Error When Creating Entities From Loader Connection In Oracle Data Quality

I want to create a Loader Connection to an external data source.
I Logged on the Metabase Manager and created a new loader connection with type as 'Oracle'.
In the parameters it asked for a TNS Name.I gave the TNS of the external data source to which i want to connect from 'tnsnames.ora' file.
After that I logged on to ODQ and tried creating an Entity using create entity wizard but ODQ cannot connect to the data source using the above created Loader Connection.
It shows below failure message:
Authentication failed. couldn't load library "C:/OraHome_1/oracledq/metabase_server/lib/pkgOracleAdapter/pkgOracleAdapter.dll": could not find specified procedure
I had my ODQ metabase and ODQ GUI running on Windows.
Hope i am clear.if i am making mistake in above steps please let me know.
Waiting for reply.

Refer to SR 2-5703204

Similar Messages

  • Error when creating a new JMS connection factory in GlassFish V3 b57

    When I use the admin console and try to create a new JMS connection factory in GlassFish V3 b57, the operation fails with the error message
    An error has occurred: Can't find ConfigModel.Property for attr -connection-validation-required on interface com.sun.enterprise.config.serverbeans.ConnectorConnectionPool
    Should I better report this in the GlassFish news forum (http://forums.java.net/jive/forum.jspa?forumID=56&start=0)?
    p.s. I launch the admin console from within NetBeans 6.7.1 (the server started before the IDE). WIth version b 56, creating a JMS connection factory worked fine.
    Best regards,
    Michael Justin

    This bug does not apear in the nightly build (b58) now so everything looks fine again.
    Greetings,
    Michael

  • Error when creating transport from Satalite system

    Hi all i am getting the following error when i try and create a transport from a satalite system.
    The RFC connection to the Solution Manager system is not maintained
    Message no. STMWFLOW010
    Diagnosis
    No RFC connection to the central lock information management system.
    The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
    System Response
    Action cancelled.
    Procedure
    Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality.
    I have checked the RFC to Solman and that is working fine. How can I deactivate the project lock functionality?
    Points will be awarded
    Thanks
    Santosh

    Hi.
    Please have a look at [this|http://help.sap.com/saphelp_sm40/helpdata/EN/43/7227481a856fcae10000000a1553f6/frameset.htm]
    Hope it helps.
    /cheers

  • Error when creating project from template

    I'm getting an error when i try to create a project from template. It's the same error no matter which template i select.
    WebIDE: 1.9.3.1
    Is there a new setting i missed or...?

    Henrik Damhøj Andersen
    Problem has been resolved. Please check again.
    Regards,
    JK

  • Error when creating BPF from Admin. Console

    Dear experts!!
    We have an error when trying to create a BPF on Admin Console. On the last step of the process (click Save), we see the next error:
    System.Exception: A runtime error has occurred at server
    - La conversión del tipo de datos char a datetime produjo un valor datetime fuera de intervalo.
    Se terminó la instrucción.    at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)    at OSoft.Consumers.Admin.AdminBPFClient50.ManageDataSet.ManageBPF(DataSet& dsSaveData)    at OSoft.Consumers.Admin.AdminBPFClient50.Main.SaveData()
    Any suggestions??
    Thanks and best regards!
    Cecilia

    There is no problem using Spanish on the BPC client side.  It's only a limitation that the server must be English-US.
    Double-check the server's regional & language options in the Windows control panel, as this controls how dates are formatted. The regional options must be set to English - United States.
    I've seen errors similar to this, even with English OS but when the regional settings were set to EN-UK or Danish or French, etc. This controls how the dates are formatted. BPC is very fussy about this, and requires EN-US.
    If it's not set to EN-US, you'll need to set it back to that value, and then (unfortunately) the only fix I know is to uninstall and then completely reinstall the BPC server. I don't believe it's necessary to un/re-install SQL Server, however.

  • Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

    Hello, Experts,
    I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
    An error message is "Error while communicating with the server. Framework message: Authorization failed."
    Here are the steps that were implemented and how this issue was reproduced:
    SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
    Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
    EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
    BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
    EPM connection was successfully created in SAP BusinessObjects CMC.
    EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
    From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
    Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
    In EPM Add-in we have pressed Logon.
    In connection window selected SAP BusinessObjects Enterprise connection type.
    An error "Error while communicating with the server. Framework message: Authorization failed." appears.
    Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
    Looking forward you valuable comments and suggestions.
    Thank you in advance.
    Donatas Budrys

    Dear, Roberto,
    Our user has Full Access to all BPC tasks and it is administrator in BI system.
    Also we can successfully connect with the same user using Connection type "Local".
    We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
    ==============[System Error Tracing]==============
    [System  Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name]    : ValidateUser [DateTime]    : 04/23/2014 10:58:06 [UserId]      : [Exception]    DetailMsg  : {System.Exception: Invalid user    at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing  End ]==============
    It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
    Looking forward your feedback.
    Thank you in advance.
    Best regards,
    Donatas

  • Unusual error when creating PDF from Excel

    2 of my work computers started suffering from this 1 week ago in Excel 2003.
    All create buttons and dropdown menus work, the creation process goes through progress bars and such.
    At the end, an error box titled Acrobat PDFMaker displays this error;
    "An error occurred while saving the file. Please check if there is sufficient space in the temporary folder."
    It's Acrobat 8 and its been updated to the highest level for quite a while. No settings have been changed.
    Running on Windows XP Pro. PDF creation has worked fine before this.
    It still works fine on Word.
    The error is not on Google or here, so I assume I'm the first to ever get it!
    There's at least 40 GB free on the drives. I cleared the system temp folder for kicks, but no change.
    I did a generic uninstall and reinstall on one computer, reapplied updates, but error still pops up.

