Error - when creating a standby database with EM 10g Grid Control

Hi,
I am experiencing some problems when I want to create through the EM 10g Grid Control a standby database from a allready existing db. At step 2 when the files should be generated and copied to the other system, I am always getting the error that there isn't enough disk space on the other system. This can't be because there is at least 30GB free and the installer is asking for less than 1GB. I was searching the whole internet for a solution to this issue, but there was just nothing that could help me out with that point...
Has someone an idea at this point? Thanks for helping...
I am working on a Windows 2003 Server - Enterprise Edition for every system (Grid Control, Primary DB and Standby DB).
Best regards,
Patrick.

Check that filesystem space using GC under targets>hosts on which you are trying to create standby. Do you have any specific error message from GC ? If GC shows proper size under host filesystem section then there shuld be no such problem. Double chk ur locations too.
Regards,
http://askyogesh.com

Similar Messages

How to create logical standby database without using Oracle Grid Control

Hi All,
I want to create Logical standby database on 11gr2 on RHEL 5 without using oracle Grid Control.
I already have a primary database as well as physical standby database.
What i want to create a logical standby database as well on the same machine where physical standby database is running.
So anyone of you help me out to do that
Thanks in advance

Hi,
Creating a Logical Standby Database
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm#SBYDB00300
Regards,
Tom

Dgutil.pl line 93 ERROR when creating 11.1.0.7 dataguard via GRID CONTROL.

I trying to create a DG from a two node RAC instance.
All the machines are at the same patch levels and OS levels (11.1.0.7/Solaris 2.10). Our GRID CONTROL is at 10.2.0.5 and patched to what I think is the latest level.
The wizards works fine and the creation process creates the duplicate DB without any problems. When it gets to the very last step (#13 CREATE STANDBY DATABASE) I get this error:
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
dgcreate.DGgetRecoverySCN102: SELECT CHECKPOINT_CHANGE# FROM V$DATABASE
dgcreate.DGrecoverStby102: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE UNTIL CHANGE 3038710446200
dgcreate.DGrecoverStby102: ALTER DATABASE OPEN READ ONLY
*10458 at /u01/app/oracle/product/agent10g/sysman/admin/scripts/db/dg/dgutil.pl line 93.*
Anyone run into this before?

I recreated the STANDBY again (same error).
Here is the tail end of the alert log on the standby:
Media Recovery Not Required
Signalling error 1152 for datafile 1!
ORA-1547 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE UNTIL CHANGE 3038791960334...
ALTER DATABASE OPEN READ ONLY
Data Guard Broker initializing...
Data Guard Broker initialization complete
Signalling error 1152 for datafile 1!
Beginning standby crash recovery.
Fast Parallel Media Recovery enabled
Managed Standby Recovery starting Real Time Apply
parallel recovery started with 15 processes
Media Recovery Log +ELM1DATA/egstby1/archivelog/2010_08_17/thread_1_seq_395.427.727280107
Media Recovery Waiting for thread 2 sequence 402
Standby crash recovery need archive log for thread 1084416 sequence 1089759 to continue.
Please verify that primary database is transporting redo logs to the standby database.
Standby crash recovery aborted due to error 16016.
Errors in file /u01/app/oracle/diag/rdbms/egstby1/egstby1/trace/egstby1_ora_19850.trc:
ORA-16016: archived log for thread 2 sequence# 402 unavailable
Shutting down recovery slaves due to error 16016
Recovery interrupted!
Tue Aug 17 14:15:44 2010
RFS[6]: Assigned to RFS process 20207
RFS[6]: Identified database type as 'physical standby': Client is ARCH pid 24808
Completed standby crash recovery.
Signalling error 1152 for datafile 1!
RFS[6]: Opened log for thread 2 sequence 403 dbid 1850521674 branch 726078384
ORA-10458 signalled during: ALTER DATABASE OPEN READ ONLY...
Archived Log entry 4 added for thread 2 sequence 403 rlc 726078384 ID 0x6e4d4647 dest 2:
Tue Aug 17 14:16:06 2010
RFS[7]: Assigned to RFS process 20257
RFS[7]: Identified database type as 'physical standby': Client is ARCH pid 8783
Tue Aug 17 14:16:06 2010
RFS[8]: Assigned to RFS process 20259
RFS[8]: Identified database type as 'physical standby': Client is ARCH pid 24819
Tue Aug 17 14:16:06 2010
RFS[6]: Opened log for thread 1 sequence 396 dbid 1850521674 branch 726078384
Archived Log entry 5 added for thread 1 sequence 396 rlc 726078384 ID 0x6e4d4647 dest 2:
Tue Aug 17 14:16:07 2010
RFS[5]: Opened log for thread 2 sequence 404 dbid 1850521674 branch 726078384
Archived Log entry 6 added for thread 2 sequence 404 rlc 726078384 ID 0x6e4d4647 dest 2:

