Error when creating a transport request

I have developed a process with GP and now I want to export it by creating a transport request. When I choose my process in the gallery, I get the following messages:
Process "House Connection Request" refers to deprecated version of Callable Object "CO_InputRequest"; deprecated versions cannot be exported
Process "House Connection Request" refers to deprecated version of Action "Input House Connection Request"; deprecated versions cannot be exported
Both the action and its CO exist, but I don't understand why they are deprecated as they are activated and working.
So I deleted them from the process and created them new, but I still get the same error message from above.
Any help is greatly appreciated.
Regards,
Aydin

Hi Experts,
we are currently facing the same issue, that some Guided Procedures processes can not be added to transports, always throwing the same error messages:
Process "xxx" refers to depricated version of Callable Object "zzz"; deprecated versions cannot be exported
Can someone tell us if this is a technical issue or has object xxx been created/modified in the wrong way?
Any help is greatly appreciated.
Thank you very much.
Kind regards,
Jan

Similar Messages

Error when importing a Transport request in CHARM???

Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
Anand

HI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand

Problem when creating a transport request

Hello
I copied productive BR3 to test BR1 system(it is a BW3.5 system). Test BR1 existed also before(only the main client was 003).
Now main client is on both 001(I do not know if this matter). I replicated with transport controller and everything went fine.
When I want to create a transport request I have problem "Extended transport contrl is not active . Cannot specify target client". when I wannt further explanation I get:
"Extended transport control is not active: Cannot specify target client
Msg.nr.TR067
Diagnosis
Extended transport control is not active. This means that you can only release transport requests for the following transport targets:
Target group
R/3 System without specifying a client
Procedure
Change the transport target of the request by removing the client (for example, "C11" instead of "C11.010").
The simplest way of doing this is to use F4."
When I use F4 for "Target" field I get "BR3.001" as only option. If I choose BR3.001 I get above message. If I use "BR3" I get "BR3 is not a consolidation target". For further explanation I get :
"BR3 is not a consolidation target
Msg.nr TK658
Diagnosis
Transport target BW3 is not configured as a consolidation target of this SAP System. If you do not stick to configured transport routes, you may cause inconsistencies between the SAP Systems in the system landscape.
If you use extended transport control, you also need to specify a configured target client.
If the configured consolidation target is a target group, you also need to specify the target group as the transport target, if the target group consists of a single target system, or a single target client.
Procedure
Choose a configured transport target, or change the transport route configuration in the Transport Management System.
What to do?

Hi Jan,
Please check whether parameter CTC=1 has been set in Transport tool,If not set it.
Also check whether your transport group is configured properly
regards,
Jai

Error when creating a transport via a correction in charm

Hi Folks..
I am getting an error when I attempt to create a transport using a correction from a change document which is created from a service desk message. I am able to go through the entire process upto creating the transport in the satellite system. When I try I get the following error:
Action Create Transport Request in system DBW 111 of type Source Systems has been cancelled
There is nothing in the action log or either system log. Has anyone seen this before? I can't find anything in Notes, google or here in SDN.
Thanks for your help!
Best Regards,
Bill

Hi
check log of this action in the task list (goto task list -> search error in calendar -> double klick for details)
Maybe:
-You don't have a user in the development system
-You have created a task for a non existing user
-RFC user of TMW RFC has not enough authorization in the dev system to create transports (trace authorizations while creating transport)
best regards
Andy

Error when creating a travel request with Advance amount

Hi Gurus,
When I create a travel request with an Advance amount and try to save the same, the system throws up an error msg : "Trip country does not exist in the system (T005).
However, it allows me to create the travel request without this error if i dont enter any advance amount in the travel request.
I checked the tables V_T706L and V_T706O and found my trip county to be existing.
Regards
Prakash

Hello Prakash,
The following are the prerequisites for transferring trip costs to accounting. In other words when you try to create and save a travel request with advance you are involving accounting entries and therefore the following needed to be checked:
1.Travel Management and Accounting are both at Release 4.5A. If at least one of the systems
has a release level lower than 4.5A, follow the instructions in Customizing for ALE.
2. For payment to be effected, vendor accounts must exist in Accounting for the respective
personnel numbers.
3. The following Accounting tables must be replicated in the Travel Management System using
Customizing transports:
Company Codes (T001)
Countries (T005)
Input Tax Codes (T007A, T007S)
Document Types (T003)
4. The transfer of settlement results
More relevant in your case would be the point 3. Countries(T005) not defined in TM.
Hope the above provided you more information.
Rgds
CONMJI

Error when creating a leave request

Hi Experts,
I am setting up ESS (WDA) EHP5 on Portal 7.3. I and ERP6. I got this error when clicking on the calender to create a leave request:
No data for infotype 0001, personnel no. 00000000 in period 2012-01-24 - 2012-01-24. (Modifiers not found)
Got the same error on the portal as well as using PTARQ
I did customizing for Leave Request and there are also data for IT0001.
Is there anything else missing?
Please advise.
Thanks.

