Statement correctly)
What I must customize addition to Payroll(back-end) to run this option of "Salary Statement"?
I hope for posts and helps,
Ivanhi Sandip
I clear the temporary files, but the error persist.
I think so, my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
thanks for your post and helps,
Ivan -
Hi All,
When I try to transport ODS from dev to quality i m getting the following error.
<b>DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object XADDR1
</b>
<b>XADDR1</b> is my ODS. <b>BQ1CLNT355</b> is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
Please Suggest solution,if any body encountered same problem. It is very urgent for me.
Regards,
Ramana.Hi
You generate export datasource once again
Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
Hope this helps
Reg
N Ganesh
assign points if useful*** -
Payslip - Error when creating the form
Hi,
I have an error with the Paylsip iview in ESS WebDP version backed by ECC5. I get 'Critical Error' in the iview and the following stack trace in the defaultTrace.trc.
Not really sure even where to start looking. Any help greatly appreciated.
#1.5#00156056B38B006F0000001F0000265800041F985F051B79#1160639196531#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#522046#102##sapt156z.bdn.neas_NPT_8144550#522046#2502ee2159c511dbc22e00156056b38b#ID\#(J2EE8144500)ID1747837850DB00989374704737658807End.WID1160638913529##0#0#Fatal#1#/Applications/Xss#Java###Error when creating the form
[EXCEPTION]
#1#com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
TIA
JFixed it. We were missing the Variant backing the payslip which hadn't been transported.
-
Error when creating spatial index in 10g
Hello.
I have a problen when I try to create a spatial index. The strange thing is that the same commands always works fine in some machines, but if always fails in others. I tryed in diferent versiones of Oracle, but I have the error in al of them. The versions I have tryed are:
- 10.2.0.1
- 10.2.0.4
The operating systems are:
Windows XP professional 32 bits
Windows 2003 Server 32 bits
These are the steps i make:
1) Create a Table with a SDO_GEOMETRY column (GEOMETRY)
2) Load data with SQLLDR (I hve tryed different SRID's, and all fail)
So far everything is ok
3) Create the INDEX
When I execute the CREATE INDEX command CREATE INDEX MADRID_SX ON MADRID (GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
I obtain the error:
ERROR en linea 1:+
ORA-29855: se ha producido un error en la ejecucion de la rutina+
ODCIINDEXCREATE+
ORA-13282: fallo al inicializar la transformacion de coordenadas+
ORA-06512: en "MDSYS.SDO_INDEX_METHOD_10I", line 10+
I too have noticed that if I execute the next command, I have an error:
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),25830) from dual;
ERROR en linea 1:+
ORA-13282: fallo al inicializar la transformacion de coordenadas+
ORA-06512: en "MDSYS.SDO_CS", linea 75+
ORA-06512: en "MDSYS.SDO_CS", linea 112+
ORA-06512: en "MDSYS.SDO_CS", linea 2678+
And if I execute the next command, I too have another error:
SELECT SDO_CS.VALIDATE_WKT(25830) FROM DUAL;
FALSE (169)*
Any ideas? Could it be related with something inside the machines, user privileges, etc.?
Thanks in advance.I have found that the problem is to use a SRID of AUTH_NAME column in MDSYS.CS_SRS table without the value "Oracle." in it.
If I use an Oracle’s SRID, everything works fine. If I use an EPSG’s SRID, fails.
For example, this command uses an Oracle SRID (8192) and one from the EPSG (25830), and fails:
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),25830) from dual;
ERROR en linea 1:
ORA-13282: fallo al inicializar la transformacion de coordenadas
ORA-06512: en "MDSYS.SDO_CS", linea 79
ORA-06512: en "MDSYS.SDO_CS", linea 116
ORA-06512: en "MDSYS.SDO_CS", linea 2690
However, if I use two Oracle SRID (8192 and 83030), it works.
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),83030) from dual;
SDO_GEOMETRY(2001, 83030, SDO_POINT_TYPE(1625183.71, 5936269.06, NULL), NULL, NULL
Therefore, the problem seems to be to use a non Oracle SRID. -
Error when creating the form Pay ESS "Salary Statement"-Benefits and Payments
Dear All.
I have a issue when genere the PayError when creating the form Pay ("Salary Statement"-Benefits and Payments)
Thanks in advance
RegardsHi Juan,
This is a very common problem.
refer the following thread ESS EHP5 Payslip form error
Thanks,
Aashima -
Errors when creating spatial index
Hi,
I am new to OTN and oracle technology. I met a problem as I wanted to create a spatial index.
I created a table 'geoobject' with a column 'shape' of sdo_geometry.
