Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

Similar Messages

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon Client for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

Error message: While activating source system in RSA1

When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
System response: Error when sending data to BW.
Procedure: Enter Idoc type ZSAE008.
Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
Can anybody kindly help me resolve the issue.
Message was edited by:
Muzafaruddin Mohammed

Hi,
You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P

Change Default Background User In BW When Creating New Source System

Hi all,
I would like to create a new Source System in RSA1.
In Source Systems > SAP > Create > Connection of source system to BW
the Default background user in BW is u201CALEREMOTEu201D.
How do I change this to another user?

Just want to say thank you. I could fix a problem with your information.
I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.

Create sap-source system in netweaver

Hello,
i want to create a R/3-(4.6c)-source system in my Netweaver-BI (2004s), but I have problems with the connection.
For the connection i created in the Netweaver a new destination and a user "User_A" with the profile "S_BI-WX_RFC / Business Information Warehouse: RFC-User in Warehouse.
In the R/3 I created a user "User_B" with the profile "S_BI-WX_RFC / Business Information Warehouse, RFC-User Extraction"
After creating the Source-System in the AWB with the destination and the 2 Users, I have to Log-On as an administrator in the R/3. After Log-In comes the message "User already exists in source system. Only continue if Profile and Password Are Correct."
Then I have to create the Destination in the R/3. There I fill in the "Logon"-Part my "User_A", but then I get the alert:
RFC user logon failed. Check the connection. Message no. R3 077.
Diagnosis: You tried to logon using the RFC user. This action failed.
System response: Name or Password not correct
But I'm sure that I made no mistake with the password.
Has anyone an idea what I did wrong?
Thanks
Malte

Hi,
Generally we maintain the Destinations and userids in both systems first, and then create the source sytem in AWB of BIW.
Have you created the Logical system names in both the systems ?
Have assigned the client to the logical system name to client in both systems?
Have you mentioned correct client in the destinations?
With rgds,
Anil Kumar Sharma .P

Error when creating a source of supply list via me01 and/otr me05

Dear expert,
We use SAP R/3 4.6c release.
I'm trying to create a source of supply that uses a contract.
I get an error message 'Object does not exist'.
When I look at the details of this messsage I see it is
Message OL 826
Diagnosis :
You tried to create an instance of the object type BUS2053 with the key
0000000000001026311990. No instance of this kind exists.
I have checked SW01 and regenerated the object type BUS2053. The generated object looks ok, but when I test it it still comes up with the same error message.
What did I forget?

HI ,
This is a program error .
Implement Note 683767.
According ti this note it will solve the following problem which is similar to your problem
"When you try to maintain a source list using Transaction ME01, the system generates a termination message with number OL826 'You tried to create an instance of the object type BUS2053 with the key. No instance of this kind exists'. "
Hope it helps you .
Regards,
Anupam

SAP Source System showing up as BI Source System in RSA1

I have 2 BW systems and 2 CRM Systems. In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
The Logicial Systems and RFC Connections all appear to be the same between each pair.
In the other system, using identical procedure, it the source system gets listed as a BI Source System. The 2 CRM systems have identical components and version levels as do the 2 BW systems.
Any idea why and if this would make any difference and how to correct.

Hi,
To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
Rgds,
Colum

Creating new Source system problem

Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
Kumar

Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen

SAP Source system creation in BI

Hi Gurus,
I am trying to create SAP source system in BI, The trying to create ALE REMOTE user in both systems.
What roles and profiles i need to assign to this user id. After creating user ids what steps i need to follow. Thanks.
Best Regards,
Suresh.

Hi,
To Create SAP Source System In BI:
-Click on Source System tab in RSA1.
-Then right click on the heading Source system and select Create.
-Select the first option Automatic. Create SAP System and continue filling the other details.
-This will create Source system automatically.
When you enter background user's password, sap system user name is modifiable, but the the BI user.
The background user of BI system, is defined in
RSA1 => Settings => Global Settings
BW User ALE field will have the name of the background user in BI.
If you are using ALEREMOTE as background user, make sure the same is maintained as BW User ALE.
regards,
Pruthvi R
Message was edited by:
Pruthvi R

Create ECC source systems to talk to BI

I am a developer and the system that I am working with do not have the source systems created. There is no Basis support here yet. Would someone help by listing the steps to create the source systems, so that the ECC systems can talk to the BI NW2004s system? I want to be able to load data.