Creating a Standby Database with the Same Directory Structure

Hello gurus,
I am self-learning the feature Oracle Data Guard, so I am testing it on Oracle 10g R2.
At Oracle documentation there is a section F.4.: Creating a Standby Database with the Same Directory Structure*, that explains how to create a standby database with RMAN but there is something that I don´t understand:
In the standby server, I created a database with the SID equal to production database* with the objetive to have the same directory structure, but when I try to startup nomount the standby database with pfile appear this expected error:
ORA-16187: LOG_ARCHIVE_CONFIG contains duplicate, conflicting or invalid attributes
So my question is: Is possible have the Same Directory Structure on both: Production and StandBy server?
Thanks in advanced.

Uwe and mseberg: thanks for your quick answers
I have a doubt: How can you have the same directory structure if you have differents SIDs?, for example if you follow the OFA suggestions you would must have:
On Production server: */u01/app/oracle/oradata/PRIMARY/system.dbf*
On StandBy server: */u01/app/oracle/oradata/STANDBY/system.dbf*
Or you created the directory structure manually on StandBy server? For example replacing the string STANDBY* to PRIMARY* before create the database using dbca.
Do you understand my doubt? Excuse me for my english.
Thanks.

Can i create a standby database in oracle 10g standared edition ?

what are the steps required for creating a standby database using oracle 10g standard edition. or Any other feature for mirroring database in oracle 10g standared edition

Dear mithun,
Please read the following online documentation;
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm
+"+
+2.3.2 Oracle Software Requirements+
+The following list describes Oracle software requirements for using Data Guard:+
+* Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle Database Standard Edition. This means the same release of Oracle Database Enterprise Edition must be installed on the primary database and all standby databases in a Data Guard configuration.+
+Note:+
+It is possible to simulate a standby database environment with databases running Oracle Database Standard Edition. You can do this by manually transferring archived redo log files using an operating system copy utility or using custom scripts that periodically send archived redo log files from one database to the other. The consequence is that this configuration does not provide the ease-of-use, manageability, performance, and disaster-recovery capabilities available with Data Guard.+
+"+
Hope That Helps.
Ogan

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

Problem creating physical Standby database with RMAN

Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.

Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again

Getting errors while creating a Standby database

Hi,
I have Oracle 9.0.2 installed on windows xp machine , the sid of the database is oradata. Now i am trying to create a standby database on same machine and the sid of the database is oratest. i have followed the required steps.
a. Firstly i have configured the required parameters in the init.ora parameters of standby database
b. Secondly , i created the standby control file on primary database.
c. while mounting the standby database i am getting the following error.
Database name "ORADATA" its should be "ORATEST"
Could you please help me in resolving this issue? and also if possible. please jot down the procedure for creating the standby database.
Thanks
Vj0011590

Hi,
I have Oracle 9.0.2 installed on windows xp machine ,
the sid of the database is oradata. Now i am trying
to create a standby database on same machine and the
sid of the database is oratest. i have followed the
required steps.
a. Firstly i have configured the required parameters
in the init.ora parameters of standby database
b. Secondly , i created the standby control file on
primary database.
c. while mounting the standby database i am getting
the following error.
Database name "ORADATA" its should be "ORATEST"I didn't see you copy the cold backup db from primary to standby.
and the error is coming from init.ora in your standby db. check it again.

