Error when creating Restricted key figure

Hi there,
I created Restricted keyfig with Time diff and ABC as the details of the selection
If time diff is less than X then it should display the values of a keyfigure(ABC),same time if the time diff is greater than x it should display the value of ABC(keyfig)
Note :Here Time diff is of type CHAR.
I've created a charecteristic variable on Time diff,I've mention the Value range as LESS THAN on the varible,and I dragged it to coloumns, however when I check the query its throwing an error as below
Incorrect FRANGE row in FORM/DIM/FAC for info object Time diff.
Kinly help.

Good day,
Please check if SAP Note 1085429 helps.
Try opening the query in Query Designer and then re-saving it.
Hope this helps!
Regards,
Karen

Similar Messages

Creating Restricted Key Figure

Hello all,
When creating a Restricted Key figure do we need to drag and drop both the key figure and also the characteristic?

If you are creating a Restricted key figure by right clicking on the 'Key figures' section in the Infoprovider panel to the left in Query designer then you need to explicitly drag both key figure and then all the characteristics on which you want to restrict this keyfigure.
On the other hand if you are restricting a existing key figure in the Columns section, then you just need to drag the characteristics.
Step by step procedure at
http://help.sap.com/saphelp_nw2004s/helpdata/en/61/d0b143aa26b849b4e79a859ea1d7d1/frameset.htm
Regards, Uday
Assign points for helpful answers and get one point for yourself

Create restricted key figure with navigation attributes

Hi,
I need to create a restricted key figure using attributes of 0BP_COMPET.
On my report is :
Competitors (0BP_COMPET)
Quantity
Active Competitors = Expiry Date of Minority Status greater than or equal to system date
Inactive Competitors = Expiry Date of Minority Status less than to system date
Note : Expiry Date of Minority Status is a navigation attribute of 0BP_COMPET and system date is generate by variable 0DAT - Current Calendar Day (SAP Exit).
How can i apply the formula?
Thanks

Here's a good How to Document that explains what you are trying to do ....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
It is called How to.... Calculate with Attributes.
Brian

Error when creating ssh keys for Oracle RAC on Solaris 10

I'm in the process of configuring 2 node oracle cluster running on Sun cluster 3.2 /solaris 10 OS.
I have followed this oracle guide to when creating keys (oracle document No =B14205-01)
But im having problem when executing this step
bash-3.00$ scp authorized_keys tsavo-east:/oracle/.ssh/
ssh: connect to host tsavo-east port 22: Connection timed out
lost connection
bash-3.00$
Please advise
Thanks
Francis Mwangi

Robert Thanks alot for your reply. have a look of what i found out
ps -ef | grep sshd
root 4270 4267 0 16:22:46 ? 0:00 /usr/lib/ssh/sshd
root 759 1 0 Nov 09 ? 0:00 /usr/lib/ssh/sshd
root 4267 759 0 16:22:41 ? 0:00 /usr/lib/ssh/sshd
root 4372 4311 0 18:56:52 pts/3 0:00 grep sshd
===================================
netstat -a | grep ssh
*.ssh *.* 0 0 49152 0 LISTEN
tsavo-west.ssh 10.30.210.213.2241 63668 51 49640 0 ESTABLISHED
*.ssh *.* 49152 0 LISTEN
6002b4aec88 stream-ord 6002b5a0740 00000000 /tmp/ssh-mgPl3398/agent.3398
==============================
telnet tsavo-west 22
Trying 10.20.3.151...
Connected to tsavo-west.
Escape character is '^]'.
SSH-2.0-Sun_SSH_1.1.1
#has hanged here for the last 10 minutes
Thanks please what can you conclude from above; also from the console monitoring both nodes
i saw messages that end with
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to up
#another line here
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to down
#another line here
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to up
this happens on both nodes
Any idea
did i use the right document. have other steps that works (anyway not sure if this error are related to the stepsfor configuring ssh)
Please help if you can ....

Error CL_RSD_MULTIPROV in Query Designer while restricting Key Figures

Hello,
I am trying to create Query on Multiprovider in Production envirnoment.
I drag key figure in row and try to restrict it to Product Hierarchies as I don't want to create restricted Key figure.
While Saving Query I am getting following Error Massage.
'System error in Program CL_RSD_MULTIPROV and Form GET_PART_IOBJNM_CMP-01'.
When I save Query without giving any restriction in Key Figure . I could save it.
Please suggest in above error.
Thanks and Regards,

Hi,
Check the note 1090490.
hope this helps,
Regards,
Rama Murthy.

Creation of restricted key figure

hi experts,
when i will create restricted key figure and calculated key figure for reporting.any one suggest that.
regards,
balu.

