Error when displaying amount field in HTMLB Tableview

Hi all,
I am displaying some 'X' table in HTMLB Tableview and it has one amount field.But reference(currency) field of that amount field is in other table . I know it gives the error.
Please tell me there is any other way to resolve this problem with out adding reference(currency)field in the same table?
Thanks and Regards ,
Harikrishna .

Hi Hari,
But reference(currency) field of that amount field is in other table . I know it gives the error.
It will not give any error , you can use the currency key field of other table or structure .
Alternatively you can use predifined type DEC instaed of CURR .
Regards,
Anubhav

Similar Messages

Error when displaying a field on Screen with Table Control

Hi,
It is going to 'Dump' when I am trying to display data on the screen with the help of Table Control. From the dump, What I have observed is , there is a field 'ZTSV_FSRDATA-ANZFEHLER'. If this field has negative value, then it is going to 'Dump' saying that the length is not enough. If it has a positive value then it is working fine. But the type of the field in the Internal table & on the screen are same.
Please help me to resolve this error.
I am posting here the Dump message also:
A conversion error occurred while the program was trying todisplay data on the screen.
The ABAP output field and the screen field may not have the same format.
Some field types require more characters on the screen thanin the ABAP program. For example, a date field on a screen needstwo characters more than it would in the program. When attempting to display the date on the screen, an error will occur that triggers the error message.
Thanks,
Sreenivas Reddy Maddi.

Hi Sreenivas,
Refer this thread:
how to display negative values in a screen field of a screen
Re: negative values not allowed
Regards,
Sampath

Error when displaying xellerate form

Hello,
I have the following error when displaying the form of any xellerate users :
ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
<Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
<ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
What is the problem with my attribute definition ?
Thanks for your help,
Kind regards,
mdadikn

Hello,
I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
From the Error Log:
Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
Line with issue from FormMetaData.xml:
<Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
<ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
</Attribute>
Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
Thank you,
Ryan

Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

dear all,
I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

I am also getting the same error, using 11g.

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Error when updating back to ODS using tableview iterator.

I get this error when I try to execute my bsp page. The page collects a cell value that was edited on the previous page and updates it to the ods.
The error is "Function not possible in a captured session"
The termination type was: TH_RES_FREE
When I debug, every thing looks fine. ITab3 returns values it's supposed to. So I am not sure what's causing it to fail. Any ideas? Thanks.
Here is my code:
CLASS cl_htmlb_manager DEFINITION LOAD.
DATA: event TYPE REF TO cl_htmlb_event.
event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
if event->id = 'Update' and event->event_type = 'click'.
DATA: tv TYPE REF TO cl_htmlb_tableview.
FIELD-SYMBOLS LIKE LINE OF selectedrowindextable.
tv ?= cl_htmlb_manager=>get_data( request = runtime->server->request
 name = 'tableView'
 id = 'tv1' ).
IF tv IS NOT INITIAL.
DATA: tv_data TYPE REF TO cl_htmlb_event_tableview.
tv_data = tv->data.
refresh itab2.
refresh itab3.
call method tv_data->GET_ROWS_SELECTED
receiving selected_rows = itab2.
endif.
data : ind type SELECTEDROW,
 row_s type row.
if itab2 is not initial.
 data: rw LIKE LINE OF itab.
 loop at itab2 into ind.
 READ TABLE itab INDEX ind-index into
 rw.
 if rw is not initial.
 row_s = rw.
 append row_s to itab3.
 clear row_s.
 endif.
 endloop.
 MODIFY /bic/aNCN_O01300 FROM table itab3.
 ENDIF.
 endif.

hi Uday,
This is simple....
Use the function module
1) For adding leading zero's or spaces...!
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
 INPUT = lw_variable
IMPORTING
 OUTPUT = lw_variable.
2) and for removing leading zero's or spaces.....
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
 INPUT = lw_variable
IMPORTING
 OUTPUT = lw_variable.
Hope this helps.
Do reward each useful answer..!
Thanks,
Tatvagna.