SInce you are getting a message recarding pernr 00000000, it looks like your user in portal may not be tied to an employee via infotype 0105?
/Kirsten

Access is denied.. Error when creating Internet service request

Hi all,
I have created an internet service request for the employee to create his bank details ( which have to be routed to HR administrator ).
I have created a scenario named ZBD and assigned by self as the processr and created an ITS service by the name Zbank.
i log on to its for the service QISR. I Select my custom scenario, but when i select my custom scenario it gives me a java script error "access denied".
When i try ot execute the transaction QISR from webgui i get the error
"access is denied" and also another message saying "Enter the address of your ITS Web server"
I found a couple of mesasges but none helped me get over this issue
please help

resolved

Error when creating transport request in 000 clinet

Hi All,
I am getting the below message when creating a transport request manually in 000 client
Requests can only be created from ChaRM!
Message no. 38001
How can I deactivate charm for short time and then activate it again?
Please let me know your suggestion.
Thanks
Amair

Hi Sanjai,
Thanks for the quick response.
But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
Thanks again
Amair

Error when creating transport request in Charm for Portal

Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
David

Hello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark

Error when creating transport request for transfer rules

Hi
When we are creating the transport request it is giving the Warning 1."source system are not transported.
     Error 2." you can't use request BQAK900164
     Error 3."object ISTS Zevkkn_bb could not be saved
               to order BQAK900164.
This is very urgent.
Please reply soon.
Thanks in Advance,
Regards
Pankaj Angra

Hi,
Did you replicate the data source?. That could be the problem or there might be problem you have set up the source system on your BW system
make sure that the source system names are mapped from your R/3 dev to your R/3 QA. This is done on the BW QA (target system) RSA1 => Tools => mapping of source system names. make sure your entries are there for the logical system names of your dev to qa.
Then in the BW dev, when selecting the trasnfer rule make sure to select the appropriate source system. (souce system icon in tool bar)
Do u hav 2 Source sys ?
-Shreya

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Error when creating Travel request

Hi all,
    I am encountering error "Percentage is too high" when creating a travel request. When i tried to change the cost centre to split into different entries.
Ex: 1) 10 %   cost centre1
      2) 40%    cost centre2
      3) 50%    cost centre2
when i try to save the request i encountered error with "Percentage 90% is too high" as the first entry is reverting back to the initial entry before modification(initial entry is 100% with cost centre1) it is reverting back the first entry as 1) 100 %   cost centre1 that means now the entries are becoming
Ex: 1) 100 %   cost centre1
      2) 40%    cost centre2
      3) 50%    cost centre2
   altogether 190% so throwing an error with "Percentage 90% is too high" as the total percentage is more than 100%.
Can you please help in resolving this issue.

hi,
see this link
Percentage Overhead Rates are not capture with Transport request
refer this link to know how to create travel reaquest
http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51f0e994b85e40e10000000a11466f/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/b6/cdaab649e911d189060000e8322f96/frameset.htm
thanks

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Error in transporting ODS(Error when creating the export DataSource.......)

Hi All,
 When I try to transport ODS from dev to quality i m getting the following error.
DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object XADDR1

 XADDR1 is my ODS. BQ1CLNT355 is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
Please Suggest solution,if any body encountered same problem. It is very urgent for me.
Regards,
Ramana.

Hi
You generate export datasource once again
Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
Hope this helps
Reg
N Ganesh
assign points if useful***

Error when creating master group

I am trying to set up a replication environment with only one master site. I do
it by running SQL script using SQLPlus (rather than using the Wizard). The
following is the script I used to create the master site:
create user REPADMIN identified by REPADMIN;
BEGIN
DBMS_REPCAT_ADMIN.GRANT_ADMIN_ANY_REPGROUP(
userid => 'REPADMIN');
END;
grant comment any table to REPADMIN;
grant lock any table to REPADMIN;
grant execute any procedure to REPADMIN;
All lines completed successfully. Then I connect as "repadmin" and try to
create a master group. The following is the screen capture when I ran the
SQLPlus:
Connected to:
Oracle7 Server Release 7.3.4.4.1 - Production
With the distributed, replication and parallel query options
PL/SQL Release 2.3.4.4.1 - Production
SQL> BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => 'REPGRP01',
qualifier => '',
group_comment => '');
END;
2 3 4 5 6 7 BEGIN
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 2121
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 420
ORA-06512: at "SYS.DBMS_REPCAT", line 45
ORA-06512: at line 2
I have no idea on the error message and even don't how to trace the error.
Is there anything I missed when creating the replication administrator
'repadmin'? Or anything I have to set up as well before I can create a master
group?
p.s.
1) The version of the Database is 7.3.4.4.1
2) I did try to create a master group using the Wizard in DBA studio, but
same error messages appeared.
Thanks in advance.
Kae

Hi,
Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
For example: You can creates new purchasing groups with USER ID and telephone numbers
Purchasing groups-------------USER ID ---------------Telephone numbers
Z01-----------------------------------USR01------------------232569875
Z02-----------------------------------USR02------------------232589876
Regards,
Biju K

Error when creating a transport request

Similar Messages

Maybe you are looking for