The I run the following script:
insert into user_sdo_geom_metadata values ('geoobject', 'shape',
mdsys.sdo_dim_array(
mdsys.sdo_dim_element('latitude', 0.0000, 50.0000, 0.000050),
mdsys.sdo_dim_element('longitude', 0.0000, 80.0000, 0.000050)), 8265
after that I insert data into the table:
update geoobject set shape=
mdsys.sdo_geometry(2001, 8265,
mdsys.sdo_point_type
(to_number((select latitude from temp_location where temp_location.gid = geoobject.geo_id)),
to_number((select longitude from temp_location where temp_location.gid = geoobject.geo_id)), null),
null, null);
Then I wanted to create the spatial index:
create index geoobject_idx on geoobject(shape)
indextype is mdsys.spatial_index;
But I got the error messages:
Error in line 1:
ORA-29855: Fehler bei Ausführung der Routine ODCIINDEXCREATE (Error at running routine ODCIINDEXCREATE)
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13230: Temporäre Tabelle [temp-table: M2_7A21$$] konnte während Erstellen von R-Baum nicht erstellt werden
(temporary tables could not be established when R-tree was generated)
ORA-29400: Data Cartridge-Fehler
ORA-01659: Kann MINEXTENTS über 2 in Tablespace AMSDB hinaus nicht zuweisen
ORA-06512: in "MDSYS.SDO_INDEX_METHOD_9I", Zeile 7
ORA-06512: in Zeile 1
I read some messages from the OTN forum and got to know to test the data with the following script:
SELECT geo_id FROM geoobject
WHERE SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(shape, .005) <> 'TRUE';
All data passed this test.
Could somebody give me some suggestions?
regards,
YiweiMy spatial index has been successfully generated after i enlarged the tablespace. But I encounter a new problem.
I have saved many points in the table. I can use oracle spatial analyzer to see all the points. But as I tried to run the following query according to the examples in the oracle spatial user guider, I always get error messages. I have no idea about which problems there might be.
The Query is:
select geo_id, geo_name from geoobject g
where mdsys.sdo_filter
(g.shape, mdsys.sdo_geometry
(2003, null, null,
mdsys.sdo_elem_info_array(1, 1003, 1),
mdsys.sdo_ordinate_array(25.00, 60.00, 25.00, 70.00, 35.00, 70.00, 35.00, 60.00, 25.00, 60.00)
), 'querytype=WINDOW') ='true'
and sdo_relate
(g.shape, mdsys.sdo_geometry
(2003, null, null,
mdsys.sdo_elem_info_array(1, 1003, 1),
mdsys.sdo_ordinate_array(25.00, 60.00, 25.00, 70.00, 35.00, 70.00, 35.00, 60.00, 25.00, 60.00)
), 'masktype=TOUCH querytype=WINDOW') ='true';
The error messages are:
ERROR in line 1:
ORA-29902: Fehler bei der Ausführung von Routine ODCIIndexStart()
ORA-13207: Falsche Benutzung des Operators [SDO_FILTER]
ORA-06512: in "MDSYS.SDO_INDEX_METHOD_9I", Zeile 368
ORA-06512: in Zeile 1
I use SRID = 8307, I want to use Geodetic Coordinate Support. For that reason, as I insert the information into the database, I just insert '8307' as the SRID both in the geo table and in the table user_sdo_geom_metadata. Except for that I did nothing which seems to be related to support geodetic coordination system. I think the problems might be here.
I am looking forward to helps.
Yiwei -
[Error when creating an index]
Hi there,
When i issue a create index statement, i get this error. On checking the ctx_indexes table, i see my index there. What is wrong and how can I rectify it?
-- error --
SQL> create index STAG_SCD_CONTENT_IDX on
SEARCH_DATA(SCD_CONTENT) indextype is
CTXSYS.CONTEXT;
create index STAG_SCD_CONTENT_IDX on
SEARCH_DATA(SCD_CONTENT) indextype is
CTXSYS.CONTEXT
ERROR at line 1:
ORA-29855: error occurred in the execution of
ODCIINDEXCREATE routine
ORA-20000: ConText error:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: ld.so.1: extprocPLSExtProc: fatal: libskgxp8.so:
open failed: No such file or directory
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
--------------------These errors can be caused by oracle not being able to find files in oracle standard directories.
In order to fix the problem, try this:
export TNS_ADMIN=$ORACLE_HOME/network/admin -
Error when creating BIA INDEX FOR CUBE
Hi
I am trying to create BIA index for a cube and I am getting error
"An error occurred. Choose "Continue" to start again from the beginning" in the second step. Could any body explain what this error mean and How to correct it.
and when I press BIA Moniter tab I am getting following message.
An error occurred. Choose "Continue" to start again from the beginning
"BIA Monitor Is Called for First Time
The RFC destination for the BI accelerator is not yet specified in the
system. Without the relevant entry in RSADMINA, the BIA monitor cannot
be executed. Do you want to enter the RFC destination now?"
Thanks in Advance
Sarath
Edited by: sarath kumar on Aug 21, 2008 9:42 AMHi,
Is there any way i can check bi accelerator installed or not for our bi server.I contacted basis team but they do not have any idea regarding this. but I heard from my ex colleage it is installed. and Reports from one cube is running very fast compared to recently created cube.
