Error when creating Task List: No Consolidation System found
All-
Configuring my Retrofit Scenario. My Project Landscape is maintained as following:
Dev(100) --> QA (200) --> Prod (300) with Retrofit (XXX)
Dev(XXX) --> QA 250
I am getting this error when I try to refresh the project or create a Task List
*No consolidation system found for <SID>-250 (project RETROFIT3)
Message no. /TMWFLOW/TRACK_N806*
If my QA client (250) is already maintained as a QA logical component. What else is missing?
Hi,
I have done something similar and getting error /TMWFLOW/TRACK_N806
My Transport route looks something like
System GND ZGND > 300 System GNQ 300> 300 System GNP
Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
Please advice.
Regards
Ankan
Similar Messages
-
Error when creating Task List in ChaRM
I am getting this error after I activate Change Request Management and attempt to create a task list.
Error writing to table /TMWFLOW/PROJCTC
Message No. /TMWFLOW/TASKLIST177
There is no long text. Please adviseConfiguring ChaRM in a new client, entries in the table above already existed for the maintenance cycle the new client was trying to generate. deleted entries form database.
-
Integration Builder - runtime data cache - Error when creating cache list
All,
When I go into the Integration Builder --> Administration --> Runtime tab --> Data Cache
I get a message saying "Error when creating cache list".
All cache areas look ok and I do not see any other error.
Also, RFC INTEGRATION_DIRECTORY_HMI looks good.
Please advise.
Thanks a lot.Hi,
Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
regards,
ganesh. -
Error when creating cache list
Hi,
We have installed SAP PI 7.1 on AIX 5.3.
When we check Data cache Overview (RWB-- Administration) we are getting an error "Error when creating cache list"
Also
While trying to Test Cache Connectivity Test under RWB--->Component Monitoring,
we are facing the below issue "Cache notification from Integration Directory failed: Error when notifying cache receiver Unable to notify integration runtime (Java) of data changes
For input string: "ngsvawrk211.uk.corporg.net" Attempt to fetch cache data from Integration Directory not yet started or still in process".
Please help me to resovle this issue.
Thanks
DeepuHI,
Is this problem solved ?
Plz let me know if you have find any solution for this.
Thanks & Regards,
Mahesh -
Error while creating task list
Hi All,
I am configuring change management , i have created project and assigned logical component for that when i create task list it gives below error .
For object /TMWFLOW/M , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
I have already maintained number ranges.
Thanks
SantoshHi ,
Make sure you maintain the number range interval to be no. "01" and not "1" or anything else. I kept getting the "Error reading information for number range object /TMWFLOW/D" (and /M/ and /V) even though I had added the number range interval as described in the manual. As soon as I deleted the interval "1" and put it back with "01" that check passed and I could create a task list.
Thanks
Abullais -
Error in creating task list /TMWFLOW/PROJCTC
Hello,
We are implementing charm in release 7.1. We are getting an error some times that says that user was not able to create a task list for an urgent correction SMHF.
The error message says:
There is no active task list in the associated project
However we run the charmcheck transaction and no error for the project. Error SOCM_ACTION_LOG014.
Then we got the error saying
"Task list H.xxxxxxxx not created by user mmmmmmmmm
Error writing to table /TMWFLOW/PROJCTC"
Errors are
/TMWFLOW/TASKLIST304
/TMWFLOW/TASKLIST177
When we start testing early in the morning we can create the first ticket with no problem (every day the system is down for backup and then restarted). However, subsequent ticket show this same error.
We checked SLG1, ST22, and SM12 to find any error, however we are not able to find any problem.
We think that problem is that something is blocking, however we are not able to find the error.
Please advice
Many thanks
Javier MandiroalHello all,
We are facing the same issue. While creating ZMHF (custom Urgent Change) users "sometime" receive error "There is no active task list in the associated project"
Hi Mateus , the document is you mentioned is currently expired / unavailable. Can you kindly upload the same again please?
Thanks in advance,
Shaji Narayanan -
Encoutered ABAP ShortDumps Error When Create task in cProjects
Hi all,
When i tried to create tasks in cProjects, the following error pages exists.
I believed it was issues related with authorization.
my authorization was assigned as composite role SAP_CPR_PROJECT_LEAD
+++++++++++++++++++++++++++++++++++++
Error when processing your request
What has happened?
The URL http://rabr3dci.rab.erp:8000/SAP/BC/BSP/SAP/CPROJECTS/root.do was not called due to an error.
Note
The following error text was processed in the system RD1 : The current application triggered a termination with a short dump.
