Error when creating a new Virtual Machine from VMs and Templates

I try to created a VM from a Template. On a Step 1.5 (Install VM components) and falid. This is a error:
Error (10659)
Cannot run Sysprep on virtual machine SRV2k8test because the template does not have a virtual hard disk attached that has been generalized.
Recommended Action
Specify a template that has been generalized and then try the operation again.
we expect your help.

Sorry to dredge up an old topic - but got some really weird behavior.
I knew that I had to sysprep the vhdx's before bringing them into a template. I've done this (verified twice), and I still end up with the error list at the top of the thread:
Error (10659)
Cannot run Sysprep on virtual machine SRV2k8test because the template does not have a virtual hard disk attached that has been generalized.
Recommended Action
Specify a template that has been generalized and then try the operation again.
we expect your help.
I am running SCVMM 2012 R2, and things were actually running smooth as of three days ago. Templates built before then are still working and can be deployed with no problem.
However, building a new template today gives the above error when testing the deployment.
http://www.fortypoundhead.com

Similar Messages

  • Ubuntu 7.10 freeze when create a new virtual machine

    Hi
    We try to create a virtual machine using Ubuntu 7.10, but when boot it freeze when begin the ISO Loading.
    Log:
    Plex86/Bochs VGABios current-cvs 13 Nov 2007
    This VGA/VBE BIOS is released under the GNU LGPL
    cirrus-compatible VGA is detected
    HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $
    ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (10240 Mbytes)
    ata0 slave: Unknown device
    ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
    ata1 slave: Unknown device
    Booting from CD-Rom...
    ISOLINUX 3.36 Debian-2007-08-30 Copy....
    Loading...
    Please help us to complete the creation
    Ricardo Ramos

    Since Ubuntu is not officially supported for /on Oracle VM, I'm afraid you're kinda stuck on your own...
    But why not use one of the freely available Oracle Enterprise Linux-distro's or even one of the host-templates made by Oracle? These work for me, incl. the Oracle 11g-database.

  • Runtime Error when creating a new group

    I'm getting a runtime error when creating a new group on a site collection? 
    Thanks in advance

    The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
    In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
    Also Ensure the group name is not having any special/unsupported characters.
    Feel free to share the error screenshot/entry in the ULS logs.
    Please remember to click 'Mark as Answer' on the answer if it helps you
    Best Regards,
    Pavan Kumar Sapara
    s p kumar

  • Error creating Virtual Machine from Oracle VM Template Input/output error

    Hi,
    I'm creating a virtual machine from the Oracle VM Template (OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM) I downloaded from eDelivery. I keep getting this error.
    =========
    Check Agent Version
    Check Address and NetworkType
    Register virtual machine img
    Register virtual machine geninfo
    Register networks
    Register virtual disks
    CopyFromTemplateAsync:Call agent
    CopyFromTemplateCallBack
    CallBack:end-success:end:failed:<Exception: ['dd', 'if=/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/seed_pool/OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM/System.img', 'iflag=direct', 'of=/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/running_pool/39_E_BIZ_1213_APP/System.img', 'bs=1M'] => dd: reading `/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/seed_pool/OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM/System.img': Input/output error
    4872+0 records in
    4872+0 records out
    5108662272 bytes (5.1 GB) copied, 205.557 seconds, 24.9 MB/s
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSXUtility.py", line 354, in utl_cp_vm
    run_cmd(args=cmd)
    File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
    raise Exception('%s => %s' % (args, err))
    Update virtual machine status:Error
    ========
    After endless searches there doesn't seem to be a lot of information out there.
    Any help will be appreciated.
    regards
    Dave

    It looks like your disk drive may have bad sectors on it, and when the dd copy reaches those bad sectors, it reports an error. Check /var/log/messages on the OVM server to see if it reports disk errors.