Error when displaying - on table control

hy guys,
im working with a table control..
the problem is when the table control loads a -200 or any number with - .
ERROR
DYNPRO_FIELD_CONVERSION
I already tried to change the format of the table field to currency, dec, char and numc
currency the error is displayed.
dec the error is displayed
char the column is displayed empty
numc the table is displayed but the - is not displayed in the field.
any ideas?
Edited by: javier santana on Sep 7, 2008 7:26 PM

Hi,
The problem mayb with the -ve value display, keep the format to currency and double click on the field in table control, u wil find a option to display -ve values select that
If -ve value is ur prob then this should work

Sap error when displaying dynpro

Hi guys,
i need to display a dynpro with some data, the problem is that sometimes i got an abap error when i call the dynpro.
the error is because when u try tu put a currency with the negative symbol ( - ),
i create the field as currency with reference Q0045-OPELO, but no matter what field i use, if the result has a - i always get the abap error.
any ideas?

If that doesn't work, make sure that you have a place holder for the negative in the screen field. Go to screen painter, click on the element list tab, then click the Texts/I/O Templates tab, in the Text or I/O Field column, make sure that you have something like this in that field ________________V for your particular field.
Regards,
Rich Heilman

Error when displaying Active Sessions - 500 Internal server error

Hi all,
recently I am getting errors when I want to look up the logged on users in our MII 12.0.2 system. The error displayed is
500 - Internal server error
Application error occurred during request processing
Details: java.util.ConcurrentModificationException: null
Exception id: [0002556FD9C4003400000076000EA16A00045CFF57783831]
Netweaver Log only displays the same error.
Has anyone experienced this kind of error before? All other MII portal items work as usual, it is only "Active sessions" that brings up this error, I would say, 80% of the time I call it.
This error occurs after a GoLive with more users and more traffic on the machine. Could it be some kind of memory problem? Reboot of the system does not help.
Michael

Perhaps the jsp page is not handling something properly - a special character in name or email perhaps?
Have you tried something like:
"/XMII/Illuminator?Service=Admin&Mode=SessionList"
or
"/XMII/Illuminator?Service=Admin&Mode=SessionList&Content-Type=text/xml"
These URL's should produce the desired dataset results - hopefully without the internal server error.
Regards,
Jeremy

Error when displaying OrgChart in ESS

Hi ALL
One of our employee is getting error "500   Internal Server Error" when he trying to display the OrgChart in ESS.
Please find below the exception :
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Invalid personnel number
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.org.FcOrgBusinessLogic.getOrgChart(FcOrgBusinessLogic.java:248)
     at com.sap.xss.hr.org.wdp.InternalFcOrgBusinessLogic.getOrgChart(InternalFcOrgBusinessLogic.java:368)
     at com.sap.xss.hr.org.FcOrgBusinessLogicInterface.getOrgChart(FcOrgBusinessLogicInterface.java:128)
     at com.sap.xss.hr.org.wdp.InternalFcOrgBusinessLogicInterface.getOrgChart(InternalFcOrgBusinessLogicInterface.java:178)
     at com.sap.xss.hr.org.wdp.InternalFcOrgBusinessLogicInterface$External.getOrgChart(InternalFcOrgBusinessLogicInterface.java:247)
     at com.sap.xss.hr.org.chart.VcOrgChart.getOrgChart(VcOrgChart.java:202)
     at com.sap.xss.hr.org.chart.wdp.InternalVcOrgChart.getOrgChart(InternalVcOrgChart.java:207)
     at com.sap.xss.hr.org.chart.Orgchart.wdDoInit(Orgchart.java:100)
     at com.sap.xss.hr.org.chart.wdp.InternalOrgchart.wdDoInit(InternalOrgchart.java:216)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:793)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:881)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Have anyone come across similar issue . Please do let me know if any thing needs to be checked .
Any help is highly appreciated
Thanks in Advacne
BR
VN
Edited by: vishal_nam on Jul 25, 2011 1:29 PM

The issue was actually with OM. The problem was that the position was not connected to any org unit.
The functional consultant was able to fix it.
Thanks for your replies .
BR
VN

Error when displaying modeling on MultiProvider, urgent!!!

