Error when creating database

when installing 9i server i couldn't create database and after installation i tried to create database using DBCA but same errors occured.
it says null sid name error=2. and then says tns protocol problem.
what should i do?

Kim Gabrielsen (guest) wrote:
: Hi,
: I have tried to install O8 on Linux several times but all have
: failed. I follow the doc written by Tom Bissett which I find
very
: informative on this subject.
: I have the correct env setting, have created oracle user as
: member of the dba group and the install program runs nicely
until
: it starts to create the database. It stops with an error
message.
: The log files look like this (excerpts):
: CRDBORCL.LST
: ORA-06413: Connection not open.
: LCC-00161: Message 161 not found; product=SVRMGR; facility=MGR
: ORA-06413: Connection not open.
: create database "ORCL"
: ORA-03114: not connected to ORACLE
: ORA-06413: Connection not open.
: which is the same results I see if I invoke svrmgr manually
: and tries to connect as 'internal'. BTW srvmgr prompts me for a
: password even though I'm logged on as 'Oracle' which is a
member
: of DBA.
: INSTALL.LOG
: - Entering database actions section.
: - Creating initORCL.ora file
: - Creating crdb2ORCL.sql database catalog and file
creation
: script
: - ERROR: The 'CREATE DATABASE' statement for the ORCL
: database failed.
: egrep failed to find 'ORA-' error in the file:
: /u01/app/oracle/admin/ORCL/create/crdbORCL.lst
: I hope someone can help 'cause I'm stock here...
: Best regards
: Kim Gabrielsen
If you followed the instructions on setting the shared memory
parameters you may have a problem.
In the 'shmparam.h' file set SHMMAX to something smaller than 4G.
I just set mine to 2G or 0x7FFFFFFF and now it works fine.
I have done the Oracle 8.0.5 installation twice now on 2
different machines with success(1 Compaq Proliant 1500 -
RH5.2/2.0.36 kernel and 1 GW2K - RH5.2/2.2.1 kernel) I ran into
several problems along the way but all problems were solvable.
Mark
null

Similar Messages

Syntax error when creating database

Not sure if this is the correct forum, but here goes..
Using a sample at:
Technet Link
I get a "Syntax error near GO" when I try to execute the following SQL Command.
USE master
GO
CREATE DATABASE testdb
ON
( NAME = testdb,
FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\testdb.mdf' )
GO
I am using a function to create this database. It is a temporary database that gets recreated or altered frequently.
The code checks for SQL Server, gets it's version number in order to use the default SQL Server path. If SQL Server isn't available, ACE / OLEDB is used to create and manage the database (this part works fine).
The code used to check for and create the database follows.
private Boolean CheckForSQLServer()
SqlConnection cnx = null;
Int32 dbExists = 1;
SqlCommand sql;
String SSData = String.Empty;
// Check for SQL Server. If it exists, use it.
String login = UserPrincipal.Current.UserPrincipalName;
login = login.Substring(0, login.IndexOf("@"));
try {
cnx = new SqlConnection(
String.Format("server={0};user={1};Trusted_Connection=Yes;", Prop.SQLConnection, login));
cnx.Open();
hasSQLServer = true;
} catch (Exception) {
hasSQLServer = false;
return true;
if (hasSQLServer) {
try {
String ServerVersion = cnx.ServerVersion;
String SSPath = String.Format(@"C:\Program Files\Microsoft SQL Server\MSSQL{0}.MSSQLSERVER\MSSQL\DATA\",
ServerVersion.Substring(0, ServerVersion.IndexOf('.')));
SSData = String.Format(
"USE master\nGO\nCREATE DATABASE {0}\nON\n( NAME = '{1}',\nFILENAME = '{2}{1}.mdf' )\nGO",
Prop.SQLDBName, Prop.SQLDBName, SSPath);
String s = String.Format(
"SELECT COUNT(*) FROM (SELECT DB_ID('{0}') AS DbID) t WHERE DbID IS NOT NULL", Prop.SQLDBName);
sql = new SqlCommand(s, cnx);
SqlDataReader sr = sql.ExecuteReader();
if (sr.Read())
dbExists = (Int32)sr[0];
sr.Close();
} catch (Exception) { }
if (dbExists == 0) {
try {
sql = new SqlCommand(SSData, cnx);
sql.ExecuteNonQuery();
} catch (Exception) { }
} else {
try {
sql = new SqlCommand(String.Format("drop database {0};", Prop.SQLDBName), cnx);
sql.ExecuteNonQuery();
sql = new SqlCommand(SSData, cnx);
sql.ExecuteNonQuery();
} catch (Exception) { }
cnx.Close();
return false;
Comparing the generated SQL string to sample E at the link above shows them to be identical except for the database name and file pathname, but the paths do exist although the files do not.
The SQL Exception occurs at the first
sql = new SqlCommand(SSData, cnx);
statement in the code. I would think this can be done as a single string even though a .sql file is referenced in the article.
Andy

Works correctly in SQL Server 2014 Management Studio:
USE master
GO
CREATE DATABASE testdb
ON
( NAME = testdb,
FILENAME = 'F:\temp\testdb.mdf' )
GO
DROP DATABASE testdb
GO
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

JDeveloper shows a fatal error when create Database or UML Diagrams

My Platform is Windows 7 x64 with JDeveloper 11.1.2.3
JDeveloper shows an error when I do this:
1) Create a new Database Diagram.
2) Create a Table in this Database Diagram.
3) Delete the Database Diagram.
4) Try to create a new Database Diagram again.
5) JDeveloper shows a Fatal Error, and the ADF Model Project still to be corrupt after restart JDeveloper.
The same happens with UML diagrams.
Do you know any solution for that?
Best Regards,

I found the reason of this error.
This error happens, if you store your ADF Application Project in a Network Drive, if you store your projects in local drives all works fine.
Regards,

Error when creating database after oracle 8.1.6 is installed.