    Hello - this did not happen when I printed the file to the Adobe PDF printer.  It correctly sized the sheet as 8.5" x 11".  Thanks for the suggestion.  Also, it will properly print out to the physical printer. 
    The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online.  I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. 

  • Error when creating record from portal into MDM using MDM API's

    Hi All,
    When trying to create a new record from Portal we are getting the below error. It is working fine till yesterday.
    We are using MDM API's from webdynpro java for creating.
    What could be the reason for this. Not sure whether this error is ocuring for all the users or for single user.
    "Exception: CommandException com.sap.mdm.commands.CommandException: com.sap.mdm.internal.protocol.manual.ServerException: Database command execution error. A SQL statement failed to execute. The actual error may have been written to a log file."
    Please help to resovle this.
    Thanks
    Satish

    Hello Satish
    Suppose your Portal was upgrated
    if it right -  search and deploy new mdm packages
    Regards
    Kanstantsin

  • Page size error when creating PDF from Excel 2013

    Hello,
    I am using Acrobat Pro XI, and am creating a PDF from Excel 2013.  I have updated Acrobat to the latest version (11.0.4).  I am using the Acrobat CreatePDF add-in inside Excel to convert a spreadsheet to PDF.  However, when I create the PDF, the page size doubles from 8.5" x 11" to 17" x 22".  I have checked the print settings inside Excel to insure that the content fits onto an 8.5" x 11" page.  I also checked the Preferences->Advanced Preferences of the Create PDF add-in and confirmed that the default page size is set to 8.5" x 11".  Does anyone know why it is creating the PDF with a 17" x 22" page size?  Also, can the page be resized back down to 8.5" x 11" within Acrobat Pro XI? 

    Hello - this did not happen when I printed the file to the Adobe PDF printer.  It correctly sized the sheet as 8.5" x 11".  Thanks for the suggestion.  Also, it will properly print out to the physical printer. 
    The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online.  I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. 

  • Error when create contract from RFx bid response

    Dear Expert,
    need your help, i have create rfx, response the rfx and accepted the rfx response. after that i want to create this response rfx to contract, but this error show up.
    Error application is coming up.
    20110425
    ABY_AZKI
    183553
    srmqas
    http://srmqas.pttimah.co.id:8032/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    OBJECTS_OBJREF_NOT_ASSIGNED
    Access via 'NULL' object reference not possible.
    Method: PST95E57RQRHC49FBLT5QTJBJT9Z of program /1BCWDY/L0FUVEBVXGIOBVYFB4KR==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/L0FUVEBVXGIOBVYFB4KR==CP
    Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
    Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
    Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    i've already report thie error message to AGS but if someone have the same experiance, could you share some information about this error?
    please help me,
    Best Regards,
    Melynessa

    Hi,
    Whay is your SP level?
    SP10 is the latest one for SRM 7.0.
    Regards,
    Masa

  • Error when create PR from IP30

    Hi All,
    I am executing IP30 transaction for creating maintanence order and got the error. " Formatting error in the field EBAN-AFNAM; see next message". The maintanence plan has PM02 control key (External operation) and the system try to create a PR and failed. In PR field selection Requisitioner is mandatory field system couldn't find the one and failed.I don't want to remove the Requisitioner field as Mandatory.Is there any way we can populate some value to that field,
    Please help me how to fix this Issue.
    Regards,
    Senthil

    you can
    Make Requisitioner field as  optional by going to Field selection under SPRO -->Materials Management ..>  Purchasing ...>Purchase requisition.
    2. YOu can take help of developer to use " User I.d/ Name maintained under SU01" as requisitioner in PR creation.

  • Error when creating Delivery

    Hi experts,
         I've received an error when creating Delivery from AR Reserve Invoice :
    [Delivery - Rows - Warehouse Code][line: 0] , 'No matching records found  '' (CRD1) (ODBC -2028)'  [Message 131-183]
    Don't know what is this, but some of the transaction in Delivery from AR Reserve invoice I mean no error.
    Regards,

    HI,
    Pl. check the links of BP Master.
    Set Bill to and ship to address manually for the Business Partner and set the new address as default .
    Also check the settings of Items Default warehouse Etc.
    Hope Helpful!!!

  • I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

    I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website  Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

    Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
    Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

  • Error when creating link to documents from material

    Hi all,
    while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
    why this error message is displayed.?
    Regards,
    GaneshRaja

    Hello Ganesh
    Please check material master - view 'Bases data 2'.
    There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
    Try to do this and check out again.....
    If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
    Best Regards
    Avinash

  • Got Error when creating application server connection

    Hi Guys...I am using SOA 10.1.3.1.0
    I got the following error when creating application server connection
    In Step 1:
    I selected the Connection type as Standalone OC4J 10.1.3 (Why because I use this one)
    In Step 2:
    In this step I gave username and password (same username and password to connect to BPEL console)to authenticate connection
    In step 3:
    It is asking for Hostname, RMI port and URL path. My computer name is gopal-computer. I gave this hostname. RMI port number is 23791 by default. I kept this one as it is and URL path optional I think. I did not give any thing.
    In step 4:
    When I hit the test connection button its giving the following error
    Error while getting remote MBeanServer for url: ormi://gopal-computer:23791/default:
    Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
         javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
    Please help me.
    Thanks,
    Gopal.....

    For SOA Suite connection you should choose "Oracle application server 10g 10.1.3"

Maybe you are looking for