Error when creating deliveries using VL10B

I have created a STO using ME27 and when i try to create an outbound delivery using VL10B i receive an error message "Only 0 PAA of material XXXXXX available". I have 0 PAA in storage location no. 0001 and 1900 PAA in storage location no. 0002.
Can anybody help me to solve this problem? Thank you in advance.
Ioan

Hi Loan,
In your stock transfer Purchase Order has the correct 'Shipping Point' been determined for this item - i.e. the 'Shipping Point' associated with your 0002 Storage Location?
The 'Shipping Point' determination is setup in config in <OVL2>, you can use the 'Loading Group' field in the Material Master (Sales:General Plant) tab to influence the shipping point that is automatically determined for a Material.
Assuming the Shipping Point has been determined correctly for your 0002 SLoc - then in <VL10B> you will have selected this 'Shipping Point' for your delivery creation. I also noticed that in <VL10B> on the Material tab you have the option to specify a SLoc (I'm assuming this is a source SLoc since the help doesn't clearly specify) - try entering this data too and see if you can generate your delivery.
Good luck,
Ravelle

Similar Messages

Error when creating Recordset using CF and Postgres

I'm a complete newbie when it comes to databases and development so go easy on me.
I have created a simple database with a schema (ABC) and 2 tables (_Address, _Member) in Postgres 9.0. I have installed CF 9 in development and am creating a new application using the Construction Kit Vol 1 as my guide. I got to the point where I am to make a Recordset and keep getting an error of:
-1:ERROR: schema "ABC" does not exist
org.postgresql.util.PSQLException: ERROR: schema "ABC" does not exist
...about 20+ lines of at errors follow (can post a screenshot if they would be helpfull)...
From the Database tab I am able to browse my database just fine but I cannot create this recordset in the bindings tab. I also followed the examples in the book and using their database I am able to create a recordset just fine. CF says my data source verifies correctly. I have verified that my password is correct as well as when in the database tab of DW I can test the connection fine. I cannot edit the connecton from there but I get the same error when I try to edit on all of the databases, including the default test databases.
Any suggestions would be greatly appreciated.

Hi Loan,
In your stock transfer Purchase Order has the correct 'Shipping Point' been determined for this item - i.e. the 'Shipping Point' associated with your 0002 Storage Location?
The 'Shipping Point' determination is setup in config in <OVL2>, you can use the 'Loading Group' field in the Material Master (Sales:General Plant) tab to influence the shipping point that is automatically determined for a Material.
Assuming the Shipping Point has been determined correctly for your 0002 SLoc - then in <VL10B> you will have selected this 'Shipping Point' for your delivery creation. I also noticed that in <VL10B> on the Material tab you have the option to specify a SLoc (I'm assuming this is a source SLoc since the help doesn't clearly specify) - try entering this data too and see if you can generate your delivery.
Good luck,
Ravelle

Odbcad32.exe errors when creating DSN using 9i client and 9.02.00.65

Hi,
I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installing different ODBC drivers - from 9.018 - through 9.2.065 - I have been through the message that I needed a newerr version of the OUI etc etc, I finally found a thread that led me to to ODAC92070 which then I installed - geez!
ALL these configurations resulted in ODBC crashing when creating a DSN! weak! In just about every situation that I had the patience to test TOAD it worked fine - however from the command line SQLPLUS would crash too when connecting - even the MS Driver works sort of - in most situations. What in the world do I need to do to get the ODBC Administrator to not crash when creating an Oracle DSN.
Thanks
Jerry

Hi,
I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installing different ODBC drivers - from 9.018 - through 9.2.065 - I have been through the message that I needed a newerr version of the OUI etc etc, I finally found a thread that led me to to ODAC92070 which then I installed - geez!
ALL these configurations resulted in ODBC crashing when creating a DSN! weak! In just about every situation that I had the patience to test TOAD it worked fine - however from the command line SQLPLUS would crash too when connecting - even the MS Driver works sort of - in most situations. What in the world do I need to do to get the ODBC Administrator to not crash when creating an Oracle DSN.
Thanks
Jerry

Error when generating program when creating CVC using infoprovider

We are receiving the message "Error when generating program" when
creating CVC using infoprovider.
This may have something to do with the fact that we added an attribute
to the infoObject 9ALOCNO. We are getting an information message if we
run a consistency check in the POS.
We had this same issue in our development system. Here, I deactivated
and then reactivated the CVCs and this resolved the problem. However,
this is not a good solution since this is also a problem in our
production system and we do not want to deactivate the POS.
is there another option to fix this problem?
Thank you,
Rumi

Hi Rumi,
i would try these:
1. Make sure the cube is active and every thing ok there
2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details.