  • Error when creating a DC in NWDI from a Local DC

    Hi Experts,
    I have created a Local DC using New -> Development Component Project.
    Now I am trying to Migrate the Local DC to NWDI DC.
    I am following the below steps to migrate.
    1. I am creating a New DC by Importing Configuration and then the SC's that are created are shown.Now I have disconnected from the NWDI.
    2. Now I am creating a NEW DC in the Local DC Window in Development Component Prepsective.
    3. After that I am copying the Folder under the Package Folder in the -local DC Project and pasting the same in the created new DC.
    Now I am getting thousands of errors, these are few examples of the same.
    1. com.sap cannot be resolved
    2. wdControllerAPI cannot be reolved
    3. the method wdGetAPI() is undefined for the type.
    Please help me in this regard.
    Thanks,
    Palani

    Hi Palani,
    Have a look at the following links:
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID1261140650DB11976447925064760543End?blog=/pub/wlg/5948
    Migrate Local DC to NWDI
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c81ebbd57f136fe10000000a1553f7/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/42/c81ebbd57f136fe10000000a1553f7/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/42/c8204dd57f136fe10000000a1553f7/frameset.htm
    Regards.
    Rajat

  • "Error When Creating the form" in "Salary Statement"-Benefits and Payments

    hi
    When I enter the option "Salary Statement" (in "Benefits and Payment")  shows me the error "Error When Creating the form"
    http://img571.imageshack.us/img571/9986/payroll1.jpg (in "Salary Statement")
    http://img153.imageshack.us/img153/3007/payroll2.jpg  (My Error -  "Error When Creating the form")
    but, my sap system has Payroll customized, check it entered this tcode RPCEDTE0 I also put the appropriate values to obtain a good result.
    http://img716.imageshack.us/img716/2544/payroll5.jpg (screen RPCEDTE0)
    http://img541.imageshack.us/img541/1593/payroll6.jpg (result RPCEDTE0, Remuneration Statement correctly)
    What I must customize addition to Payroll(back-end) to run this option of "Salary Statement"?
    I hope for posts and helps,
    Ivan

    hi Sandip
    I clear the temporary files, but the error persist.
    I think so,  my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
    thanks for your post and helps,
    Ivan

  • Error when creating a new Organization in Deployment Manager

    I am trying to create a new Organization to an existing CRM environment and I keep getting the error below. The user deploying the new Organization has full control on all the security groups and Admin rights on the servers that Host SQL and CRM
    application. The CRM environment is 2011 on Premise that has been setup for IFD.
    We currently have 2 other organizations that are already in the environment, so the new org would be a third. I am more than glad to provide any firther information that I have to anyone that can help us resolve this issue. I also have a log file that I
    saved after the failed creation attempt. I can provide the contents of the log file to anyoen who can help. Its too long to add here.
    The section of the log file that shows the error is just above the screen shot. It looks like a deletion error. My queston is why is there an attempt at deleting anything if all I am trying to do is create a new Organization. This is not an import or
    upgrade.
    15:03:16|  Error| System.Exception: Action Microsoft.Crm.Tools.Admin.ImportDefaultDataAction failed. ---> Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: delete from [ConnectionRoleObjectTypeCodeBase]
     OUTPUT DELETED.[ConnectionRoleObjectTypeCodeId], 3233
     into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
     where ([ConnectionRoleObjectTypeCodeId] = '952fda76-2f70-e411-bfa3-005056b10f95')

    Hi All,
    I am also getting similar error 
    Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: 
    delete from [CustomerAddressBase]
    OUTPUT DELETED.[CustomerAddressId], 1071
    into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
    where ([CustomerAddressId] = 'fbb57633-a54f-e411-80ca-005056947598')
    I am getting this error when I am trying to delete all existing customer address and then try to create a new address for a customer.
    So its a kind of blanket update to all existing one replaced with new one.
    Please let me know if any one having solution to this 

