Error When Distributing Image
After updating my image this month to include patches, I've had a distribution point failing on the transfer.
The image transfers successfully to my other 11 distribution points, but is failing on one. As a note, I can distribute smaller packages (software up to 1GB) successfully, but cannot distribute images.
Image Size: 7.8GB
Free Space of DP: 18GB
PkgXferMgr.log shows the error below:
ExecStaticMethod failed (80041001) SMS_DistributionPoint, AddFile SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:56 AM 6596 (0x19C4)
CSendFileAction::AddFile failed; 0x80041001 SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:57 AM 6596 (0x19C4)
ExecStaticMethod failed (80041001) SMS_DistributionPoint, AddFile SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:57 AM 6596 (0x19C4)
CSendFileAction::AddFile failed; 0x80041001 SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:57 AM 6596 (0x19C4)
CSendFileAction::SendFiles failed; 0x80041001 SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:57 AM 6596 (0x19C4)
CSendFileAction::SendFiles failed; 0x80041001 SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:57 AM 6596 (0x19C4)
Sending failed. Failure count = 1, Restart time = 4/2/2015 9:55:57 AM Eastern Daylight Time SMS_PACKAGE_TRANSFER_MANAGER 4/2/2015 9:25:57 AM 6596 (0x19C4)
Is there anything changed or unique about the problem DP? Is the DP in a secondary site? Is it at a location with a slow link?
Jeff
Similar Messages
-
PDF Report Error When Distribute the Output?
REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ -
REP-50159: Executed successfully but there were some errors when distribute
HI All,
I am using Oracle 10g Rel2 application server on linux environment. I am calling oracle reports from forms i am getting REP-50159: Executed successfully but there were some errors when distribute error.
I am using Destype :PRINTER and Desname:Printername. Please help us in resloving this issue.
Thanks & Regards,
RamTry editing rwlpr.sh in $ORACLEHOME/bin and change the lines (at around line 172) from
if [ ! -x $PRNCMDPATH ]
then
searchcommand $CMD
fi
to
if [ -z $PRNCMDPATH ]
then
searchcommand $CMD
fi
It worked for me :-) -
How do I fix an access rights error when launching Image Processor in Adobe Bridge CC?
Often when I am working on files and want to batch process Jpegs for clients I get an error message from Image Processor. It will state "I am unable to create a file in this folder. Please check your access rights to this location ...."
I have cleared cache and up'd my history levels. I checked to make sure the files were not locked and read/write was enabled. I am not sure why this error keeps occurring. I am using Adobe Photoshop CC 2014 (2014.2.2 release) with Adobe Bridge CC (6.1.0.115)It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
Hello,
I am getting the below error messages when I render a TIFF image sequence using default settings. I have double-checked and I have read-write privileges for the file destination. I have also emptied the Disk Cache and Cleaned the Database. My system set-up is also below - there was no error log. Any help/ideas would be greatly appreciated as this keeps happening.
My Computer
Windows 7 Professional Service Pack 1, 64-bit
Intel Xeon CPU E5-2697 v2 @ 2.7 GHz
64 GB RAM
After Effects
2014.2
Render Settings
After Effects Multiprocessing ON (I tried it with and without)
Disk Cache Enabled
Default TIFF Sequence with Alpha Output ModuleGoogle Drive? Directly rendering to a synced folder? This cannot work.
Mylenium -
Error when inserting image in cs3
starting a few days ago, when i try inserting any image in my page, i get this error "wen executing objectTag in image.htm, a javaScript error occured" what is this? how do i get ridf of it
Check theDreamweaver FAQ
and look JavaScript and other unexpected errors
Nadia
Adobe® Community Expert : Dreamweaver
http://twitter.com/nadiap
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/ -
Internal data error when uploading images
I have had no problem uploading files and images. Now, I can
upload files, but when I try to upload an image I get FTP error -
internal data error. I also connected directly to my server and
tried to transfer images, but that didn't work either. Does anybody
know what could be causing this?On Sun, 15 Oct 2006 18:26:07 +0000 (UTC),
"nolonger_marchetti"
<[email protected]> wrote:
>I have had no problem uploading files and images. Now, I
can upload files, but
>when I try to upload an image I get FTP error - internal
data error. I also
>connected directly to my server and tried to transfer
images, but that didn't
>work either. Does anybody know what could be causing
this?