Error when creating delivery referenced by STO doc. from vl10b

Hi All,
We are getting an error when creating delivery as background from vl10b t-code referenced by STO. The error message " Global official numbering: Input parameter incomplete " .
Please give me a hand for this problem.
Thanks in advance for your helps.
Regards,

Hi,
One of the possibilities of the error could be
if i_BuKrs eq space or i_BuPla eq space or i_PostDate eq space.
i.e Compnay code or Posting date ro Business Place is Blank.
Please Take help of ABAPEr to resolve the isssue
Thanks
Murtuza

Error when creating a folder ,iviews in the portal

Dear sap gurus ,
I m facing a error when creating a Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
Exception id: 10:50_23/11/07_0005_16892850
See the details for the exception ID in the log file
Thanks and Regards,
sathya

Hi Sathya
The following line in your log tells you what is wrong:
ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
Br
Göran

Error when creating a FDM application on SQL Server 2005

Hi,
we are getting this error when creating a FDM application on SQL Server 2005
Error: EPMCSS-07003: Failed to validate identity. Invalid identity . Check identity.[SET_ROLES_LIST]
We are using Windows System Integration although we have also tested with sa user.
Any ideas?
Thanks

Based on the error message it appears to be having a Shared Services issue. Verify that the "ADMIN" account is being used for the HSS connection and that you are using "ADMIN" to create the application and see if the same error is returned.

Error when Creating a ServiceClientFactory instance JAVA API

When invoking Assembling a PDF document quick start I'm having a compilation error when creating a ServiceClientFactory instance:
//Create a ServiceClientFactory instance
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
The error is: The type com.adobe.idp.Context cannot be resolved. It is indirectly referenced from required .class files
All the required jars are a path.
What esle can be a problem ?
Thanks, Yan

Since you are using SOAP, you need to have the AXIS jars available. They are in the LiveCycle_ES_SDK\client-libs\thirdparty directory:
activation.jar (required for SOAP mode)
axis.jar (required for SOAP mode)
commons-codec-1.3.jar (required for SOAP mode)
commons-collections-3.1.jar (required for SOAP mode)
commons-discovery.jar (required for SOAP mode)
commons-logging.jar (required for SOAP mode)
dom3-xml-apis-2.5.0.jar (required for SOAP mode)
jaxen-1.1-beta-9.jar (required for SOAP mode)
jaxrpc.jar (required for SOAP mode)
log4j.jar (required for SOAP mode)
mail.jar (required for SOAP mode)
saaj.jar (required for SOAP mode)
wsdl4j.jar (required for SOAP mode)
xalan.jar (required for SOAP mode)
xbean.jar (required for SOAP mode)
xercesImpl.jar (required for SOAP mode)

Procurement Coordinator received Authorization Error when creating Bid Inv

Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity Managers

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Publish to portal error when creating a iview

hi gurus,
I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
Error:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
Regards

yes i have used that tool,,,i am getting below error.
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
RED
The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
I have checked everything,,but still geting red lights
Regards

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Got Error when creating application server connection

Hi Guys...I am using SOA 10.1.3.1.0
I got the following error when creating application server connection
In Step 1:
I selected the Connection type as Standalone OC4J 10.1.3 (Why because I use this one)
In Step 2:
In this step I gave username and password (same username and password to connect to BPEL console)to authenticate connection
In step 3:
It is asking for Hostname, RMI port and URL path. My computer name is gopal-computer. I gave this hostname. RMI port number is 23791 by default. I kept this one as it is and URL path optional I think. I did not give any thing.
In step 4:
When I hit the test connection button its giving the following error
Error while getting remote MBeanServer for url: ormi://gopal-computer:23791/default:
Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
Please help me.
Thanks,
Gopal.....

For SOA Suite connection you should choose "Oracle application server 10g 10.1.3"

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Error in transporting ODS(Error when creating the export DataSource.......)

Hi All,
 When I try to transport ODS from dev to quality i m getting the following error.
DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object XADDR1

 XADDR1 is my ODS. BQ1CLNT355 is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
Please Suggest solution,if any body encountered same problem. It is very urgent for me.
Regards,
Ramana.

Hi
You generate export datasource once again
Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
Hope this helps
Reg
N Ganesh
assign points if useful***

ESS Payslip : Error when creating form

Hello All,
I get the following error when i click on
ESS - Pay Information - Payslip - Payslip Inquiry Service.
Please help !
Full Stack Trace
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
     at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Please check the user language setting in SU01. If no language is defined, the portal will use the browser to set the portal language. The payslip language is defined in feature HRFOR and must match the employee's molga. If the language defined for the employee's payslip is different from the user's, a dump will occur. Try changing the user's language setting.
Best regards,
Antonio

Error when creating deliveries using VL10B

Similar Messages

Maybe you are looking for