Error when creating R/3 source system in BW3.5

I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.

Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew.

Similar Messages

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error while Creating Flat file Source System

Hi Friends,
The message "No entry for BW_USER in table RSADMIN available" is shown when I try to create a Source System for File System(Manual Metadata, Data using File Interface). Could somebody help me please.
Thanks in advance.
Hanuma Reddy

Hi,
I have solved this problem from SDN by seeing below reply to some others question. Thanks Ajay.
I think this problem comes if you have used more than one client in BW (for example if you logged on to 000 and ran admin workbench initially after installation, and then if you prepared another client for use as BW client).
Look at OSS note 410952, it mentions of the same error. The fix as mentioned in the note is as follows
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Error when creating transport from Satalite system

Hi all i am getting the following error when i try and create a transport from a satalite system.
The RFC connection to the Solution Manager system is not maintained
Message no. STMWFLOW010
Diagnosis
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
System Response
Action cancelled.
Procedure
Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality.
I have checked the RFC to Solman and that is working fine. How can I deactivate the project lock functionality?
Points will be awarded
Thanks
Santosh

Hi.
Please have a look at [this|http://help.sap.com/saphelp_sm40/helpdata/EN/43/7227481a856fcae10000000a1553f6/frameset.htm]
Hope it helps.
/cheers

Error when trying to compound source system

I am receiving the error message R7 405 "Inconsistent Compound with char x and Ref char x" when I try to compound 0SOURSYSTEM to some of my infoobjects.
Has anyone seen this issue and been able to resolve it?
A simple scenario would be to try to compound source system with 0Division. Division has a reference char of 0DIV_HEAD. Both are collected in RSD1 via the free selection of infoobjects. 0Division is changed and both objects are selected and activated. The resulting error R7 405 is then displayed by the system. We are receiving this for multiple objects. I was able to convert Material with all its dependencies.

I get it.
This is what I did. I added source system as compounding IO to reference object, say ZDIVISION in IO editor. I saved it (it was giving me activation error). I then opened the referencing char, say ZDIV_HEAD in IO editor and added source system compounding. It was again giving me activation error, so I just saved it.
I went to RSD1, collected these two IOs and activated. I got an error because the reference IO was in a comm structure which had no source system. I deleted that infosource, and activated both the IOs again in RSD1. It activated just fine. Both IOs are active now.
By the way, the IO editor does allow you to add compounding for a referencing IO (it gives activation error though).
Not sure if this helps.

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

Error when creating transfer structure in source system

We have just had a copy of the ERP production system done and connected it to our existing QA system (done by our service providers) for a test go-live of our ERP upgrade.
Now I cannot activate the transfer rules as the transfer structure cannot be created in the source system.
I have checked the settings in table RSBASIDOC and they look okay, I can only assume that our wonderful basis people have done everything they should have but cannot be sure they've done it all correctly.
The sourcesystem is active, the RFC's are fine.
And help for a desperate man please. I've got to get this working in 1 day as basis need the system back to do an Oracle upgrade.

Hi Jonathan,
Try to replicate the DS once again and the run the program RS_TRANSTRU_ACTIVATE_ALL to activate your transfer structure. Hope it helps.
Thanks and Regards
Subray Hegde

Error when creating a transport via a correction in charm

Hi Folks..
I am getting an error when I attempt to create a transport using a correction from a change document which is created from a service desk message. I am able to go through the entire process upto creating the transport in the satellite system. When I try I get the following error:
Action Create Transport Request in system DBW 111 of type Source Systems has been cancelled
There is nothing in the action log or either system log. Has anyone seen this before? I can't find anything in Notes, google or here in SDN.
Thanks for your help!
Best Regards,
Bill

Hi
check log of this action in the task list (goto task list -> search error in calendar -> double klick for details)
Maybe:
-You don't have a user in the development system
-You have created a task for a non existing user
-RFC user of TMW RFC has not enough authorization in the dev system to create transports (trace authorizations while creating transport)
best regards
Andy

About creating a new source system on BW pointing to an Oracle database

hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.)     in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help me