I've never heard of this, but two things come to mind.
1) Is a file in question opening being edited in another
application?
2) Have you tried passive FTP?
hth -
"Rend Error" when sending image via iChat/AIM
On my brand new iMac aluminum, I am unable to send, and friends are unable to send, images via iChat AIM 3.1.8 (V445). When either of us try to send, we get the message "An undefined AIM error has occured. The server message was: Rend: Error"
I then spin around and use my old G4 iMac to send an image - no problem. My buddy is also able to send to me, no problem.
Both computers are connected to the same Linksys WRT54G router. When I searched for the term 'rend' only one thread came back which suggested to change the port from 5190 to 443. I did this and it didn't help.
Any other suggestions?Hi Craig,
In the Linksys set up pages you have Application and Gaming (Which is where I think you are talking about)
In there there are several options.
Port Forwarding, Port Triggering, DMZ (possibly UPnP Forwarding and QoS)
Disable any Port Forwarding or Port Triggering. DO not use the DMZ.
Save settings. (you should still have Web browsing and Mail abilities).
GO to the Administration tab on the top row.
Enable UPnP.
Save Settings.
UPnP allows multiple computers to use the same ports.
This way the Linksys can be left doing DHCP if you wish and it will not matter if your computer gets a new IP every now and then. Also the Ports are opened by the application and close after a timed period of non use.
You can limit the "Hops" to the number of devices the computer is from the Linksys (1 ?) to make it more secure.
On the main set up page you could limit the the DHCP range to the number of computers you have to prevent outside connections.
The ports you describe so far are only the TExt chatting and file sending ports
11:23 AM Monday; August 13, 2007 -
Version: Encore 2.0.0.48678
Problem: when either building an image or a folder the build halts after a few seconds with this error message. "Encore has encountered an error [\dev\stingray\Backend\Src\Sequence\Sequence.cpp-1395]" then the general error pops up.
project size is 800mb, there are no errors, all files are encoded, preview works fine. tried disbaling motion animated buttons. No motion menus
XP SP2, recent default install of production suite. Tried it with network disabled, many reboots, renames, drive changes.
PC is dell SC430 server 1gb ram, Intel 2.8D, Drives have plenty of space etc etc
Google reveals a few similar problems but no resolutions, any help much appreciated
MauriceMe too Charlie - did you ever get a fix?
-
Error when uploading image (SCCM 2012)
hello all
i get the following error "the instruction at 0x779f7a1f referenced memory at 0x00000028. The memory could not be written"
when uploading an image to sccm from a precision T3600. Our infrastructure is other wise fine, its just the one model we are having problems with and this
was working last January (the last time I installed a batch). Ive seen blogs that get this when someone is creating vms with sccm but not much else.
all my workstations are Windows 7 x64
Any help is appreciated
thanksPro tip; never build images on physical machines. :-)
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum -
Error when adding image in-line with text
When using some of my templates I have no problem in putting
a small graphic (a pdf icon) in-line with text. Yet with others the
insertion of the same small graphic forces a newline before and
after the graphic.
If the text and image is placed in an editable region of the
template, but not within a table cell all is ok.
If the text and image is place within a table cell within the
editable region the problem arises. I am sure there is something I
have specified incorrectly but cannot discover what it is.
An example of where it works fine is:
www.digitalfox.co.uk/parryassociates/products.htm
An example of where it doesn't work is:
www.bournemouthlittletheatre.co.uk/membership2.htm
I am using Dreamweaver 8 within Studio 8 and run under
Windows XP.
Can anyone help please?
Regards
Roger SansomHmm -
<style type="text/css">
<!--
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
Is this the belt and bracers approach? 8)
Anyhow, your problem is in the very first line of one of
those (take your
pick) -
TD IMG {
DISPLAY: block
That causes images in table cells to behave as a block tag.
Block tags
force all adjacent content to the next line.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RogerLS" <[email protected]> wrote in
message
news:[email protected]...
> When using some of my templates I have no problem in
putting a small
> graphic (a
> pdf icon) in-line with text. Yet with others the
insertion of the same
> small
> graphic forces a newline before and after the graphic.