  • Approval workflow error when creating a new custom entity in FIM 2010 R2

    Hello,
    i'm hoping somebody here can help, me i've been struggling with this for some time now. On a fresh FIM installation i create a custom entity named "Role" and add a few custom attributes.
    I then create an approval workflow and MPR for normal users to create entities of type Role, but another user must approve this request. The other user has a working mailbox - i've tried firing an action workflow that sends a mail notification when someone
    creates a new role and it is working fine. But, when i enable my approval workflow (the only field i changed from default is the approver) on the MPR, the workflow always failes with the message:
    Error processing your request: The operation was rejected because of access control policies.
    Reason: The server workflow rejected the operation.
    Attributes:
    Correlation Id: 750a558a-d3e4-4216-b16a-e76d79f011ec
    Request Id: feaabbc9-dea4-49a3-8b29-65b77de6f8fd
    Details: The Workflow Instance '04202cc0-14a3-410c-a3fc-2d6e5d25ebe6' encountered an internal error during processing. Contact your system administrator for more information.
     I enabled tracing and this is what i found:
    Microsoft.ResourceManagement Verbose: 0 : Creating WorkflowServiceHost for XOML Definition:\n<ns0:SequentialWorkflow ActorId="00000000-0000-0000-0000-000000000000" RequestId="00000000-0000-0000-0000-000000000000" x:Name="SequentialWorkflow"
    TargetId="00000000-0000-0000-0000-000000000000" WorkflowDefinitionId="00000000-0000-0000-0000-000000000000" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
    xmlns:ns1="clr-namespace:System.Workflow.Activities;Assembly=System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856
        ThreadId=8
        DateTime=2013-09-04T15:17:10.0496188Z
    Microsoft.ResourceManagement Information: 1 : 1 :  : Invalid Element 'ReceiveActivity.WorkflowServiceAttributes' found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
        ThreadId=8
        DateTime=2013-09-04T15:17:10.1277486Z
    Microsoft.ResourceManagement Information: 1 : 1 :  : Invalid data found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
        ThreadId=8
        DateTime=2013-09-04T15:17:10.1277486Z
    Microsoft.ResourceManagement Verbose: 0 : A WorkflowRuntime is not available for this WorkflowDefinitionVersionKey '20'.
        ThreadId=8
        DateTime=2013-09-04T15:17:10.1277486Z
    Microsoft.ResourceManagement Error: 3 : Workflow host activation failed for workflow definition id : 231457c6-d044-4cc7-839f-98e5cf88f514, version key: 20. Exception: Object reference not set to an instance of an object.   at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.ActivateHost(ResourceManagementWorkflowDefinition
    workflowDefinition, Boolean suspendWorkflowStartupAndTimerOperations)
       at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.RetrieveWorkflowDataForHostActivator()
        ThreadId=8
        DateTime=2013-09-04T15:17:10.1277486Z
    Microsoft.ResourceManagement Information: 1 : The service has updated the list of active hosted workflow definitions to sequence number '1'.
    This happened on two separate FIM deployments, but both of them were set up in the same way. What am i missing here?
    Thank you,
    Martin

    (...) What am i missing here? (...) - Sharepoint 2013 and probable bug in FIM related to it. Check this thread for workaround
    and resolution:
    http://social.technet.microsoft.com/Forums/en-US/1b76672d-1276-4c71-b9fc-5bb1fcb36877/event-id-3-with-approval-activity?forum=ilm2
    Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

  • Error when creating a new Data Source

    All, This is on BI Publisher 11g.
    When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    what am i doing wrong?
    Thank you for reading this post.
    Thanks,
    R

    The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
    As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
    The JDBC is working ... I can test the connection successfully ... just wont save the entry
    Edited by: tread on Oct 17, 2011 11:55 AM

  • Error when creating a new JMS connection factory in GlassFish V3 b57

    When I use the admin console and try to create a new JMS connection factory in GlassFish V3 b57, the operation fails with the error message
    An error has occurred: Can't find ConfigModel.Property for attr -connection-validation-required on interface com.sun.enterprise.config.serverbeans.ConnectorConnectionPool
    Should I better report this in the GlassFish news forum (http://forums.java.net/jive/forum.jspa?forumID=56&start=0)?
    p.s. I launch the admin console from within NetBeans 6.7.1 (the server started before the IDE). WIth version b 56, creating a JMS connection factory worked fine.
    Best regards,
    Michael Justin