HI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Tue Nov 13 10:16:48 2007                              81 0.000081
4 ETW000 [dev trc     ,00000] db_con_init called                                    29 0.000110
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             50 0.000160
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              43 0.000203
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                           13346 0.013549
4 ETW000 [dev trc     ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              32 0.013581
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              35 0.013616
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000                                                                              53 0.013669
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              34 0.013703
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              53 0.013756
4 ETW000 [dev trc     ,00000] New connection 0 created                              23 0.013779
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              39 0.013818
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         45 0.013863
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              32 0.013895
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              37 0.013932
4 ETW000 [dev trc     ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000                                                                             325 0.014257
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         47 0.014304
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          3234 0.017538
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           28 0.017566
4 ETW000 [dev trc     ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.017600
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              35 0.017635
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.017671
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       37 0.017708
4 ETW000 [dev trc     ,00000] Allocating server context handle                      24 0.017732
4 ETW000 [dev trc     ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000                                                                              72 0.017804
4 ETW000 [dev trc     ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000                                                                           36191 0.053995
4 ETW000 [dev trc     ,00000] Allocating user session handle                        73 0.054068
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              43 0.054111
4 ETW000 [dev trc     ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000                                                                           10613 0.064724
4 ETW000 [dev trc     ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000                                                                             964 0.065688
4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000                                                                            1183 0.066871
4 ETW000 [dev trc     ,00000] Disconnecting from connection 0 ...                   73 0.066944
4 ETW000 [dev trc     ,00000] Rolling back transaction ...                          28 0.066972
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000                                                                             146 0.067118
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     409 0.067527
4 ETW000 [dev trc     ,00000] Try to connect with default password                  23 0.067550
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.067584
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              36 0.067620
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.067656
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x110f937a0        22 0.067678
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x110f937a0        41 0.067719
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              37 0.067756
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                           33690 0.101446
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              36 0.101482
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
4 ETW000                                                                             122 0.101604
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000                                                                              34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'P01'"

Procurement Coordinator received Authorization Error when creating Bid Inv

Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity Managers

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

How to create a DB Source system in BW

Hi Guys,
Can anybody explain me how to create DB Connect source system in BW.
Points will be awarded.
Thanks,
Chinna

Hi Chinna,
Below are the steps to be followed for the SS creation in BW :
Prerequisites :
1.System Number
2.System IP address
3.ALEOLTP like userid and password this is the RFC user ID in the R/3 system. Usually set to communication - must be set to dialog in the R/3 Source System for the duration of the create/restore connection process. Note: the password must be in capital letters.(If all instances are in unicode system)
1.At the time of making the connection, the R/3 source system will need to be opened for client independent configuration.
2.If it is a connection create or restore, the personal userid of the person doing the work must have SM59 access.
Follow the naming convention which is being used in your system.
1.     Logon to r/3 source system using the r/3 RFC userid to check that the userid has been set to dialog user. It is mandatory that the r/3 source system userid be setup temporarily as dialog to create the connection. If not contact the requester to have this done before continuing with the next step.
Note: When re-checking to ensure that the r/3 userid is a dialog user, you may get prompted for new password. Change password, and make a note of the new password. Use this new password in the steps that follow for the r/3 RFC userid.
2.     Logon to BW system using your own userid.
3.     Enter transaction RSA1, In Source Systems, right-click on Source Systems as shown below to create new connection.
4.     In the screen select the appropriate Source System connection type. Suppose your are creating connection for r/3 instance, so in this case we pick the very first option.
5.     A popup window will get displayed asking for the necessary information. To fill in the appropriate information in the that screen you need the following information concerning the r/3 source system.
     IP address (Application Server) &
     System Number
Get this information for the r/3 source system from the SAP Logon Pad.
6.     If Parameters have been incorrectly entered then the following error message will appear : Check connection parameters for the source system.
7.     Re-check and re-enter correctly. If all is good then You will see the following prompt : Please log on as an administrator in the following screen.Click green check to continue.
8.     This will bring you to the r/3 logon screen. Logon using the r/3 RFC id. Once logged on click Check in Check RFC destination dialog box.
9. Consider the r/3 RFC destination screen.
10. Check to make sure that BW system information (Userid, IP address, System Number etc) is correctly showing in the Technical Settings and Logon/Security tabs. Next do the following,
     Step 1: Enter password for the BW RFC userid id.
     Step 2: Save Settings
     Step 3: From Test Menu , click on authorization. Ensure there are no errors
     Step 4: Back out of screen.
11.     System may ask you to logon as administrator again. Logon as in Step 10. This time click on Use in Check RFC destination dialog box.
Connection related processing will start up at this time, and continue for a little while (can be a couple minutes or more).
12.     Subsequently, a dialog box will show up on the screen.
13. Pick option, Replicate As Well.
Replication and activation of data sources & transfer structures will begin.
With the completion of this step you will have successfully established this source system connection. To confirm, right-click on the new source system entry and click on check
14. If the connection is good, the following message with the source system ID will display at bottom left corner of screen : Source system connection is Ok.
Hope this will be helpful to you.
Thanks & Regards,
suchitra.V

Error when creating R/3 source system in BW3.5

Similar Messages

Maybe you are looking for