The error occurred on the application server RABR3DCI_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: ON_TRANSACTION_FINISHED of program CL_DPR_TRANSACTION_MANAGER====CP
Form: RAISE_TRANSACTION_FINISHED of program CL_SYSTEM_TRANSACTION_STATE===CP
Form: %_AFTER_ROLLBACK of program SAPMSSY0
Form: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Form: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system RD1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server RABR3DCI_RD1_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server RABR3DCI_RD1_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: TESTS -l: E -s: RD1 -i: RABR3DCI_RD1_00 -w: 0 -d: 20080507 -t: 222343 -v: RABAX_STATE -e: MESSAGE_TYPE_X
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
+++++++++++++++++++++++++++++++++++++++++++++++
Below thread was quite similar with problem that I encountered however i
am doubtful how could i proceed with proper solution.
Can a project creator in cProjects Assign himself a role?
Thanks.
Point awards if its was helpful.
BR,
TowABAP Dump Error logs
+++++++++++++++++++++++++++++++++++++++++++++
Runtime Error MESSAGE_TYPE_X
Date and Time 07.05.2008 21:11:19
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
ROLLBACK WORK during ON COMMIT or ON ROLLBACK
Technical information about the message:
Message classe...... 00
Number.............. 086
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"CL_DPR_TRANSACTION_MANAGER====CP" or "CL_DPR_TRANSACTION_MANAGER====CM009"
"ON_TRANSACTION_FINISHED"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_DPR_TRANSACTION_MANAGER====CP"
in "ON_TRANSACTION_FINISHED".
The main program was "SAPMHTTP ".
The termination occurred in line 17 of the source code of the (Include)
program "CL_DPR_TRANSACTION_MANAGER====CM009"
of the source code of program "CL_DPR_TRANSACTION_MANAGER====CM009" (when
calling the editor 170).
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMHTTP
SYST . . : : 00004608
5\0\0\0\x0001\0\x0008\0\0\0\0\0\x0001\0\0\0\0\0\0\0\0\0\0
Program SAPLHTTP_RUNTIME
ICFMEMORY . . : : 00003024
IC0/SAP/BC/BSP/SAP/CPROJECTS/root.do
Program SAPLLANG
T002 . . : : 00000010
ES1EN|
Program SAPLSDEX
DD07L . . : : 00000118
SPERS_TYPE A00030000
Program SAPLSSCU
USR02 . . : : 00000380
100CPROJECTS 㲷や褢륡0000000000000000A \0
Program SAPLPRGN
AGR_DEFINE . . : : 00000266
100Z_CPROJECTS_COMP
AGR_TEXTS . . : : 00000238
100SAP_CPR_USER E00000cProjects User
+++++++++++++++++++++++++++++++++++++++++++++++++++
Affected Program Source Code
METHOD ON_TRANSACTION_FINISHED.
DATA:
LR_APPL_OBJECT_MANAGER TYPE REF TO CL_DPR_APPL_OBJECT_MANAGER.
*/Transaction supervision snaps only if changes are made
LR_APPL_OBJECT_MANAGER = CL_DPR_APPL_OBJECT_MANAGER=>GET_INSTANCE( ).
IF LR_APPL_OBJECT_MANAGER->HAS_CHANGES( ) EQ CL_DPR_CO=>SC_FALSE.
RETURN.
ENDIF.
*/With the help of this event handler unauthorized transactional
*/statements are detected
IF KIND EQ CL_SYSTEM_TRANSACTION_STATE=>COMMIT_WORK.
MESSAGE X085(00).
ELSE.
MESSAGE X086(00).
ENDIF.
ENDMETHOD.
+++++++++++++++++++++++++++++++++++++++++++++++++
User (SAP_ALL profiles) Assigned with the following roles:
SAP_CFX_ADMINISTRATOR
SAP_CFX_COL_CREATOR
SAP_CFX_USER
SAP_CPR_PROJECT_ADMINISTRATOR
SAP_CPR_USER -
Error when activating Task List
When activating the Task List in PROJECT_SOLAR_ADMIN, I receive the error
- "Phase change from 'Created' to 'Development without Release' is not possible".
When I do a check on the Project, the only red light i get is for the following two jobs, and i'm not sure if this is the issue? And if so, what i have missed in order to resolve it.
- Error in background job for program /TMWFLOW/CMSSYSCOL2 error message No active job found
- Error in background job for program RSGET_SMSY error message No active job found
Thank you for any assistance,
MargoMargo,
We had similar issues with Phase change, but did not get the messages you are getting.
I don't know the version of SM you are in, but as of 7.0 you can change the status of the project in transaction CRM_DNO_MONITOR.
Exceute transaction CRM_DNO_MONITOR
--> Select the Service desk created for your project and CLICK on "Details" button.
-->Go to change Mode
-->Click on Actions Button
--> select the appropriate stage
IMPORTANT:
Click on save button.
The phase selectedis updated AFTER YOU SAVE only.
Regards
Vijay -
Error when creating transfer structure in source system
We have just had a copy of the ERP production system done and connected it to our existing QA system (done by our service providers) for a test go-live of our ERP upgrade.
Now I cannot activate the transfer rules as the transfer structure cannot be created in the source system.