    This bug does not apear in the nightly build (b58) now so everything looks fine again.
    Greetings,
    Michael

  • Error when create a new asset ----ASSERTION_FAILED

    Hi,
    I have installed EHP4 FOR SAP ERP 6.0 / NW7.01 and when create new asset with AS01 and try to save the system show me the next runtime errors:
    ASSERTION_FAILED" " "
    CL_FAA_CFG_DEPRAREA_ERP=======CP" or "CL_FAA_CFG_DEPRAREA_ERP=======CM009"
    SETDATA_DERIVATION"
    What happened?
        In the running application program, the ASSERT statement recognized a
        situation that should not have occurred.
        The runtime error was triggered for one of these reasons:
        - For the checkpoint group specified with the ASSERT statement, the
          activation mode is set to "abort".
        - Via a system variant, the activation mode is globally set to "abort"
          for checkpoint groups in this system.
        - The activation mode is set to "abort" on program level.
        - The ASSERT statement is not assigned to any checkpoint group.
    I have implemented the note 325531 but no result.
    Do you have any ideea?
    Regards,
    Ionel

    Hi all,
    I have the same problem. I have executed the report RACORR11 mentioned in OSS note 325531 but no changes I still get the dump when I want to save the asset. In my system the report RACORR122 is not available. In the customizing system the asset creation works fine w/o dump but in the test system I get the dump. I have compared the derived depreciation areas in table T093B in customizing and test system and there are the same entries. All transports have been transported from customizing to test system.
    Does anybody have any ideas whatelse can be done to overcome the dump?
    Thanks, Christopher