Hi,
Please check these links.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps
Regards.

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

Error when creating source system

Hi,
Could someone help me to solve this issue :When I want to create a source system D99100 in BI , I get the following message:
the test and remore connection via sm59 in BI are OK.
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system D99100 does not accept any of the proposed values.
The last proposed value was B9.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely B9, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

Hello,
By this time your issue might be resolved.
When you are trying to Connect or Reactivate source systems you might get this error. In the source system (R/3) check the table entries RSBASIDOC. Some reason after system copy, these entries should correct if you run BDLS and some time it mess up.
Go the table and go to the edit mode and change the entrie for that RFC destination. Change the filed TSPREFIX to some thing else and save it. Go back to BW and try to reconnect and you will be able to connect it.
Hope this helps in the future for this thread.
PREDDY.

Error when we create the source system file

i am creating the source system file of ECC to BI. how to slove this problam. when i am trying activating this error is getting.
The following errors occurred in the source system: RSAR 374
Result of the destination check: Timeout RSAR 375

Mr. Reddy,
Check out this links.
Error while source system creation/Source system transport
Hope it helps you.
SRS

Unable to Create Source system in RSA1

I have installed a BI Server(Netweaver 2004s). When i try to add source system in RSA1, it gives an error "No entry for BW_USER in table RSADMIN available"
Let me tell what all i tried.
1) i clicked on settings>global settings- it gives a blank page. when i switch it to change mode, there is a button called "Position" and then "Entry1 of 2". I cant enter any value there and when i click on "Position" button, it says "Table RSADMINAV has no relevant fields"
2) In se16 tried to maintain RSADMINA table and for BW User field, i gave BW_USER, but there is no "execute" Button. all i see is "Reset" button. i tried pressing F8 key, it wont do anything. I clicked on save but it says "the entry is already exist"
Regarding RFC - i created a user BW_USER in ERP Sytem and ERP_USER in BI server and both the user type are System user.
From both the server i tried to do Connection test and i am not getting any error. but if i try clicking Remote Connection, it wont connect and wont do anything and no Errors.
Please help me Resolving this Issue, Since it became a very critical issue.

Hi,
Can you check if there is any other user ID specified in "BW user for ALE".
To check, Go to transaction RSA1 --> Settings --> Global Settings.
If you find a different user id there, then specify the correct BW user id there.
Please refer to OSS Note 410952 for details.
Hope this solves your problem!!
Regards,
Raj.
Edited by: Raj on Aug 14, 2009 8:15 PM
Edited by: Raj on Aug 14, 2009 8:16 PM

Creating source system in RSA1

Hi guys,
Im trying to create a source system in the TC RSA1 between R/3 PRO y BW PRO. But at the end of the process it sent me the message Source system already exists. There is no other source system for R/3 created. What can it be?
Thanks a lot
Regards,
Vic

Hi Vic,
Goto sm59 and delete the logical system for the R/3 system and retry the steps again.
Check this doc:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
The steps for creating source system (automatic option in RSA1)is as follows:
1.Create remote logons in both the systems.
2.RSA1 -> Source system -> Create source system -> automatic creation
3. Enter the details of the R/3 system and the Remote logon ids of both the system. In case you are using BI 3.5 or greater + R/3 4.7 or greater the password is "case sensitive" hence have all the passwords in CAPS.
4. Now the system would create a remote logon and show up the remote logon screen. In that screen -> "logon and security" -> enter the remote logon id and password and save. Now the remote logon should not work from there.
The connection is established.
Bye
Dinesh

Error when creating SAP source-system in RSA1

Similar Messages

Maybe you are looking for