>
> If the text and image is placed in an editable region of
the template,
> but
> not within a table cell all is ok.
>
> If the text and image is place within a table cell
within the editable
> region
> the problem arises. I am sure there is something I have
specified
> incorrectly
> but cannot discover what it is.
>
> An example of where it works fine is:
> www.digitalfox.co.uk/parryassociates/products.htm
>
> An example of where it doesn't work is:
> www.bournemouthlittletheatre.co.uk/membership2.htm
>
> I am using Dreamweaver 8 within Studio 8 and run under
Windows XP.
>
> Can anyone help please?
>
> Regards
> Roger Sansom
>
>
> -
When I try and save my image a pop-up comes up saying "Could not save as “/Users/.../Jewett9copy.jpg” because the disk is not available." Does that mean my computer disk is too full or what? This happened last night but then it ended up saving and I've saved this morning too....Not sure what to do next.
Without proper system information and other details like exact saving options or storage location we cannot tell you anything. You heven#t even tolsd us what program.
Mylenium -
CSS/JS Error when viewing images
Just thought I would drop a line to the Web-guru's at Apple HQ: when viewing an image on a 13" Macbook Screen, the image is centred to far right.
From WebKit Inspector:
<div class="jive-modal" id="lb_image_wrapper" style="left: 50%; margin-left: -11px; z-index: 1002; visibility: visible; display: block; position: fixed; top: 50%; margin-top: -272.5px; "><a class="j-icon-close jive-close" href="#"></a><img id="lb_image" src="https://discussions.apple.com/servlet/JiveServlet/showImage/2-15006478-1360/Scre en+shot+2011-04-17+at+9.52.35+AM.png" style=""></div>
The left:50%; causes the modal to appear too far right and is not allieveted with the margin-left:-11px; technique.This is based off the MooTools framework (which is my background. I am a user, not a developer of).
<!-- Get dimensions of image -->
var imgDimensions = $('lb_image').getSize();
<!-- Get calculated dimesons of modal wrapper -->
var totalWrapperWidth = $('jive-modal').getSize();
<!-- Halve the width of modal -->
var marginLeft = (totalWrapperWidth.x/2)
<!-- Use this for the margin-left attr: -->
$('wrapper').setStyle('margin-left', -marginLeft); //[note the ( - )]
If you get the idea, I'm sure the boffans can make it "just work".
Nice theme name btw -
Out of memory error when downloading image to device
Hi,
i am downloading a png image to the emulator. i get an out of memory exception.Ooops, my bad - I missed 'emulator' word. I would guess there's a problem with image itself. Try to re-save it in different graphics tool (using different bit depth, ...) BTW it will help if you gave us scenario under which this happens.
Regards,
Peter -
ERROR WHEN SENDING EMAIL (REPORTS)
Hi all,
Sorry to write about Reports here, but the Reports Forum is slow today, nobody answers the questions... if anyone here could help me i would thank a lot.
I am trying to send the report by email, i already modified the file rwbuider.config, but i am getting the following error:
REP-0069: Internal Error.
REP-57054: In-Process job terminated: Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
I am using Reports 10g.
Any help??hii avinash,
Please check that the IP Address of your SAP system is populated on the Relay Agent of your SMTP Server
Check also in transaction SMICM, if SMTP is activated.
regards,
Shweta
Edited by: Shweta Joon on Aug 24, 2009 10:09 AM
Maybe you are looking for
-
I just purchased retail version of PS Elements 13 and there is no serial number included with it.
-
App server , process scheduler , web server and DB scripts
Team, Good Morning. I am looking for the script which will help me in doing health check-up for app server , process scheduler , web server and DB. The script should trigger a email when any one of the domain is down and when it get up. Waiting heart
-
How to install SUNVTS on Solaris 10 for SPARC�H
I want to install SUNVTS on Solaris 10 for SPARC system, but I don't know how to install. Could you give me some instructions? Or provice some materials for my reference. Thanks a million!!
-
CreateUserWizard error with duplicate email / username
Hi, I am using the oracle membership provider for an application and have found that I can create users and log in just fine however if I try to create a user with a duplicate email address or username the application crashes with the message below.
-
How can i make a picture in html?
How can i insert an image in html script. I want when people visit me website they can see a picture. But how can a insert a pictrue from my laptop to my html script?