  • Running into strange errors when creating a new instance

    Hello:
    I am running 9.2.0.8 on a Windows 2003 Server.
    When I try to create a new instance, I chose a New Database/UTF-8/16KB Block Size. Everything else was default value. However, I get a "ORA-29807: specified operator does not exist" error. When I looked into the Create log file, the file, CreateDBCatalog.log has the following errors:
    No errors.
    No errors.
    drop table AUDIT_ACTIONS
    ERROR at line 1:
    ORA-00942: table or view does not exist
    No errors.
    CREATE ROLE exp_full_database
    ERROR at line 1:
    ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
    CREATE ROLE imp_full_database
    ERROR at line 1:
    ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
    drop table system.logstdby$skip_support
    ERROR at line 1:
    ORA-00942: table or view does not exist
    Warning: View created with compilation errors.
    Warning: View created with compilation errors.
    CREATE ROLE exp_full_database
    ERROR at line 1:
    ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
    CREATE ROLE imp_full_database
    ERROR at line 1:
    ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
    drop synonym DBA_LOCKS
    ERROR at line 1:
    ORA-01434: private synonym to be dropped does not exist
    drop view DBA_LOCKS
    ERROR at line 1:
    ORA-00942: table or view does not exist
    No errors.
    drop package body sys.diana
    ERROR at line 1:
    ORA-04043: object DIANA does not exist
    drop package sys.diana
    ERROR at line 1:
    ORA-04043: object DIANA does not exist
    drop table sys.pstubtbl
    ERROR at line 1:
    ORA-00942: table or view does not exist
    drop package body sys.diutil
    ERROR at line 1:
    ORA-04043: object DIUTIL does not exist
    drop package sys.diutil
    ERROR at line 1:
    ORA-04043: object DIUTIL does not exist
    drop procedure sys.pstubt
    ERROR at line 1:
    ORA-04043: object PSTUBT does not exist
    drop procedure sys.pstub
    ERROR at line 1:
    ORA-04043: object PSTUB does not exist
    drop procedure sys.subptxt2
    ERROR at line 1:
    ORA-04043: object SUBPTXT2 does not exist
    drop procedure sys.subptxt
    ERROR at line 1:
    ORA-04043: object SUBPTXT does not exist
    No errors.
    No errors.
    No errors.
    No errors.
    drop type dbms_xplan_type_table
    ERROR at line 1:
    ORA-04043: object DBMS_XPLAN_TYPE_TABLE does not exist
    drop type dbms_xplan_type
    ERROR at line 1:
    ORA-04043: object DBMS_XPLAN_TYPE does not exist
    No errors.
    DROP TABLE ODCI_SECOBJ$
    ERROR at line 1:
    ORA-00942: table or view does not exist
    DROP TABLE ODCI_WARNINGS$
    ERROR at line 1:
    ORA-00942: table or view does not exist
    No errors.
    No errors.
    No errors.
    No errors.
    drop sequence dbms_lock_id
    ERROR at line 1:
    ORA-02289: sequence does not exist
    drop table dbms_alert_info
    ERROR at line 1:
    ORA-00942: table or view does not exist
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    drop table SYSTEM.AQ$_Internet_Agent_Privs
    ERROR at line 1:
    ORA-00942: table or view does not exist
    drop table SYSTEM.AQ$_Internet_Agents
    ERROR at line 1:
    ORA-00942: table or view does not exist
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    DROP SYNONYM def$_tran
    ERROR at line 1:
    ORA-01434: private synonym to be dropped does not exist
    DROP SYNONYM def$_call
    ERROR at line 1:
    ORA-01434: private synonym to be dropped does not exist
    DROP SYNONYM def$_defaultdest
    ERROR at line 1:
    ORA-01434: private synonym to be dropped does not exist
    DBMS_DEBUG successfully loaded.
    PBUTL     successfully loaded.
    PBRPH     successfully loaded.
    PBSDE     successfully loaded.
    PBREAK     successfully loaded.
    DROP TYPE SYS.RewriteMessage FORCE
    ERROR at line 1:
    ORA-04043: object REWRITEMESSAGE does not exist
    DROP TYPE SYS.RewriteArrayType FORCE
    ERROR at line 1:
    ORA-04043: object REWRITEARRAYTYPE does not exist
    DROP TYPE SYS.ExplainMVMessage FORCE
    ERROR at line 1:
    ORA-04043: object EXPLAINMVMESSAGE does not exist
    DROP TYPE SYS.ExplainMVArrayType FORCE
    ERROR at line 1:
    ORA-04043: object EXPLAINMVARRAYTYPE does not exist
    No errors.
    drop view sys.transport_set_violations
    ERROR at line 1:
    ORA-00942: table or view does not exist
    drop table sys.transts_error$
    ERROR at line 1:
    ORA-00942: table or view does not exist
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    No errors.
    drop operator XMLSequence
    ERROR at line 1:
    ORA-29807: specified operator does not exist
    What does this mean?
    venki
    Edited by: thevenkat on Mar 11, 2009 10:17 PM

    Venki,
    The ORA-00942 is okay because there is no existing object. But what stuck me is the ORA-01921 error which may indicate that this might not be a new database.
    CREATE ROLE exp_full_database
    ERROR at line 1:
    ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
    CREATE ROLE imp_full_database
    ERROR at line 1:
    ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
    Are there any existing databases on this server? Have you tried to create it on other machine?I searched on Metalink too and found Doc ID: 237486.1 ORA-29807 Signalled While Creating Database using DBCA which say that eroror could be ignored. You may want to review that as well.
    Ittichai

  • SCSM Authoring Tool verification error when creating a new property

    I am needing to add several new fields to an existing customized ServiceRequest Extended Form.  Using SCSM I exported the management pack (as a bundle) and then used PowerShell to export to a .xml.   Now when I open the class and try
    to create a new property I get an error stating:
    The management pack could not be verified due to this error:
    Verification failed with 1 errors:
    Error 1:
    Found error in ...servicerequestextendedform.category with message:
    The Target attribute value is not valid.  Element ....ServiceRequestExtendedForm.Category references a Target element that cannot be found.
    I am very new to this.   Any help would be greatly appreciated!

    you probably want to go back to original sources, rather then exporting from Service Manager, since the export will break any sealing and might cause issues when authoring or resealing. 
    You'll also need :
    a Sealed version of the class extension, since this is going to need to be loaded into the authoring tool before you see the extra properties,
    an unsealed copy of the MP that contains the form customization, so you can edit it 
    the original key used to seal the current customization, so you can seal the upgraded form using the same key so it will upgrade the MP correctly in your production environment.
    The specific error you're running into looks like a MP reference error, but it's hard to be sure without seeing the original XML. i'd make sure that you have opened the sealed versions of any other MPs this MP depends upon. 

