Error when creating transport request in Charm for Portal
Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
David
Hello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark
Similar Messages
-
Error when creating transport request for transfer rules
Hi
When we are creating the transport request it is giving the Warning 1."source system are not transported.
Error 2." you can't use request BQAK900164
Error 3."object ISTS Zevkkn_bb could not be saved
to order BQAK900164.
This is very urgent.
Please reply soon.
Thanks in Advance,
Regards
Pankaj AngraHi,
Did you replicate the data source?. That could be the problem or there might be problem you have set up the source system on your BW system
make sure that the source system names are mapped from your R/3 dev to your R/3 QA. This is done on the BW QA (target system) RSA1 => Tools => mapping of source system names. make sure your entries are there for the logical system names of your dev to qa.
Then in the BW dev, when selecting the trasnfer rule make sure to select the appropriate source system. (souce system icon in tool bar)
Do u hav 2 Source sys ?
-Shreya -
Error when creating transport request in 000 clinet
Hi All,
I am getting the below message when creating a transport request manually in 000 client
Requests can only be created from ChaRM!
Message no. 38001
How can I deactivate charm for short time and then activate it again?
Please let me know your suggestion.
Thanks
AmairHi Sanjai,
Thanks for the quick response.
But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
Thanks again
Amair -
Vehicle Scheduling Error:Error when creating transport structures in live C
HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMolTry This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know. -
When creating Certificate request what settings for POP IMAP
when Creating a request for Certificate POP and IMAP are in the list along with autodiscover etc
default value is Server Host name ie. EXCH2013
what should these be set to ?
I'm configuring remote.mydomain.com - should I set these to remote.mydomain.com ?
JKit depends... you can set up same name as your SMTP service or if you want different name for pop/IMAP like webmail or smthing else then you can go for that.
I generally use the same as enabling POP/IMAP is very less required on ex so i just enable the service keeping the URL same so that you save or SSL name also
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin -
Error when creating a folder ,iviews in the portal
Dear sap gurus ,
I m facing a error when creating a Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
Portal Runtime Error
An exception occurred while processing a request for :
<b>iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
Exception id: 10:50_23/11/07_0005_16892850
See the details for the exception ID in the log file</b>
Thanks and Regards,
sathyaHi Sathya
The following line in your log tells you what is wrong:
ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
Br
Göran -
Error in creating Transport Request for a view table
Hello all,
I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
So I created a workbench transport in SE10 and included the following:
PgmID = R3TR
Obj = VDAT
Object name = ZVAITM_TBLE
But when I press enter, I encountered the following error:
No object definition exists for Customizing object ZVAITM_TBLE
Message no. TK427
Diagnosis
The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
This means that you cannot use the Transport Organizer to edit it.
System Response
The function terminates.
Procedure
First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
If the object does not exist, then create it or delete it from the request/task.
I am new to transports so I have no idea how to proceed.
Please advise.
Thanks a lot!
Cha ChaHello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek -
Error when creating Travel request
Hi all,
I am encountering error "Percentage is too high" when creating a travel request. When i tried to change the cost centre to split into different entries.
Ex: 1) 10 % cost centre1
2) 40% cost centre2
3) 50% cost centre2
when i try to save the request i encountered error with "Percentage 90% is too high" as the first entry is reverting back to the initial entry before modification(initial entry is 100% with cost centre1) it is reverting back the first entry as 1) 100 % cost centre1 that means now the entries are becoming
Ex: 1) 100 % cost centre1
2) 40% cost centre2
3) 50% cost centre2
altogether 190% so throwing an error with "Percentage 90% is too high" as the total percentage is more than 100%.
Can you please help in resolving this issue.hi,
see this link
Percentage Overhead Rates are not capture with Transport request
refer this link to know how to create travel reaquest
http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51f0e994b85e40e10000000a11466f/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/b6/cdaab649e911d189060000e8322f96/frameset.htm
thanks -
Error when creating a request Template In OIM
Hello all,
I have a very strange issue with OIM, it is when I try to create a request template, and put a restriction in Organization field, it creates the template and everything is fine. Suddenly, when I try to edit this template, the OIM shows a window with the next error:
ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
I have found in other posts the "solution", It is to change in the database -> RequestTemplate Table -> Template Data Column, the restriction Organization from "the name of the organization" to "the Id of the organization", and restart the OIM, so after that, I can edit the template.