Thanks
Sarath -
Oracle intermedia error while creating the index
desc test
no number(2) primary key
name varchar2(20)
SQL> create index tindex on test(name) indextype is ctxsys.context;
create index tindex on test(name) indextype is ctxsys.context
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: ConText error:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: ld.so.1: extprocep_agt1: fatal: relocation error: file
/export/home/oracle8i/OraHome1/ctx/lib/libctxx8.so: symbol ociepgoe: referenced
symbol not found
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
what is the problem ??
i Add an entry in the tnsnames.ora:
extproc_connection_data =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = ipc)
(KEY = DBSID))
(CONNECT_DATA = (SID = ep_agt1)))
and
i Add the following in the listener SID_LIST:
(SID_DESC = (SID_NAME = ep_agt1)
(ORACLE_HOME = /oracle)
(ENVS = LD_LIBRARY_PATH=/oracle/ctx/lib)
(PROGRAM = extproc))
my os is sun solaris intel and oracle version is 8.1.5
nullTry the following:
1. Connect as ctxsys, and perform the following:
SQL> create or replace library dr$libx as '<ORA_HOME>/bin/oractxx8.dll';
2. Check the status of CTXSYS packages:
select object_name, status from user_objects where status like 'IN%';
OBJECT_NAME STATUS
DRIDISP INVALID
3. Re-compile any invalid packages (should be just dridisp) from the .plb file(s) in ?\ctx\admin
SQL> @<ORA_HOME>\ctx\admin\dridisp.plb
Package body created.
SQL> select object_name, status from user_objects where status like 'IN%';
no rows selected
conn test/test
SQL> create index simple_index on simple(text) indextype is ctxsys.context ;
Index created.
Notes
Note1. CONTEXT QUERIES WILL STILL NOT RUN.
SQL> insert into simple values (1, 'the cat sat on the mat') ;
1 row created.
SQL> commit;
Commit complete.
SQL> select pk from simple where contains(text, 'cat') >0 ;
select pk from simple where contains(text, 'cat') >0
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-06550: line 1, column 7:
PLS-00201: identifier 'CTXSYS.DR_REWRITE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Edit <ORA_HOME\admin\orcl\pfile\init.ora
where orcl is your database name
Remove the line "text_enable=true" and bounce the database.
SQL> select pk from simple where contains(text, 'cat') >0 ;
PK
1
Best Regards -
Getting the Error when creating the WSD(Web Service Defination)
Hello,
When I tried to create the WSD(Web Service Defination) through the Wizard or function module I am getting the error "Error during activation" and again it is giving the error "internal error ACTIVATE in WEBSERVICE Wizard;".
What will be the probable cause of this error.
Is I have to change some configuration
Please Suggest.
Thanks
VineetI have the same problem - error returned is
Error during activation
Message no. WS_TOOL085
but no further information is provided
But the Virtual Interface in the package does activate with no problem - so this is WSD specific!
Some help would be appreciated... -
Getting error when creating the new application
Hi Sandeep,,
wen iam creating the new application iam getting
An error occurred while processing this page. Check the log for details.
where shud i have check log details..
i have given the following iputs
in select tab:
datasource name :oradsn
calender:
custom:
prefix tp
perids per year 13
application;
test
description:
example
shared service project
unassinged
instance :newinstance
calender
Select the default currency for viewing data in the application.
Default Application Currency
USD $ United States of America dollar
Will your application support multiple currencies?
no
Standard Plan Types Name
Plan Type 1
could you please let me know the solutions for this
thanks and best regards,
Kishore1. As you are taking service, your database is oracle database, you might have created a user/schema .
2. When you are creating FDM application and that too providing details of database , there is a button 'options',which has more options like tablespace..etc.
3. If you have created a schema and it has a specific table space ,then you need to provide these details also.else, while creating a user, if you have selected everything as default, then no need to go to 'options'.
Thankx
Nick -
Error when creating the webi query
when i try to create a query based on template universes delivered with BOBJ webi (as eFashion) i get the following error
A database error occured. The database error text is: (CS) "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_wodbc3.dll (The specified procedure could not be found. )". (WIS 10901)
when i press help i get
Cause
The database that provides the data to this document has generated an error. Details about the error are provided in the section of the message indicated by the field code: .
Please help.ok i did
[error on access Webi WS 10901;
error on access Webi WS 10901
thx
Maybe you are looking for
-
What's wrong? Kernel panic when I try to reinstall my iMac G4
Hello everyone. This is my last ditch effort to salvage something from my iMac G4 before I bin it. To cut a long story short, the iMac was misbehaving, so I wiped its hard drive using target disk mode, and now, when I try to reinstall it using the or
-
Is it possible to transfer videos or movies from sony laptop to iphone 5s
is it possible to transfer videos or movies from sony laptop to iphone 5s
-
Wrong assignment field (ZUORN) using transaction MR08
Hi all, On SAP R/3 4.6b we run transaction MR01 with unplanned delivery costs. As we have some price differences, the FI document has a line with the right price diff. G/L account. This G/L account has its sort key field (ZUAWA) filled with code '013
-
Adjustment layers not opening mask anymore
On my laptop I choose an adjustment option and it creates a new layer and layer mask. On the imac it only creates the layer with the adjustment. I have to manually add the mask. I can't find a preference or setting or anything to get the two to be
-
How to remove all space into words non rank ?
I want remove any space more then one between words and make one space only between words : example : Before FullName jon acer sham jack narr sam haik dosk kam After FullName