Hi,
Restricted Key fig:
By using restricted key fig you can restrict only one key fig column based on the value of char. Assume that you have a query with key figs Price, Qty and Revenue.If u restrict Revenue based on chars i.e either time or customer Id or Material Id etc only that revenue key fig coulumn will be effected.
Calculate Key Fig:
Calculated Key fig is nothing but creation of new key fig using existing key figures. Assume that you have a query with key figs Price and Qty only. If you want to find Revenue as
Revenue = Price * Qty, go for Calculated Key figure.
Assign points if it helps u.
Cheers....
Sk Babu

Automation error while creating restricted keyfigure

Hi Friends,
I'm trying to create one restricted keyfigure on amount field with characterstic restriction value type is 10 , so here getting automation error: The object invoked has diconnected from its clients. The same i tried to on IDES system,and able to create restricted key figure without any problem. What might be the problem.
Appreciate ur help with points.
thanks,
RP

hi,
yes i have tested with other values, but same error getting. After clicking Ok button(or close window button), i'm disconnected from query designer. If it is excel connectivity issue with server,
what have to be done?
For resolving this, do we need to do any settings? If yes, pls suggest so that i can inform to admin team.
thanks,
RP

Restricted key figure for more than one key figure

hi all
i want to restrict almost three keyfigures based on the same posting period. So instead of creating restricted key figures for each key figures can i create a RKF for all the three key figures based on the same posting period.
Is there any way i can do that.
thanks and regards
vijaykumar

hello Chandra,
if those are the only 3 keyfigures in the query, you can have posting period restricted to the required period in the filter area( if u dont want to the period to be displayed) or else you can restrict the period in the rows/free chars area too.
you can restrict the posting period using variable with period value as a user input value.
If there are other key figures too, then you need to create 3 diffrent restricted key figures restricted for this period.
thanks,

Creating a restricted key figure in BI7 reporting

Hi
I am creating a restricted key figure globally in BI7 query designer, whenever I try to restrict Calender Year /Month, an error message pops up showing:
Runtime error '457' (This key is already associated with an element of this collection), when I click ok another message opens
Runtime error '429' (Active X component can't create object)
and finally Microsoft VB runtime error
Automation (The callee(servernot server application) is not applicable and disappeared; all connections are invalid. The call may have executed.
I am working in BI 7, SAP gui 640 what could be the problem in BI 7???because the same thing is working in BI 3.5 environment.
Regards
Indraneel

Hi Indraneel,
Try to look for the patch level you are using for SAP GUI, it should be level 14. If lesser than this apply and check. And always disable VB macros.
Assign points if helps.
-Harshal

How to create Calculated/Restricted Key Figures in AO

All,
In our project we are consuming Bex Queries for AO Analysis. In these we have lot of calculated/restricted key figures. In bex we can restrict 2 characterstics to one Keyfigure, So can we able to create calculated/restricted KF in AO
Regards,
John

Hello Tammy,
We are having a reqauirement in which we have 5 Bex queries built on the same infoporvider and we are trying to consolidate all the 5 queries to one single generic Bex query or two. So in AO we would like to consume this query and build different AO workbooks to meet all the old 5 queries requirement.
So as part of this process, I would like to know can we create calculate/restricted KF's in AO , that way i can make a better decision to create them in Bex VS AO.
Thanks for your inputs in advance.
Regards,
John
Message was edited by: sunny johnson

Steps to create a Restricted Key Figure

Hi,
I am trying to create a BEx Query and want to create a Restricted Key Figure.
I am using BEx 7.x.
Please help me with steps to create a Restricted Key FIgure.
Thnaks and Regards,
Shreyas Shah

Hi Shreyas,
Please find the step by step to create a restricted key figures.
Procedure for Defining a new restricted key figure:
1. In the InfoProvider screen area, select the Key Figures entry and choose New Restricted Key Figure from the context menu (secondary mouse button).
If a restricted key figure has already been defined for this InfoProvider, you can also select the Restricted Key Figures entry and then choose New Restricted Key Figure from the context menu.
The entry New Restricted Key Figure is inserted and the properties for the restricted key figure are displayed in the Properties screen area.
2. Select the New Restricted Key Figure entry and choose Edit from the context menu (secondary mouse button).
The Change Restricted Key Figure dialog box appears.
You can also call the Change Restricted Key Figure dialog box from the Properties screen area by choosing the Edit pushbutton.
You make the basic settings on the General tab page.
The text field, in which you can enter a description of the restricted key figure, is found in the upper part of the screen.
You can use text variables in the description (see Using Text Variables).
Next to that, you can enter a technical name in the Technical Name field.
Underneath the text field, to the left of the Detail View area, the directory of all objects available in the InfoProvider is displayed. The empty field for defining the restricted key figure (Details of the Selection) is on the right-hand side of the screen.
3. Using drag and drop, choose a key figure from the InfoProvider and restrict it by selecting one or more characteristic values. See Restricting Characteristics.
You can also use variables instead of characteristic values. However, note that you cannot use the following variable types in restricted key figures for technical reasons:
Variables with the process type Replacement with Query (see also Replacement Path: Replacement with Querys)
Variables that represent a precalculated value set (see also Details)
You can use these variable types to restrict characteristics in the rows, columns, or in the filter.
4. Make any necessary settings for the properties of the restricted key figure on the other tab pages. See Selection/Formula Propertiess.
5. Choose OK. The new restricted key figure is defined for the InfoProvider.
Let me know if this helps.
Thanks
Sachin