Here is the issue that I don't understand,... few hours after, I want to edit the same template, and the OIM again shows the same error:
ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
And if I review in the database the table, in the Template Data Column, the restriction of Organization has AGAIN the "Name of the organization".
And I can again change that to the "Id of the organization", but it's time lost restarting the OIM. Time that I don't have, because Its more than one template.
Please somebody could help me with this issue.Hello,
I already found the solution to this issue.
I had to restart the OIM server but also the DataBase and after that, this problem was solved.
Thanks anyway. -
Error when creating volume on data group for acfs
Hi,
I want to create ACFS file system on solaris SPARC system which is running solaris 10.9. I have created data group successfully but i get an error when i try to create volume.
ASMCMD> volcreate -G OEMLIB -s 30G oemlibvol1
ORA-15032: not all alterations performed
ORA-15472: volume library cannot be loaded. Platform may not support volume creation. (DBD ERROR: OCIStmtExecute)
i read that solaris 10.8 or more support acfs and my oracle grid software is also 11.2 higher.
what could be the issue? Do i need to manually load drivers for ADVM? where are they located?Thanks
Thanks for your input.
We are missing the ACFS binaries after we installed 11.2.0.1 GRID and Database on Solaris 10 Update 8.
The following are missing from the GRID_HOME/bin:
Acfsload, acfsroot, acfsdriverstate, acfsregitrymount, acfssinglefsmount.
I see these in 11.2.0.1 version of a LINUX install in our datacenter but don’t see it in our Solaris Install. -
Error when creating transport from Satalite system
Hi all i am getting the following error when i try and create a transport from a satalite system.
The RFC connection to the Solution Manager system is not maintained
Message no. STMWFLOW010
Diagnosis
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
System Response
Action cancelled.
Procedure
Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality.
I have checked the RFC to Solman and that is working fine. How can I deactivate the project lock functionality?
Points will be awarded
Thanks
SantoshHi.
Please have a look at [this|http://help.sap.com/saphelp_sm40/helpdata/EN/43/7227481a856fcae10000000a1553f6/frameset.htm]
Hope it helps.
/cheers -
"update rules inactive " error when importing transport request
Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc. -
Error when creating Task List in ChaRM
I am getting this error after I activate Change Request Management and attempt to create a task list.
Error writing to table /TMWFLOW/PROJCTC
Message No. /TMWFLOW/TASKLIST177
There is no long text. Please adviseConfiguring ChaRM in a new client, entries in the table above already existed for the maintenance cycle the new client was trying to generate. deleted entries form database.
-
Error when creating a transport via a correction in charm
Hi Folks..
I am getting an error when I attempt to create a transport using a correction from a change document which is created from a service desk message. I am able to go through the entire process upto creating the transport in the satellite system. When I try I get the following error:
Action Create Transport Request in system DBW 111 of type Source Systems has been cancelled
There is nothing in the action log or either system log. Has anyone seen this before? I can't find anything in Notes, google or here in SDN.
Thanks for your help!
Best Regards,
BillHi
check log of this action in the task list (goto task list -> search error in calendar -> double klick for details)
Maybe:
-You don't have a user in the development system
-You have created a task for a non existing user
-RFC user of TMW RFC has not enough authorization in the dev system to create transports (trace authorizations while creating transport)
best regards
Andy -
Error when creating files for transport request SAPK-700BGINPLMWUI
Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj
Maybe you are looking for
-
To add the line item in Sales Order
Hi Experts, I have to insert the line item between two line item in sales order dynamically. How should i do this. any idea?? Thanks in Advance.
-
KE33 report main data and Line items in KE33 doesn't match
< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. > All, I have created COPA report (cost based COPA). When I ran the report, I have 5 line items and a total row. When selected one
-
I purchased 2 audio books that have disappeared!
I purchased 2 audio books about an hour ago, one didn't download at all and has disappeared from my computer and iTunes all together. - though when I tried to re-purchase it was showing that I had already done so! The second audio book downloaded Par
-
hi, i wont run bapi in portal and i get erorr : No storage space available for extending an internal table., error key: RFC_ERROR_SYSTEM_FAILURE the bapi is working o.k. in R.3 what can be the problem? Regards
-
Get a "Download Error" when clicking on the "App" tab of Creative Cloud.
Get a "Download Error" when clicking on the "App" tab of Creative Cloud.