Error when creating billing / accounting document with VF01

Hi All,
When I use VF01 to create an invoice with reference to a LF D/N, I got the following error after saving.
"An exchange rate type is not defined for country CN
Message no. FF 802". And billing document is created but with no accounting document.
I checked the exchange rate type is defined. but I can not find the place where I can assign to the specific country.
Best Regards
Jean

Thanks for your help.
Hi Dave,
I checked in S_BCE_68000174, it has been already assigned.
Hi Ferry,
In FTXP, the tax code has been maintained.
And you are right, when I maintain the field KURST in table T005, it is ok. But I am confused in 4.6C, the field KURST can be maintained by T-code OY01, but in 470, exchange rate type cannot be found in OY01. Where can I set in 470? And why in 470, even field KURST is empty in table T005, but there is no such error when creating billing document?
Many Thanks
Jean

Got error when creating a standby DB from rman: no backup or copy... Why?

We try to create standby database from a production DB on another server (10.2.0.4). The RMAN backup is in the nfs file system which is also mounted to the target server (the DR box). So, the access path for the rman backup is the same look from primary DB server and DR DB server. I started the RMAN run:
RMAN> RUN
2> {
3> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
4> ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
5> DUPLICATE TARGET DATABASE for standby
6> nofilenamecheck
7> dorecover;
8> }
9>
10> exit
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=582 devtype=DISK
allocated channel: aux2
channel aux2: sid=584 devtype=DISK
Starting Duplicate Db at 21-JUN-12
contents of Memory Script:
set until scn 12198261770353;
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
executing command: SET until clause
Starting restore at 21-JUN-12
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/21/2012 16:33:36
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
===========================================================================
The backups should have controlfile. There is rman show all display:
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backup/inbound/online/controlfile_auto%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/backup/inbound/online/%d_%T_%t_%s';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/backup/inbound/online/snapcf_inbound.f';
Why and how to fix? Thanks for help!

Here is the list of command:
RMAN> list backup of controlfile ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
5518 Full 4.57M DISK 00:00:07 17-JUN-12
BP Key: 5518 Status: AVAILABLE Compressed: NO Tag: TAG20120617T035926
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120617-00
Control File Included: Ckp SCN: 12197994840698 Ckp time: 17-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5522 Full 4.57M DISK 00:00:00 18-JUN-12
BP Key: 5522 Status: AVAILABLE Compressed: NO Tag: TAG20120618T010158
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120618-00
Control File Included: Ckp SCN: 12198041382572 Ckp time: 18-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5526 Full 4.57M DISK 00:00:01 19-JUN-12
BP Key: 5526 Status: AVAILABLE Compressed: NO Tag: TAG20120619T010352
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120619-00
Control File Included: Ckp SCN: 12198090424606 Ckp time: 19-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5530 Full 4.57M DISK 00:00:02 20-JUN-12
BP Key: 5530 Status: AVAILABLE Compressed: NO Tag: TAG20120620T010304
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120620-00
Control File Included: Ckp SCN: 12198146424201 Ckp time: 20-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5534 Full 4.57M DISK 00:00:02 21-JUN-12
BP Key: 5534 Status: AVAILABLE Compressed: NO Tag: TAG20120621T010357
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120621-00
Control File Included: Ckp SCN: 12198210334547 Ckp time: 21-JUN-12
==================================================================
I tried to catalog the controlfile:
RMAN> catalog controlfilecopy '/backup/inbound/online/controlfile_autoc-2080040856-20120621-00';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of catalog command on default channel at 06/21/2012 17:24:32
ORA-19563: control file header validation failed for file /backup/inbound/online/controlfile_autoc-2080040856-20120621-00
====================================================================
We have level 1 backup everyday, except Sunday. I have level 0 backup on Sunday. I alos tried the metalink note RMAN Duplicate For Standby Fails with Rman-06024: No Backup Or Copy Of The Control File Found To Restore [ID 466321.1]. It does not work.
Thanks for help!

