Error when creating Room Mailboxes

I receive the following error below when I create resource mailboxes. Does anyone know why?
Note: This is a hardened environment to STIG and NIST GCB.
A) Rooms seem to function properly after I create them. I can schedule meetings, etc. But I receive this error every time I create one.
This mailbox was created successfully, but some properties weren't saved. Close this message, then in the Mailboxes list, double-click this mailbox, set the properties, and click Save.
Modified the error to remove organization-specific config. It shows the proper org info for CN and O in my message.
Additional Note
So it seems when I went into ADSI Edit, the System Attendant "homemdb" field was blank.
During initial configuration of the Mailbox servers, I had created a new Database (and replicated it), migrated the Arbitration mailboxes to the new database.
However, it seems that this field was never updated or changed. I tried modifying the homemdb field to the proper MailDB DN. I performed this for both mailbox servers' System Attendants in AD and am waiting for replication to see if this fixes it. I may
have to restart my mailbox server. Restarting the Information Store or Mailbox Assistants services did not change anything.
Cannot open mailbox /o=Contoso/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MBX001/cn=Microsoft System Attendant.

Hi Mike,
I found a similar thread for your reference:
http://community.office365.com/en-us/f/158/t/18424.aspx
Workaround:
Click Close and are still able to change the properties of the room mailbox. After clicking Save and waiting for a few minutes, the error message disappears.
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

Error when Creating new Mailbox - PowerShell - Storage Error

Hi Guys,
I have been working on a new exchange install and when I try to create a new mailbox or new mailboxdatabase I keep getting the following error.
WARNING: The cmdlet extension agent with the index 0 has thrown an exception in OnComplete(). The exception is:
System.TypeInitializationException: The type initializer for
'Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary' threw an exception. --->
System.NotSupportedException: Not supported field(MailEnabled)
type(Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition).
   at
Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary.PropertyDefinitionSets.BuildWellKnownSets()
   at Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary..cctor()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition.TryFindEquivalentDefinition(PropTagKey key, Boolean
isCustom, PropType type, TypeCheckingFlag typeCheckingFlag, PropertyTagPropertyDefinition& definition, Boolean&
createNewDefinition)
   at Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition.InternalCreate(String displayName, PropTag
propertyTag, PropertyFlags flags, TypeCheckingFlag typeCheckingFlag, Boolean isCustom, PropertyDefinitionConstraint[]
constraints)
   at Microsoft.Exchange.Data.Storage.PropertyTagCache.InternalPropertyDefinitionsFromPropTags(TypeCheckingFlag
propertyTypeCheckingFlag, MapiProp mapiProp, StoreSession storeSession, PropTag[] propTags, Int32&
resolvedPropertyCount)
   at Microsoft.Exchange.Data.Storage.RecipientTable.GetRecipientPropertyDefinitionsFromMapiTable(Boolean&
originalColumnsChanged)
   at Microsoft.Exchange.Data.Storage.RecipientTable.BuildRecipientCollection(Action`2 recipientCollectionBuilder)
   at Microsoft.Exchange.Data.Storage.CoreRecipientCollection..ctor(ICoreItem coreItem)
   at Microsoft.Exchange.Data.Storage.CoreItem.Microsoft.Exchange.Data.Storage.ICoreItem.GetRecipientCollection(Boolean
forceOpen)
   at Microsoft.Exchange.Data.Storage.CoreItem.GetRecipientCharsetDetectionData(StringBuilder stringBuilder, Boolean
isComplete)
   at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.BuildCodePageDetector(MemoryStream& cachedHtmlBody)
   at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.DetectCpidWithOptions(Charset userCharset, MemoryStream&
cachedHtmlBody)
   at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.SetCachedBodyDataAndDetectCharset(Char[] cachedBodyData,
Charset userCharset, BodyCharsetFlags charsetFlags)
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.CalculateCharset()
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.OnBufferFull()
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.CloseDetectorConversionStream()
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.Flush()
   at Microsoft.Exchange.Data.TextConverters.ConverterEncodingOutput.Flush()
   at Microsoft.Exchange.Data.TextConverters.Internal.Text.TextCodePageConverter.Run()
   at Microsoft.Exchange.Data.TextConverters.Internal.Text.TextCodePageConverter.Flush()
   at Microsoft.Exchange.Data.TextConverters.ConverterWriter.Flush()
   at Microsoft.Exchange.Data.TextConverters.ConverterWriter.Dispose(Boolean disposing)
   at System.IO.TextWriter.Close()
   at Microsoft.Exchange.Data.Storage.BodyTextWriter.<CloseWriter>b__11()
   at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, LocalizedString
exceptionString, CtsCall ctsCall)
   at Microsoft.Exchange.Data.Storage.BodyTextWriter.CloseWriter()
   at Microsoft.Exchange.Data.Storage.BodyTextWriter.Dispose(Boolean disposing)
   at System.IO.TextWriter.Dispose()
   at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data,
LogMessageDelegate logMessage)
   at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)
   at Microsoft.Exchange.Provisioning.ProvisioningLayer.OnComplete(Task task, Boolean succeeded, Exception exception)
Does anyone have any idea what is causing this, the server is running Microsoft Exchange 2010 SP2. I don't want to complete an upgrade to SP3 until I have got this issue resolved first.
Any suggestion are welcome.
Kind Regards
TPark IT Technician