Hi Expert,
There is one runtime error when I try to display modeling on MultiProvider. but It's OK to display ODS and Cube. Could anyone tell me how to do? I can't find any notes about this. Thanks a lot!!
Carlos
=============================
Message:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          07/28/2006 12:07:47
ShrtText
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
What can you do?
     Print out the error message (using the "Print" function)
     and make a note of the actions and input that caused the
     error.
     To resolve the problem, contact your SAP system administrator.
     You can use transaction ST22 (ABAP Dump Analysis) to view and administer
      termination messages, especially those beyond their normal deletion
     date.
     is especially useful if you want to keep a particular message.
Error analysis
     Short text of error message:
   Internal error
   Technical information about the message:
   Message classe...... "RSAWB"
   Number.............. 002
   Variable 1.......... " "
   Variable 2.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "MESSAGE_TYPE_X" C
    "CL_RSAWB_GENERAL_AWB==========CP" or "CL_RSAWB_GENERAL_AWB==========CM00O"
    "SHOW_INFOCUBE_DATAMODEL"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.

these notes can be useful for you, depending of your BW release.
640945
950823
527086

Error: Cannot Display Page----showing error when displaying SRS window.

Hi All,
Iam getting error when trying to display concurrent Program result view page i.e 'FNDCPREQUESTVIEWPAGE'
You cannot complete this task because one of the following events caused a loss of page data:
Your login session has expired.
A system failure has occurred.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
i wrote the code there in the link http://oracleanil.blogspot.com/2009/04/steps-for-insert-in-eo.html
Please anybody tell me what the reason behind this error.??
Edited by: 881533 on Nov 10, 2011 1:15 AM

Hi,
This page normally dont have back button ,
if u use browser back button some times it throws error,
Create a link on this page using personailization and call some function to navigate to the page which u want,
u can navigate u another page using the link instaed of using broeser back buton.
Thanks
Raju

Email submit button causing required error when all required fields are filled in

It looks like if I have more than 1 instance of subform added, my email submit button triggers "..at least one required " error message when all required fields are filled-in.
I toggle subforms between "visible" and "hidden (from layout)". Any suggestion is appreciated.
ralph

The fields that are hidden should have the validate.nullTest property set to "disabled", something like;
TextField1.validate.nullTest="disabled";

Internal Server Error when Displaying Total No. of Pages in Oracle Reports

Hello all,
I've already posted an almost similar message in the Developer Tools forums but would like to post it again here since we think that this is a problem with the report server (Maybe we're missing a patch, a configuration value not set properly or resources are not enough like memory).
We're using Oracle Reports Server ver10.1.2.0.2 and we're encountering an Internal Server Error when a particular report retrieves around 10K records which displays on each page the current page and the total no of pages. When we only display the current page, the report does not encounter any error.
When we enabled the tracing options, it just showed that it encountered a Null pointer exception.
[2006/7/13 11:1:4:703] Debug 50103 (EngineImpl:EngineImpl) : CInitEngine returns 0
[2006/7/13 11:1:4:765] Exception 50125 (java.lang.NullPointerException
at oracle.reports.engine.RWEngine.init(RWEngine.java:343)
at oracle reports.engine.RWEngine.main(RWEngine.java:60)
): Internal error java.lang.NullPointerException
And according to metalink (Doc Id:315228.1), we should just remove the total pages in our report. Problem is that this isn't an option for us. The document also mentioned about something about timeouts. We have already tried setting the request timeout parameter of the HTTP server to larger values but it still doesn't solve the problem.
Is there a workaround for this?
Any help would really be greatly appreciated.

Hi All,
We really need a workaround for this error. When we enabled the tracing options, it just showed that it encountered a Null pointer exception.
[2006/7/13 11:1:4:703] Debug 50103 (EngineImpl:EngineImpl) : CInitEngine returns 0
[2006/7/13 11:1:4:765] Exception 50125 (java.lang.NullPointerException
at oracle.reports.engine.RWEngine.init(RWEngine.java:343)
at oracle reports.engine.RWEngine.main(RWEngine.java:60)
): Internal error java.lang.NullPointerException
HELP!

Displaying amount field in smartform output

hi experts,
i am printing amount field in smartform output. like this 11,200.
but i need to display like this $11,200.
i need to print $ with amount field .
can u give me some idea?
Thanks

Hi,
Try like this.
Data : v_amount type i value 11200,
v_final type string
If u r getting currency, then check the currency.
If Curr eq 'USD'
concatenate '$' v_amount into v_final separated by space.
endif.
Print V_FINAL where do u want.

Error when displaying amount field in HTMLB Tableview

Similar Messages

Maybe you are looking for