Getting errors when creating physical standby.

Hello All,
i am getting following error when i creating a physical standby for production,
i used below command to do it
duplicate target database to standby dorecover;
after some time it throwed this error.
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DATA/solfho2/datafile/system.382.764328493'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/12/2011 13:04:06
RMAN-03015: error occurred in stored script Memory Script
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/arch/SOLFHO2/PROLHO01_1_25224_740461103.arc'
ORA-16145: archival for thread# 1 sequence# 25224 in progress

Hello;
Looks like a do over.
I have my short notes here:
http://www.visi.com/~mseberg/duprman2.html
This has been tested several times.
Best Regards
mseberg

Error when creating a BSSV (Database Vaue Object Class) in E1 Demo

Hi All,
I am getting the following error while creating BSSV
Can not load Table/View records - [DATABASE_CONNECT_FAILED] Database Connection failed for DataSource Object Librarian Local.class com.jdedwards.database.base.JDBException
any solution
Edited by: KANN on Oct 18, 2012 8:05 PM

Guys,
I got it. The name of the view was not named starting with 'Z'. So I renamed it as 'ZREQ_DAT' and it works now.
Thanks,
Sirish.

Error when creating a travel request with Advance amount

Hi Gurus,
When I create a travel request with an Advance amount and try to save the same, the system throws up an error msg : "Trip country does not exist in the system (T005).
However, it allows me to create the travel request without this error if i dont enter any advance amount in the travel request.
I checked the tables V_T706L and V_T706O and found my trip county to be existing.
Regards
Prakash

Hello Prakash,
The following are the prerequisites for transferring trip costs to accounting. In other words when you try to create and save a travel request with advance you are involving accounting entries and therefore the following needed to be checked:
1.Travel Management and Accounting are both at Release 4.5A. If at least one of the systems
has a release level lower than 4.5A, follow the instructions in Customizing for ALE.
2. For payment to be effected, vendor accounts must exist in Accounting for the respective
personnel numbers.
3. The following Accounting tables must be replicated in the Travel Management System using
Customizing transports:
Company Codes (T001)
Countries (T005)
Input Tax Codes (T007A, T007S)
Document Types (T003)
4. The transfer of settlement results
More relevant in your case would be the point 3. Countries(T005) not defined in TM.
Hope the above provided you more information.
Rgds
CONMJI

Creating physical standby databases with DG Broker & OEM

Hi guys,
I manage 8i, 9i & 10g databases through OEM 10.2.0.2.
Today, I would like to create physical standby db for the most important applications. Because I'm a lazy guy, I'd like to do it the easiest way, with GUI and wizzards provided by OEM.
1. Do you know any tutorial on the Internet that would help to do it easily ? My only source up to now is the official DB broker documentation (http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/toc.htm), which is 300 pages long like every Oracle doc. I'd appreciate any tutorial that could lead me straight to the essential. I've heard that is not so tricky to create a physical standby db
2. Is the procedure really different to create (and then manage) a physical standby database on Oracle 8i, 9i and 10g ? Is it possible to do it through DB Broker and OEM for every version ?
thank you for your help
Antoine

Antionio,
Oracle Documentation is the best source of configuring any Oracle component.
But, If you do not want to read the entire doc, and want to configure Dataguard Broker (without OEM), then here is the Link.
http://www.oracledba.org/10g/dr/10gR2_dataguard_RAC_to_RAC.html#Configure_Dataguard_Broker:

Error when creating a new database on oracle 9i release 2

hi friend,
i have a question when i create new database manually then i get error.
error like this
create database alauki
error at line 1:
ORA-01092 : ORACLE instance terminated. Disconnection forced
the alert log file is
Dump file e:\ritesh\alauki\bdump\alert_alauki.log
Mon Jan 02 06:42:47 2006
ORACLE V9.2.0.1.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 2, CPU type 586
Mon Jan 02 06:42:47 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.1.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 50331648
large_pool_size = 8388608
java_pool_size = 33554432
control_files = E:\RITESH\DATA\CONTROL01.CTL, E:\RITESH\MIRROR\CONTROL01.CTL
db_block_size = 8192
db_cache_size = 25165824
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = ALAUKI
dispatchers = (PROTOCOL=TCP) (SERVICE=ALAUKIXDB)
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = E:\RITESH\ALAUKI\bdump
user_dump_dest = E:\RITESH\ALAUKI\udump
core_dump_dest = E:\RITESH\ALAUKI\cdump
sort_area_size = 524288
db_name = ALAUKI
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Mon Jan 02 06:43:02 2006
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jan 02 06:43:07 2006
alter database mount exclusive
Mon Jan 02 06:43:08 2006
ORA-09341: scumnt: unable to mount database
OSD-04400: unable to acquire internal semaphore for process
O/S-Error: (OS 183) Cannot create a file when that file already exists.
Mon Jan 02 06:43:08 2006
ORA-1102 signalled during: alter database mount exclusive...
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 3
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S000' to die
All dispatchers and shared servers shutdown
Mon Jan 02 06:46:03 2006
alter database close normal
ORA-1507 signalled during: alter database close normal...
Dump file e:\ritesh\alauki\bdump\alert_alauki.log
Mon Jan 02 10:50:49 2006
ORACLE V9.2.0.1.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 2, CPU type 586
Mon Jan 02 10:50:49 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Mon Jan 02 10:51:24 2006
Starting up ORACLE RDBMS Version: 9.2.0.1.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 50331648
large_pool_size = 8388608
java_pool_size = 33554432
control_files = E:\RITESH\DATA\CONTROL01.CTL, E:\RITESH\MIRROR\CONTROL01.CTL
db_block_size = 8192
db_cache_size = 25165824
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = ALAUKI
dispatchers = (PROTOCOL=TCP) (SERVICE=ALAUKIXDB)
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = E:\RITESH\ALAUKI\bdump
user_dump_dest = E:\RITESH\ALAUKI\udump
core_dump_dest = E:\RITESH\ALAUKI\cdump
sort_area_size = 524288
db_name = ALAUKI
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Mon Jan 02 10:51:34 2006
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jan 02 10:51:45 2006
alter database mount exclusive
Mon Jan 02 10:51:45 2006
ORA-00202: controlfile: 'E:\RITESH\DATA\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jan 02 10:51:48 2006
ORA-205 signalled during: alter database mount exclusive...
Shutting down instance (abort)
License high water mark = 3
Instance terminated by USER, pid = 604
can u pls give me a solution of error
Thanks in advance
Ritesh Patel
Message was edited by:
RITESH