In terms of what's causing it, the clue is in the stack above.
its one of the cmdlet extension agents. Which one? Well the one at index 0
Run this, and you should find its the Mailbox Creation Time Agent
Get-CmdletExtensionAgent | select Name, priority
Get-CmdletExtensionAgent | select Name, priority
I'd then run Test-Servicehealth to check services are all responding.
Can you post the exact command you are running to get this?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Error when creating index with parallel option on very large table

I am getting a
"7:15:52 AM ORA-00600: internal error code, arguments: [kxfqupp_bad_cvl], [7940], [6], [0], [], [], [], []"
error when creating an index with parallel option. Which is strange because this has not been a problem until now. We just hit 60 million rows in a 45 column table, and I wonder if we've hit a bug.
Version 10.2.0.4
O/S Linux
As a test I removed the parallel option and several of the indexes were created with no problem, but many still threw the same error... Strange. Do I need a patch update of some kind?

This is most certainly a bug.
From metalink it looks like bug 4695511 - fixed in 10.2.0.4.1

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Error when creating a folder ,iviews in the portal

Dear sap gurus ,
I m facing a error when creating a Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
Portal Runtime Error
An exception occurred while processing a request for :
<b>iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
Exception id: 10:50_23/11/07_0005_16892850
See the details for the exception ID in the log file</b>
Thanks and Regards,
sathya

Hi Sathya
The following line in your log tells you what is wrong:
ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
Br
Göran

Error when creating a FDM application on SQL Server 2005

Hi,
we are getting this error when creating a FDM application on SQL Server 2005
Error: EPMCSS-07003: Failed to validate identity. Invalid identity . Check identity.[SET_ROLES_LIST]
We are using Windows System Integration although we have also tested with sa user.
Any ideas?
Thanks

Based on the error message it appears to be having a Shared Services issue. Verify that the "ADMIN" account is being used for the HSS connection and that you are using "ADMIN" to create the application and see if the same error is returned.