Hi,
I used Redhat 6.1 and installed Oracle 8.1.6. I think the oracle software is installed successfully. However, when I attempted to create the database by Database Configuration Assistant, I got an error message when I click on 'start' button.
The message is ORA-01031: insufficient privileges and ORA-01012: not logged.
How can I solve the problem to create my first database?
Thanks a lot.
Regards,
Tony

Make sure svrmgrl still works.
To startup a database, you must login as oracle, and oracle must also be a member of the dba group.
Also, make sure you set the following environment variables: $ORACLE_HOME, $ORACLE_SID.
Good Luck!
null

Error when creating database instance

Hi,
When trying to install R3 4.7, I came to a error while system creating tablespaces. The log is as follows.
TRACE      [iaxxcwalker.cpp:296]
           CDomWalker::processStep()
Executing installation step SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseServer|ind|ind|ora|ind|ind|0|DatabaseServerOra|ind|ind|ora|ind|ind|0|TablespacesAndRollbacksegments|ind|ind|ora|ind|ind|0|DatabaseTablespaces|ind|ind|ora|ind|ind|0|OraDatabaseTablespaces2|ind|ind|ind|ind|ind|0|checkFreeDiskSpace
TRACE      [iaxxgenimp.cpp:775]
           showDialog()
waiting for an answer from gui
Is it a problem of disk space? I have 90G.I think it is enough for 470. How should I proceed?
Thanks and regards,
Larry

Hi Beck,
Thanks for your reply. I have solved this issue myself. But I come into another issue that during R/3 database reload, system terminate with a message "File SAPSSEXC.012 is missing."
It is very strange cause I only have SAPSSEXC.011 in my folder /51030584_4/EXPORT4/DATA/. Do you have this file?
Thanks and regards,
Larry

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem when creating Database:

There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database (Database, OS and hardware Configuraiton)

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODE

It is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.

Demo Error when creating or changing configuration objects

Hi All,
I am trying to "Generate the Configuration Objects" for Demo: CheckFlightAvailability.
But in the GenerationLog I got the error under "Generation Statistic" saying that "Error when creating or changing configuration objects".
I can any one tell me what went wrong?
Regards,
Nagarjuna.

Did you ever solve this issue? We are experiencing the same errors, but with ZCM 11. Server configurstion is Windows Server 2008R2, database is MS SQL 2005.
Every time we try to create or change a (Windows) bundle or policy there's an error message in ZCC. The error is:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.exception.ConstraintViolationExcepti on: could not insert collection: [com.novell.zenworks.datamodel.objects.assignableco ntent.AssignableContentObject.ContentServers
...followed by a different GUID(?) every time.
We've placed a SR but haven't had any suggestions from Novell yet - we're soon going from calm to panic as we are planning to move from test to production in two weeks...
Cheers,
Peter

Insatallation error at create database statistics..

Hi all,
I am trying to install ecc6 abap+java on win 2003 sp2 and oracle 10.1
I got error at create database statistics..When i checked in brconnect.lon it says that "BR0484I BRCONNECT log file: O:\oracle\NAG\sapcheck\cebiwbzb.sta
BR0613E Database instance NAG is shut down"
But when i cross check the oracle it is working fine ..up and running..
i checked it by executing "SQL>select name,open_mode from v$database;"
out put SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ORCL READ WRITE
SQL>
I restarted the server,but stil gettng the same error...
Three days back i installed using the same dump installation was perfect without a single error.(( used oracle 10.1 without the patch )
Please help to sort out this error.Please suggest the logs that needs to checked in case of installation failure.
Thanks,
Kasperr.

Hi All,
what you are pointing is right i gave wrong sid henct the error.
How evre i am facing some diffent error,this one i am facing error at same "create database statistics' it says that particulr sid is shut down.
when tried for sqlplus "/as sysdba"----
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
Than i loged off administrator and loged in as sidadm and started up oracle it was up and runing...than i loged of and loged in as administrator ans continued the installation and it runing....
Now when i try to check the status by sqlplus "/as sysdba" it gives the same response
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
Please help how to correlate this thimg administratot and sid adm..do i need to do some modification like add sid adm to adminstrator... please let me know how this is done,,...
when i checked the task manager the oracle.exe is runing under SYSTEM user......
Thanks,
Kasperr.

Error when creating index with parallel option on very large table

I am getting a
"7:15:52 AM ORA-00600: internal error code, arguments: [kxfqupp_bad_cvl], [7940], [6], [0], [], [], [], []"
error when creating an index with parallel option. Which is strange because this has not been a problem until now. We just hit 60 million rows in a 45 column table, and I wonder if we've hit a bug.
Version 10.2.0.4
O/S Linux
As a test I removed the parallel option and several of the indexes were created with no problem, but many still threw the same error... Strange. Do I need a patch update of some kind?

This is most certainly a bug.
From metalink it looks like bug 4695511 - fixed in 10.2.0.4.1

Error when creating database

Similar Messages

Maybe you are looking for