Error when Customer message create

Dear All,
when i create the new message from service.sap.com,the System ID, Name and Installation Number is disable, so i am unable to create the new message. Only System Search is visible.
When i Double click on the System ID or Installation No. The message is showing in red colour "No valid Maintenance Agreement exists for this Installation Number"

Please check with your BASIS team about the authorization of your SMP OSS id and also the Service Line agreement about on post Installation support for that specific Installation.
Regards,
Dipanjan

Similar Messages

Solution to stop error when trying to create a portfolio

Hi all,
I finally found a way to make a portfolio in acrobat pro 9. The problems I was having were explained in the thread titled "Acrobat pro 9 has a stop error when trying to create a portfoloi"
It seems ther is another way to do this, by selecting 'combine' and then 'merge files into a single pdf' rather than 'assemble pdf portfolio'.
The merge option also gives the choice of making a pdf package and does not result in a stop error with authplay.dll.
So much for Adobe support who conuld not tell me this or respond to support requests.
All I have to do now is to remember to not click on 'assemble pdf portfolio' when I want to assemble a pdf portfolio but "merge files into a single pdf" when I want to assemble a pdf portfolio.
I would still like to hear from Adobe why acrobat pro 9 has a stop error with authplay.dll.
I feel a lot happier now.

I read through the pdf wth your emails to/from customer support. I'll have to defer to someone else because it seems you have tried what I would suggest.
If someone else does not respond with a better plan and you are willing to spend a bit more time before writing off Acrobat 9, I would try the process below one last time. (If you are using a CS suite, while authplay.dll is found in each of the directories, it does not appear that the issue extends to the other programs.)
1. Using Add/Remove Programs, uninstall all Adobe Acrobat and Reader software and uninstall the Adobe Flash Player Active X and Adobe Flash Player Plugin. If you have it, uninstall Adobe Air.
2. In C:\Documents and Settings\(your profile name)\Application Data\Adobe, delete the Acrobat and Adobe PDF folders if they still exist.
3. Reinstall only Acrobat 9.
4. From Acrobat, run the updater Help > Check for Updates and install all updates.
5. Verify Adobe Acrobat is now version 9.2: Help > About Adobe Acrobat Pro (If for any reason it is not 9.2, use the update on http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
6. Test
Message was edited by: Anna Nmty
While searching for a solution, I just saw your post over at acrobatusers.com (http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15765). Looks like my advice was largely a duplicate, although your event log indicates Acrobat did not update properly.

Error when trying to create a site collection

Hi,
I receive the following error when trying to create a site collection in sharepoint 2013. Any ideas of what I can do to resolve?
Sorry, something went wrong
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.ConnectionUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.RequestUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.LoadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.UnloadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
thanks,
Sherazad

Hi ,
Based on the error message, please check whether you have installed the spPowerPivot.msi add-in on each of your SharePoint server, and ran the configuration wizard, make sure that the powerpivotwebapplicationsolution.wsp
is deployed correctly.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Portal runtime error when trying to create new Iviews in EP

Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AM

Krishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

I get this error when trying to create a ringtone - iTunes could not connec

I get this error when trying to create a ringtone:
"iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
But I CAN connect - if I click on the iTunes Store, it connects right away.
I want to make a ringtone from a song that I purchased, but all I get is the same error message.
iTunes 9.2.2, Ireland iTunes Store.

have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

500 internal server error when trying to create users

I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.

Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

Error when sending message: Method not implemented

Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
Liang

HI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav

The system can't find support team when support message create

Dear experts,
The system can't find support team when support message create.
It show the error that
"The action definition SLFN0001_ADVANCED_SMDIAG has not been assigned a merging technology "
and "the action merging cannot be executed."
Did anyone know how to solve this problem?
Thanks in advance

Hey pavienee,
Let me inform you that the action defination SLFN0001_ADVANCED_FIND_PARTNER is responsible for finding the right support team, this is valid if you make relevant settings by assigning partners in ib52 ti the ibase component.
The action log SLFN0001_ADVANCED_SMDIAG has nothing to do with support team determination.... This action is meant for Solman diagnositics.
Please Reward points for usefull answer and revert for any clartifications.
Regards,
Anand..

Error when attempting to create new Crystal Report against SAP BW

We're getting an error when attemptiing to create a new report using the SAP toolbar in CR:
"Failed to retrieve SSO2 logon ticket. Please contact your BW administrator".
Any ideas? We're able to run existing reports fine. Just can't create new ones using the toolbar.

Hi,
but you do realize that it is a pre-requisite ?
your BW system needs to be configured for reading and generating SSO token
Ingo

Error when trying to create a JCO Destination

Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-Arne

Hi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir

Error when trying to create XUSER information for SAPServiceSID

Hi all,
I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install.. Does anyone know a FIX for this?
>xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
FATAL: Close xuser entry failed: could not write USER data [1307]
I am running the command as the SIDADM user.
I have tried the solutions in the following notes without success:
39642
1542818
39439
1875264
1409913
Thanks!

Hi Jayson,
Try this.
Solution
Add the "Administrators" group under:
Control Panel
-> All Control Panel Items
   -> Administrative Tools
      -> Local Security Policy
         -> Local Policies
            -> User Rights Assignment
              -> Take ownership of files or other objects
You check you command and modify.
xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
Regards,
V Srinivasan

"Not an executable or is a link" errors when starting Messaging Server

"Not an executable or is a link" errors when starting Messaging Server

If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem.

"Not an executable or is a link" errors when starting Messaging Server

If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem.

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

Error when Customer message create

Similar Messages

Maybe you are looking for