Restricted key figure doesn't work when restricted objected used in Structure

Hi Experts,
We've a requirement where user wants to restrict ABC key figure with z object. This z objects also used in structure as well, because of that this restricted key figure is not working.
We understand it can't be used in two structure and user wants to keep this object in structure as well.
Is there a workaround to make it work?
Requirement brief overview:
Say I've restricted key figure gross avail percentage and which is restricted by retail group A and B. This retail group is also used in Structure as well (in row). As said users want to keep retails group in structure and want to restrict only one key figure with two retail group A and B.
But this combination is not working. Please can someone recommend any other way to achieve this requirement.
Thanks,

Hi Yasmine,
Yes, I've reloaded the data again. Also, I've mapped correctly in cube. But still I can't see data.
I've checked customer master data , there is no data for this field.
In transformation I've mapped retail group with the new field as well.
When I tried to activate master data , it's saying it's possible only via attribute change run.
I've realised 0CUSTOMER_ZRETGRP (old field) also used in two aggregates.
Do I need to add this in aggregates?
How to activate master data so data will appear in cube?
Is there any programme to activate via attribute change run?
Thanks

How to Create a Restricted Key Figure in BO Webi Report

Hi Experts,
Please tell me How to Create a Restricted Key Figure in BO Webi Report.
Thanks in Advance.
Regards,
Rafi

Hi,
1. Define a new measure in the designer.
2. In the select clause give the reference to the key figure on which restriction to be applied.
For example
@Select(Key Figures\Number of Records)
3. In the where clause, give the MDX expression for the filter to be applied.
For example
<FILTER KEY="[0PURCH_ORG].[LEVEL01]">
<CONDITION OPERATORCONDITION="InList">
<CONSTANT CAPTION="HAS"/>
</CONDITION>
</FILTER>
Regards

One Variable 2 Restricted key figures on 2 different Dimensions

Hi all,
Here is my problem:
I have a cube based on SD sales items. I want to calculate 2 retricted key figures on the 0net_value retricted by a date.
The first key would be restricted by the installation date, and the second one by the cancellation date.
Those two dates are set using a user input.
When I try to do this here the error message I get:
"Variable ZD_CSDATE is used in both (structure) element EL099Z0TL38F14TMC6AL7XKQD, and element EN4ZFAZEYGZ36B06JU04297W5 for various characteristics (0CANC_DATE, 0UCINSTDATE). This is not permitted as the characteristic is required for the F4 value help structure."
I created 2 variables set by customer exit, this solve the problem but is not convenient at all. So who could use one and only one variable or how can create a variable by copy of another one?
Thanks
Matthieu


Hi
 
I am sure you can make more than one Restricted Key Figures which are restricted to same variable value for some Characteristic. And secondly there is no easy copy and paste option to create 2 Customer Exit Variables. You need to find out the ABAP Code written using T-Code: CMODE for the Variable Exit and there you can copy and paste a part of this code to populate new variable. If you check the ABAP Code, you would understand what I am saying. 
I am more surprised at that F4 Help in the error message. Please investigate more in that direction.
 Hope it helps.
 
Cheers
Abhijit
 * It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

Restricted Key figure - Displaying as normal number instead of currency

Hello,
I'm creating a restricted key figure using 0AMOUNT which of course is currency, however in the cube that I'm using 0AMOUNT is used for both Dollars and Quantities. The problem is 1) it is always displaying a $ symbol in front of the key figure and 2) it seems when I try to create a calculated key figure and try to add the 0AMOUNT to another 0QUANTITY infoObject I get an error (I'm presumming because I'm trying to add a number to a currency infoObject).
So my question(s) are 1) Can I format my new restricted key figure to always display as Quantity even though it's a currency info object
and 2) Can I do a calculated key figure adding a Currency InfoObject to a Quantity infoObject?
Thank you very much!
-Patrick

1) For your first question, u don't to have the currency dollar displayed for the restricted 0amount instead you want the unit of quanity.?if you want to do this,you could make use of Excel's format options i.e go to
format-->.Style->Select the stdBexInput item and make the appropriate settings.
2) You can use NODIM() function to add two different keyfigures.

Error when creating Restricted key figure

Similar Messages

Maybe you are looking for