I have checked the settings in table RSBASIDOC and they look okay, I can only assume that our wonderful basis people have done everything they should have but cannot be sure they've done it all correctly.
The sourcesystem is active, the RFC's are fine.
And help for a desperate man please. I've got to get this working in 1 day as basis need the system back to do an Oracle upgrade.Hi Jonathan,
Try to replicate the DS once again and the run the program RS_TRANSTRU_ACTIVATE_ALL to activate your transfer structure. Hope it helps.
Thanks and Regards
Subray Hegde -
No consolidation system found for FMD-121 (project EU_FMPM01)
I have created the maintenance project EU_FMPM01. Added the logical components. Created the IMG project. When I go and try to create a maintenance cycle I am getting the error explained in the subject
"No consolidation system found for FMD-121 (project EU_FMPM01)"
What could be the reason for this ?
Thanks & Regards : Bobby BalHi Bobby,
Which is your TMS landscape for the systems in project EU_FMPM01
DEV---->TST----->PRD
! zdev
!------>
sap
From DEV to TST this are consolidation routes SAP and ZSID
From TST to PRD delivery route
Ensure that you have follow all SPRO activities for TMS in solman and satellite systems.
If you go in solman to /nstms you can see the above systems routes?
Hope this helps,
Dolores -
Error while creating request list Unable to detect the SAP system directory
We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
PrathapDid you get this solved?
I have the same problem -
CHaRM : unable to create Task List
Hi All,
we are trying to configure Charm in our Solman 7.0 sp16.
when i create a project and and click on "Create Task List" under SystemLandscapte>>ChangeRequests Tab
error "The Project is not released. Hence cycle cannot be released.
Now when i click on the check button. the following errors are displayed
Check Logical Components
No Consolidation System found for XXX-XXX(SM2-200) (Project Charm_Test)
+No Tract for Project Charm_test with log. system SM2/200
Check Consistency of project CHARM_TEST
+ CTS Projects in production systems for project CHARM_TEST+
can anyone help me out here.
Thanks!
Regards,
Pradeep LHi Pradeep,
This issue is because of Solution Manger TMS is not configured properly.
Use this blog for STMS configuration: /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
OR
Better use SPRO to configure STMS, Just follow SPRO step by step process.
SPRO->SAP Solution Manager->Configuration->Scenario-Specific Settings->Change Management
->Change Request Management->Standard Configuration->Transport Mnaagement System(TMS)
1. Do you try to activate ChaRM for any satellite system landscape(DEV->QAS->PRD?
OR
2. Do you try to test ChaRM in Solution Manager itself(SM100(DEV)->SM200(QAS)->SM300(PRD)?
If your test belongs to point 2, then follow the blog that i mentioned above. It gives a step by step details.
Note:
1. For anycase, DEV to QAS should be consolidation route and QAS to PRD should be delivery route.
2. SM TMS should have SAP transport layer as well as atleast one customized transport layer.
3. ChaRM supports only client specific transport management system.
Let me know if you need more help on this.
Regards,
Sanjai -
Error when creating a FDM application on SQL Server 2005
Hi,
we are getting this error when creating a FDM application on SQL Server 2005
Error: EPMCSS-07003: Failed to validate identity. Invalid identity . Check identity.[SET_ROLES_LIST]
We are using Windows System Integration although we have also tested with sa user.
Any ideas?
ThanksBased on the error message it appears to be having a Shared Services issue. Verify that the "ADMIN" account is being used for the HSS connection and that you are using "ADMIN" to create the application and see if the same error is returned.
-
Procurement Coordinator received Authorization Error when creating Bid Inv
Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity ManagersHi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Publish to portal error when creating a iview
hi gurus,
I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
Error:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
Regardsyes i have used that tool,,,i am getting below error.
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
RED
The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
I have checked everything,,but still geting red lights
Regards
Maybe you are looking for
-
I'm totally new to iphone/ipod. I need help with the following: 1) How do I get rid of a folder of photos that showed up on my daughter's ipod touch when she received some songs from her aunt's itunes? After she got some songs from that itunes a fo
-
Hi, I am trying to make a button iconic in Forms 10g,button icons are displayed. I have tried the following workarounds but no couldn't make it possible: 1. I gave absolute path of icon file. 2. tried .ico and .gif format images as well. I am using L
-
Control data for storage type is missing Message no. L3006
Dear Mates i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as Control data for storage type is missing Message no. L3006 i have explored every thread regarding the same issue a
-
Raw plugin for photoshop elements 10
I am after a raw plug in for elements 10 that is suitable for my camera Canon eos700d, I have tried 8.1 but it says my product not supported, any help would be appreciated Thanks John
-
Dreamweaver & MySQL Extension for PHP
Hey guys, As everybody knows, the mysql extension in PHP has been deprecated and it will soon be replaced by mysqli, so does anybody know where I can find an Adobe Extension I can use so I can start using mysqli with Dreamweaver instead of mysql? By