this is my alert log file
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jan 02 14:21:01 2006
CREATE DATABASE ALAUKI
     USER SYS IDENTIFIED BY *     USER SYSTEM IDENTIFIED BY *     LOGFILE GROUP 1 ('E:\RITESH\DATA\REDO01.LOG') SIZE 100M,
          GROUP 2 ('E:\RITESH\DATA\REDO02.LOG') SIZE 100M,
          GROUP 3 ('E:\RITESH\DATA\REDO03.LOG') SIZE 100M
     MAXLOGFILES 5
     MAXLOGMEMBERS 5
     MAXLOGHISTORY 1
     MAXINSTANCES 1
     CHARACTER SET US7ASCII
     NATIONAL CHARACTER SET AL16UTF16
     DATAFILE 'E:\RITESH\DATA\SYSTEM01.DBF' SIZE 325M REUSE
     EXTENT MANAGEMENT LOCAL
     DEFAULT TEMPORARY TABLESPACE TEMPTS1
          TEMPFILE 'E:\RITESH\DATA\TEMP01.DBF' SIZE 20M REUSE
     UNDO TABLESPACE UNDOTBS1
          DATAFILE 'E:\RITESH\DATA\UNDOTBS01.DBF' SIZE 200M REUSE
          AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Jan 02 14:21:02 2006
Database mounted in Exclusive Mode.
Mon Jan 02 14:21:36 2006
Successful mount of redo thread 1, with mount id 2260372877.
Assigning activation ID 2260372877 (0x86ba8d8d)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: E:\RITESH\DATA\REDO01.LOG
Successful open of redo thread 1.
Mon Jan 02 14:21:36 2006
SMON: enabling cache recovery
Mon Jan 02 14:21:36 2006
create tablespace SYSTEM datafile 'E:\RITESH\DATA\SYSTEM01.DBF' SIZE 325M REUSE
EXTENT MANAGEMENT LOCAL online
Mon Jan 02 14:22:11 2006
Completed: create tablespace SYSTEM datafile 'E:\RITESH\DATA
Mon Jan 02 14:22:11 2006
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
Mon Jan 02 14:22:16 2006
CREATE UNDO TABLESPACE UNDOTBS1 DATAFILE 'E:\RITESH\DATA\UNDOTBS01.DBF' SIZE 200M REUSE
          AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Jan 02 14:22:38 2006
Created Undo Segment _SYSSMU1$
Created Undo Segment _SYSSMU2$
Created Undo Segment _SYSSMU3$
Created Undo Segment _SYSSMU4$
Created Undo Segment _SYSSMU5$
Created Undo Segment _SYSSMU6$
Created Undo Segment _SYSSMU7$
Created Undo Segment _SYSSMU8$
Created Undo Segment _SYSSMU9$
Created Undo Segment _SYSSMU10$
Undo Segment 1 Onlined
Undo Segment 2 Onlined
Undo Segment 3 Onlined
Undo Segment 4 Onlined
Undo Segment 5 Onlined
Undo Segment 6 Onlined
Undo Segment 7 Onlined
Undo Segment 8 Onlined
Undo Segment 9 Onlined
Undo Segment 10 Onlined
Successfully onlined Undo Tablespace 1.
Completed: CREATE UNDO TABLESPACE UNDOTBS1 DATAFILE 'E:\RITE
Mon Jan 02 14:22:39 2006
CREATE TEMPORARY TABLESPACE TEMPTS1 TEMPFILE 'E:\RITESH\DATA\TEMP01.DBF' SIZE 20M REUSE
Completed: CREATE TEMPORARY TABLESPACE TEMPTS1 TEMPFILE 'E:\
Mon Jan 02 14:22:40 2006
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMPTS1
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMPTS
Mon Jan 02 14:22:41 2006
SMON: enabling tx recovery
Mon Jan 02 14:22:44 2006
Errors in file e:\ritesh\alauki\udump\rits_ora_804.trc:
ORA-01501: CREATE DATABASE failed
ORA-01991: invalid password file 'D:\oracle\ora90\DATABASE\PWDrits.ORA'
Mon Jan 02 14:22:44 2006
Error 1991 happened during db open, shutting down database
USER: terminating instance due to error 1991
Instance terminated by USER, pid = 804
ORA-1092 signalled during: CREATE DATABASE ALAUKI
     USER SYS IDENTIFIED BY *     U...

Error - when creating a standby database with EM 10g Grid Control

Similar Messages

Maybe you are looking for