Error when creatiing transport for process chain

Hi Experts,
I am trying to create a transport for a process chain, but when i click on the red truck i get the following error: Error in Object Editing: Edit objects seperately since they belong to different original systems.
Can you please advise me on how to resolve this issue? Thanks in advance.

Has this process chain or some components of it (for example IPAK) been brought from some other system?
Try collecting all the objects in RSA1/Transport connection - and see the directory entries for each subobject (txnSE03 or TADIR table). You may have to either change the source system for some objects (in SE03) or split the transport objects manually into multiple transports.

Similar Messages

Error when trying to execute process chain !!

guys,
i am getting following error ..
" Inconsistency in delta administration"
where sud i look and what sud i do ?
also, when i try to check the process chain, its showing error, and followinig is the descreption..
"@5D@ A type "Generate Index" process has to follow process "Execute InfoPackage" var.ZPAK_D7GU4Y3X6N71IHL2KX784RWPX in the chain @35@
thaks
Edited by: Hon Bon on Jul 9, 2010 6:37 PM

well,
there are 3 meta chain, which runs at 3 different time ( fixed , like 1st run at 8:00 am, 2nd on 6 pm and 3rd on midnite ) and all three meta chains are the same, these meta chain has this pc, which i m working on. and thats y i need to put discision , bcoz for all 3 times there are 3 diff. DTP has to execute.
so, in my descision i am giving half an hour time interval ( 8:00 am to 9:00 am) , (6pm to 7pm ) and ( midnite to 1 am)
so, depending upon the time , when the meta chain gets executed , from my PC the only on DTP gets executes. and other 2 gets fails. same way at 6 pm when once again meta chain gets executed and when it comes to my PC my 2nd descision gets setisfies and execute 2nd DTP with option 2. here option 1 and 3 dont work...and so on
also , i have mention following formula in my descision
option 1 --> Local Time >= '14:10:00' AND Local Time <= '14:55:00'
option 2---> Local Time >= '18:05:00' AND Local Time <= '18:20:00'
option 3 ---> Local Time >= '20:00:00' AND Local Time <= '20:30:00'
see, these gives you some more information..
thanks

Planning Sequence: Error when runnning in a Process Chain

When trying to run a planning sequence in a process chain (with the correct variable input variant) I receive the following error message:
Inconsistent input parameter (parameter: <unknown>, value <unknown>
When running this planning sequence in the modeler, it runs without errors.
Any help greatly appreciated.
Many thanks,
Matt

Hi,
Can you pls explain your requirement..
1)Are you trying to trigger this proces chain in the background?
2)Does the planning sequence which you are trying to execute in the process chain contains a planning function that is expecting some variables to be passed by the user?
Rgds
Shyam

Error in ODS activation in process chain

I am getting errors when activating request using process chains.
Error message is Message No. RSM1102.
Please suggest if any notes apply for this.
Regards,
Nitin

Hi,
This happens when data is not acceptable to ODS definition. Data need to be corrected in PSA.
Check for Infoobject which has caused this problem in the monitor details tabstrip. Delete request from datatarget after changing QM status to red. Correct data in PSA and update data back to datatarget from PSA.
Cheers
Raj

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Need a table for process chains of when these are scheduled!!

Hi,
I had like to have list of all the process chains and their schedules of how often these are loaded and whether been triggered by event or directly scheduled. If periodically scheduled then the period----
is there any table which can have the information as i said??
Raj

Hi....
process chain tables
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
Among all these tables I think.......
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process
Chains
RSPCPROCESSLOG Logs for the Chain Runs .........can help you.......
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 21, 2008 1:32 PM

Warnings while transporting a process chain

Dear all,
I am getting the below warning message when I am transporting my process chain into Quality. Due to this, the PC is now in inactive version in the target system.
The logs shows the below message
No destination maintained in target client 001 -> Not activated
Message no. RSPC085
Diagnosis
When activating a process chain, this is checked and scheduled. Both the checking of a process chain and its scheduling require that
1. the function is executed in the target client of the import and
2. the user executing the function has the appropriate authorizations.
This is usually the case for the BW background user
The function can be executed in the target client if an RFC logon occurs in the target client. An RFC destination must be predefined for this purpose. This destination is used for logon to the target client from client 000 during import postprocessing.
This destination does not exist in this system.
System Response
The process chain will not be activated, which means that it will not be checked, scheduled, or saved in an active version. The process chain will only be adjusted to the local situation (for example, key changes with objects that are dependent on the source system), and will not be saved in a modified version.
Procedure
Create a destination for the import postprocessing.
Can some one please help on this.
Thanks and Regards,
Srinivas

Thanks..
Yes, this is the first process chain we are transporting.
I tried maintaining the paramters in RSTPRFC with the below settings..
Client: BW client 001
Destination: TPBWMANDTRFC
User: ALEREMOTE
PWD: ************
I want to know whether the details of teh destination are correct. If so, are these settings need to be maintained in QA and Prod systems as well?
Thanks and Regards,
Srinivas

(Urgent)Transports of Process Chains

Hi,
I have transported the process chain to Quality.
In Development we tested and it worked fine.
But in Quality it failed saying "no variant found for a process compression".
Help me out.

Hi Indira,
Check out whether all the objects included in the process chain are also transported to Quality server.
The error might have occured becuase the corresponding object of a process in the process chain might not be active or missing in the quaality system.
Hope this helps,
Regards

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Create Package while transporting a process chain

I want to transport a process chain but while doing so it is asking for “package” name. I do not have authorization to tcode SE21 to create a Package. I checked with ABAPer and he also does not have access to SE21.
Is it mandatory to transport a process chain only via a “package”? Are there alternative methods available which you can suggest?

Thanks..
Yes, this is the first process chain we are transporting.
I tried maintaining the paramters in RSTPRFC with the below settings..
Client: BW client 001
Destination: TPBWMANDTRFC
User: ALEREMOTE
PWD: ************
I want to know whether the details of teh destination are correct. If so, are these settings need to be maintained in QA and Prod systems as well?
Thanks and Regards,
Srinivas

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Send Message Process prompting for "Process Chain to Check"

Hi, When I insert a "Send Message" Process into my chain I do get prompted to select the message.
1. When I do a pull down I am getting prompted for "Process Chain to Check".
If I select my current process chain I get an abend.
2. When I click create instead of select I get brought to a table maint "Controls the execution of Process Chains". It has process chain, Start Date, Start time, and an inactive checkbox.
Any guesses why it's asking for "Process Chain to Check"?
What is this maintenence table I'm being brought to just to create a message.
Sounds Like I've run into a bug?????
Can you help???

Found out this must be related to development from a previous consultant..
thanks

Undefined status for process chains

Hello,
- when do you choose undefined status (grey) for process chains? (in what cases)
Thanks

Hi ,
when you are defining the Pc in planning view , then the color will be grey . In checking view - it will be green ( Successful ) , Yellow ( warnings) Or Red ( Failure) .
In the joboverview also , above discussed colors are stated for the Pc 's accordingly ..
Hope this helps out

Error when creatiing transport for process chain

Similar Messages

Maybe you are looking for