Error when creating a webpart page in site pages - Sharepoint 2013

Hi,
I am getting Unexpected error when creating a new webpart page in site pages on sharepoint 2013 site.
I have no clue on this.
Any help is much appreciated.
Thank in advance.
Smile Always

Hi Smile,
For troubleshooting this issue, let's verify the followings:
Whether you can create wiki pages well.
Whether this issue occurs for other sties.
Whether all users have this issue. Please test with Site administrator, compare the result.
As Naveen said, please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error when Creating a ServiceClientFactory instance JAVA API

When invoking Assembling a PDF document quick start I'm having a compilation error when creating a ServiceClientFactory instance:
//Create a ServiceClientFactory instance
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
The error is: The type com.adobe.idp.Context cannot be resolved. It is indirectly referenced from required .class files
All the required jars are a path.
What esle can be a problem ?
Thanks, Yan

Since you are using SOAP, you need to have the AXIS jars available. They are in the LiveCycle_ES_SDK\client-libs\thirdparty directory:
activation.jar (required for SOAP mode)
axis.jar (required for SOAP mode)
commons-codec-1.3.jar (required for SOAP mode)
commons-collections-3.1.jar (required for SOAP mode)
commons-discovery.jar (required for SOAP mode)
commons-logging.jar (required for SOAP mode)
dom3-xml-apis-2.5.0.jar (required for SOAP mode)
jaxen-1.1-beta-9.jar (required for SOAP mode)
jaxrpc.jar (required for SOAP mode)
log4j.jar (required for SOAP mode)
mail.jar (required for SOAP mode)
saaj.jar (required for SOAP mode)
wsdl4j.jar (required for SOAP mode)
xalan.jar (required for SOAP mode)
xbean.jar (required for SOAP mode)
xercesImpl.jar (required for SOAP mode)

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

Syntax error when creating a user-defined table type in SQL Server 2012

Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.

Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you

Runtime Error when creating a new group

I'm getting a runtime error when creating a new group on a site collection?
Thanks in advance

The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar

Procurement Coordinator received Authorization Error when creating Bid Inv

Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity Managers

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Publish to portal error when creating a iview

hi gurus,
I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
Error:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
Regards

yes i have used that tool,,,i am getting below error.
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
RED
The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
I have checked everything,,but still geting red lights
Regards

Error when create purchase order

Hi all,
I have a strange error when create po. it is display : Please enter item number greater than 0.that only a vendor and a material.I check the vendor and the material is same as other vendor and materials.if i first input the vendor and input the material then display message : Please enter item number greater than 0,but i can't input the item number. if i first input material and enter,then input vendor the system is ok. I check configer is ok. and other vendor , material also ok.
thanks to reply.
james

Hi,
Go to SPRO-Materials Management-Purchasing-Purchase Order-Define Document Types..
Select your doc type which you are selcting at the time of PO creation..
Say for e.g. NB.
Now you have to maintain " Item Number Interval" as 10 in front of your doc type.
This option is just after "Document Type Description".
Now save and check.
Cheers...
Utsav..

Error when Create User Defined Field

Hi all, i got an error when create UDF
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Here is part of my code
oUserFieldMD.Name = fieldname
        oUserFieldMD.Description = fielddesc
        oUserFieldMD.Type = fieldtype
        oUserFieldMD.DefaultValue = defaultValue.ToString()
        If fieldtype <> SAPbobsCOM.BoFieldTypes.db_Date Then
            oUserFieldMD.Size = fieldlength
            oUserFieldMD.EditSize = fieldlength
        End If
        If fieldtype = SAPbobsCOM.BoFieldTypes.db_Float Then
            oUserFieldMD.SubType = SAPbobsCOM.BoFldSubTypes.st_Price
        Else
            oUserFieldMD.SubType = SAPbobsCOM.BoFldSubTypes.st_None
        End If
        oUserFieldMD.TableName = tablename
        lRetVal = oUserFieldMD.Add()
        prgbar.Value = prgbar.Value + 1
        If (lRetVal <> 0) Then
            msgs.Add(tablename & " - " & fieldname & " : " & oCompany.GetLastErrorDescription())
        Else
            msgs.Add(tablename & " - " & fieldname & " : successfully created!")
        End If
the error come when reach lRetVal = oUserFieldMD.Add()
what is wrong with my code ?
thanks.

This could be a x64/x86 problem. Try following this thread
[GetCompanyService|GetCompanyService] and recompile your code for the platform you need.

Error when creating Room Mailboxes

Similar Messages

Maybe you are looking for