  • PLS-00428 Error when creating a new trigger

    Hi,
    I'm encountering the PLS-00428 error when I run the script below.
    CREATE OR REPLACE TRIGGER TIBCOUSER.po_response_trigger
    BEFORE INSERT ON po_response FOR EACH ROW
    BEGIN
    IF:NEW.ariba_processsequence is null then
    SELECT pttransid AS pttransid, 'Product Test Pass 1' AS pttransname, aribaorderid AS aribaorderid, '0' AS errorcode, '' AS MESSAGE, SYSDATE AS ariba_insertdate
    FROM po_request
    WHERE adb_l_delivery_status = 'N';
    UPDATE po_request
    SET adb_l_delivery_status = 'C'
    WHERE adb_l_delivery_status = 'N';
    END IF;
    END;
    Can someone point out what is missing or what is wrong with the script? Any help would be much appreciated.
    Regards,
    Jigger

    Hi Jigger,
    I was able to create the trigger using the script below.That's nice, you got the trigger created. Below is your trigger, I have added some comments.
    create or replace trigger tibcouser.po_response_trigger
       before insert or update
       on po_response
       for each row
    declare
      -- 1. These variables should really be anchored to po_response
      -- 2. They should be named differently than columns in po_response
      -- 3. It seems that you don't need them (See 7.)
       pttransid               integer := null;
       pttransname             varchar2(255) := null;
       aribaorderid            varchar2(255) := null;
       errorcode               integer := null;
       message                 varchar2(255) := null;
       ariba_insertdate        date := null;
       adb_l_delivery_status   char(1) := null;
    begin
      -- 4. This is never true, since adb_l_delivery_status is null, here
          -- So, I guess your trigger never does anything, so in a sense it works
       if (adb_l_delivery_status = 'N')
       then
        -- 5. This select  will raise too_many_rows, when there is more than one record in po_response.
        -- 6. It seems you will have a problem with mutating table
        -- 7. The select doesn't do anything, you never use any of the values selected
        -- 8. The select is confusing, since variables are named equally to columns
        -- 9. You select constants, why not just assign them right away
        select pttransid
                ,pttransname
                ,aribaorderid
                ,'0'
                ,sysdate
            into pttransid
                ,pttransname
                ,aribaorderid
                ,errorcode
                ,message
                ,ariba_insertdate
            from po_response;
          -- 10. This update will update ALL records in po_request, probably not what you want.
          update po_request
             set adb_l_delivery_status = 'C';
       end if;
    -- 11. Good practise dictates end po_response_trigger;
    end;
    /In general, when you think your post has been answered, then kindly mark it as such.
    Regards
    Peter

  • Error When Creating/Inserting New Marketing Attribute Value

    Merry Christmas & Happy New Year,
    Need help here, when I create/insert new marketing attribute value in existing marketing attribute, I encounter the following error "The values currently maintained lead to inconsistencies in the database".
    In the detail error, it specifies that I was trying to change existing attribute which is not true.
    Initially i thought it was authorization issue, but when i do the same procedure in CRM GUI, it works fine, only from Web UI then i encounter the problem.
    Any lead is really appreciated.
    JD

    Hi Robert,
    thanks for the info, we did implement the note but still having the error.
    we also have implemented following notes but it still does not solve the issue yet.
    0001486409 Incorrect counting in CRM_MKTPFCHR_CHECK_STRING_BW
    0001490425 Nonsensical values for marketing attributes
    0001491491 Field DATUV in AUSP for newsletter scenario
    0001499712 Marketing  Attributes are not saved properly in WEB UI
    0001509448 MKT ATTR:Save value for marketing attribute impossible
    0001531447 Problems in CL_CRM_BUIL_MKT_ATTRIB~READ

Maybe you are looking for