Error when define non profit interest for partner

Dear Experts,
I've got an error message when I tried to assign interest type "2" for a partner within an equity group with t-code GJVV. The error mentioned : "No NPI Group for Equity Group XXXXXX(customer/partner number), therefore interest type 2 is not allowed".
Has anyone ever encountered this error before? I really appreciate for your feedbacks.
Thank you
Best regards,
Frans Sunarja

Hi Chris,
I am having the same issue. Did you manage to fix this?
Thanks,
Milind

Similar Messages

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

Error when defining successor for node 0000000198

Hello ,
We are using leave request service on ESS portal.
From last few days we are getting error like " Error when defining successor for node 0000000198 "
All agents are assigned properly and also v have checked PFTC setting for Workflow.
the method which are using is Synchrounous.
this error is nt coming perticulary for one employee but it is coming for sick leave workflow.
Please help
thanks

Hi,
This is a binding issue between the workflow container and the task
container because we can see the text in the workflow container but
it is empty in the task container.
Our proposed solution is to go into the Dev or QAS environment and
regenerate the binding between the workflow and this particular task.
We will test and if this works, this will resolve issue.

Error when defining successor for node

Experts,
We are having a problem with one of our workflows that keeps erroring whenever we try to complete it. The error message states "Error when defining successor for node 0000000159". This error does not occur in 4.6c environment and the workflow is working fine. However, our team is in the process of upgrading to ECC 6.0 and the workflow is not working properly in that environment. The workflow is designed for BO BUS2038 and the error occurs when we try to close all tasks and complete the workflow. Can someone direct us to something that we can check, we've pretty much exhausted all our options? Thanks.

Hi Teferi,
This problem occurs in ECC 6 when a step with Synchronous Task/Method does not have the Step executed outcome activated (this is allowed in 4.6C for synch task with terminating events). Check if your Task/method is synchronous.
Cheers,
Ramki Maley.

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Error when defining successor of node in workflows

Hi Experts,
I am receiving an error which says "error when defining successor of node XYZ". However in my workflow template, this particular XYZ node does not exists.
Also I found one entry in SWP_SUSPEN table for the main workflow. I tried to execute the report manually RSWWERRE. Still it did not work out.
I also tried to use transaction SWF_ADM_SUSPEND. However my workitem is not showing in the list.
Kindly help me in this issue.
Thanks
Gopal

Hi,
This problem occurs because the nodes system table with respect to workflow is not updated properly. I hope you might have deleted or changed the workflow design after this you need to update the index of the workflow template too.
Follow the below steps
1. Execute PFTC choose task type as Workflow template and open in change mode.
2. On menu goto Addtional Data ---> Agent Assignment ---> Maintain
3. Choose the workflow template ID and click on the icon on the application tool bar with Red and white colur (Football ) i am not sure I think you can try with CTRL + F11 but you hvae to update the index.
After doing this Execute SWUD txn Check for the consistencies of the workflow template. if you do not find any error refresh the buffer and org environment.
Even after doing all this stuff you still face the issue then generate a version just simply insert a dummy step in the workflow activate and then delete the dummy step activate and refresh the buffer and org environment and try to execute.
This error ususally occurs (upto my knowledge) if the nodes table of the workflow is not updated properly, So the above mentioned ways are to deal with it.
Regards
Pavan

PO Change O/P error- Maintain outgoing EDI-connection data for partner for

Hi Experts ,
We are connecting our SAP ECC 6 ( Ehp 4) sytem to 3rd party system via SAP PI. We already done all the settings..line Output detemination procedure, Partner Profile ( WE20) , Port creation , Condition Records..etc.
We have PO Creation ( ZCRE) and PO Change ( ZPOC) Outbound messages to go from our system. Both have sepate message Types, since PO Creation IDOc should go immidiatly ( Dispatch time 4-Send immediately (when saving the application)
and PO Change IDoC should send as per wish manully in ME9F ( Dispatch time -3 Send with application own transaction).
Once PO Created , Output Message successfully triggering and IDoC is creating ( Green Color) ..so it is working fine .
Fo PO Change Message we had selcted Program -FM06AEND & FORM routine -CHANGE_FLAG.
We also set "Multiple issuing " checkbox in the Output Type and no requierment is assigned.
In WE 20, for Logical system ( LS) Partner XYZ, we set Process code ME11 and checked "Change Message"
1. But when I change PO Qty , output is not automaticaly triggering .After changing PO, if we see determination Analysis, in Procedure RMBEF1, this output ZPOC shows 2 times. First, it shows green color,...Output Found , and second times, it displays, "partner XYZ is not an EDI partner"
2. If we try to manually enter the Output ZPOC in PO Header, then system gives the Error - Maintain outgoing EDI-connection data for partner XYZ.
Can anyone pls suggest what should be the reason for above?
Thanks
NAP

Issue Resolved .
The reason for this system behaviour is in fine-tuned control: We was
using ZMIN only for new message output and ZCHG only for change messagesNevertheless, you can maintain two entries in WE20 for ORDCHG:
EF ZCHG ME11 w/o Change message flag
EF ZCHG ME11 with Change message flag
Thanks

Error when determining the CTIADM_PROF profile for agent xyz

Hi,
I have created the new cic frame work and assigned it to the position. when i run the TC - cic0, I am getting the following
"Error when determining the CTIADM_PROF profile for agent xyz"
Can you help me out ?
Thanks in advance

Hi Devi,
Problem is your IC winclient profile definition don't have any profile definition for CTIAMD_PROF assigned to it.
For this you can use standard profiles or may create your own CTI Component profile.
Follow IMG path:
Customer Relationship Managemet>Interaction Center WinClient>Component Configuration>Hidden Components>Configuration of CTI Component-->Define CTI Component Profile
Use this profile defintion to assign it to CTIAMD_PROF in you IC winclient profile definition.
Best Regards,
Pratik Patel
<b>Reward with POints!</b>

Error when trying to Display WSDL for Sender Agreement

Hi,
I'm getting an error when trying to display WSDL for a sender agreement. The error message is as follows:
Adapter Engine af.xxx.yyy for communication channel not registered in SLD Unable to find the SLD element (SAP_XIAdapterFramework, [CreationClassName, SAP_XIAdapterFramework, string, Name, af.xxx.yyy, string], [AdapterType, SOAP, string])
The SOAP adapter being used is from the non-central AE. I I immediately checked for inconsistent SLD components per note 746176 but everything is in order there. I tried re-registering manually the non-central AE manually as well.
Anyone else ever had the same error? Any hints much appreciated!

Hi Luqman,
go to the sender channel and replace the Adapter Type.
Select the type as SOAP from SWCV SAP BASIS 7.xx or SAP BASIS 3.0
The channel is referring to a swcv which is not present in esr.
As you might know, the adapter metadata is fetched from ESR/IR, so if the SWCV containing the metadata inside namespace http://sap.com/xi/XI/System etc, is not available then it will throw error.
If you do not want to change the Adapter Type in the channel, import the swcv from SLD to ESR and create/import the respective adapter metadata.
Should resolve your issue.
Cheers!
Souvik

Error when writing to interface table for HR

We recently did a client copy from Production to our User Testing client. User was trying to enter time via transaction CAT2 but received the following message when attempting to save the timesheet:
"Error when writing to interface table for HR"
Does anyone have advice on how to resolve this issue?
Thanks as always!

Hi,
We have the same problem.
We tried to add many records to HR via a job but it result with en error message LR036 (Error when writing to interface table for HR)
Did you find a solution since your problem appear ?

I get this error when downloading key not valid for use in specified state what do i do

i get this error when downloading key not valid for use in specified state what do i do

What is your operating system? What are you trying to download?

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error when determining the CTIADM_PROF profile for Agent 1010301

Hi,
here problem is while opening the cic win( Trn : CIC0 - Customer Interaction Center) it's throwing <b>error when determining the CTIADM_PROF profile for Agent 1010301</b>
pls. any ideas would be greatfull.
Thanks

Hi,
please check the following.
1. Make sure in the CIC profile (transaction CICo), a profile category
CTIADM_PROF is there and a valid profile is assigned.
Or, if no telephony should be used, make sure telephony and its com-
ponents are switched off on the CIC framework (transaction
CRMC_CIC_FW_MAINTAIN)
2. in the standard system, when you start your CIC, the framework is
taken from the highest org-unit and the components are taken from the
lowest level.
If you use more then one level of org-unit, please make sure that they
use the same framework to prevent the mentioned problems.
hopefully this helps!
Regards, Gerhard

Error when creating VLO1N: u201Corder blocked for delivery as a result of credi

Error when creating VLO1N: u201Corder blocked for delivery as a result of credit checku201D.
Observations @ FD33:
Credit limit     :     3,50,000.00
Receivables     :     1,53,903.94
Credit exposure:     1,55,185.17
Current sales order value:
Net: 43127.74
Tax: 7331.72
Total sales order value : 50,459.46
Sales order created on : 18/8/09
Horizon                      : 2/9/09
Risk Category                : HRR (High Risk Re-check)
====================
Need to know:
Tax amount is also included in the credit check?
Is the total sales order value: 50,459.46 is included in the Credit exposure value?
If it is not included then the total will go beyond the Credit limit value. Fine the block is ok.
If it is included in the Credit exposure, then the total amount will be 3,09,089.1. Which is less than 3,50,000. So credit check should not happen.
But it is blocked and the error is through as u201Corder blocked for delivery as a result of credit checku201D.
Please let me know the reason & what other checks I have to look on.
So that I can provide the reason for this action.
Thanks in advanceu2026

Hi,
Generally total value of the sales order is considered for the Credit management.
Now if you want tax should not be included for the credit management.
Then you have to make small changes in pricing procedure.
Go to V/08 and select your pricing procedure and go to control data.
Check out the setting where your grand total is happening.
In the subtotal column you will find out A has been put up.
This A trigger the credit exposure of the credit management.
So if you want that tax should not be included then, check out where your total net value has been calculated before tax.
Over there put the A in the sub total column and remove it from the previous setting.
Save this setting now check whether the credit is happening including the tax or not.
Regards
Raj.

Non Profit Discount for Adobe CC?

Hello,
We are a non profit organization that is looking to purchase a subscription for Adobe CC.
We are currently using Adobe CS5 Creative Suite that was purchased with a Non Profit discount.
Are there any non-profit discounts for Adobe CC, or can we upgrade to Adobe CC at a reduced rate for already owning CS5?
Thank you!

The Nonprofit CC is sold under Volume licensing, please refer to:
Adobe nonprofit volume licensing | Adobe Buying Programs
Eligibility guide
Creative Cloud for Teams (Non-Profit) Renewal Loop
non-profit pricing
Regards
Rajshree

Error when define non profit interest for partner

Similar Messages

Maybe you are looking for