Error when doing a rman backup

hi Experts;
I'm tryin to create a backup, with rman.
This is a DB oracle 10g, rac, with ASM. We have 2 nodes.
The DB is in archive mode.
When I execute rman, following the next procedure:
export ORACLE_HOME=<path>
export ORACLE_SID=DBSID
rman
connect target /
I get this message:
connected to target database (not started)
However, DB is up and running and I can connect thru sqlplus an SQLDeveloper.
What steps I should follow in order to complete the backup?
Regards
ANG

Since this is a 2 nodes RAC DD, which wouldbe the process:
srvctl stop database -d dbname
srvctl start instance -d dbname -i instancename -o mount
To do this in one node? the other node remains down.Of course you can shutdown any node if you wish, still you can take backup from active database/ open mode database.
I need to shutdown the DB, and the restart it?At least one instance should be UP and you have to connect only that node. In specific to RAC environment if you use TNS service , it can connect any one node according to load balance/active instances, why can't you use service. Also post
$ srvctl status database -d <db_unique_name>
But my doutb is, if the DB is in archive mode, why I can not do the backup without any problem?Here problem is not with backup, it's problem with connectivity.
If it's no archivelog mode then you can backup only in mount status.

Similar Messages

My iPad Air gets a error when I try to backup. It does sync properly. My iPhone backs up and syncs without isssue. I am running latest itunes and iOS 8 versions. Thank you.

My iPad Air gets an unknown error when I try to backup. It does sync properly. My iPhone backs up and syncs without isssue. I am running latest itunes and iOS 8 versions. Thank you.

Try rebooting your computer and reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

I got a error when i trying to backup my iphone with the usb cable

i got a error when i trying to backup my iphone with the usb cable. After i update to ios7 and also update itunes to last version, i got a message like 'could not back up the iphone, because a session could not be start with the iphone'. does anyone know how to deal with it. I never meet this question before i update to ios7

Hello Lazyboy7,
Thank you for using Apple Support Communities!
It sounds like you are getting an error message from iTunes when trying to manually backup with your USB cord.
I found this article to help troubleshoot what might be going on here:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care,
Sterling

TS1702 I got this error when doing a restore

I got this error when doing a restore and the restrictions were turned on . I disabled restrictions and the restore was able to complete.

The error in itunes had a link to http://support.apple.com/kb/TS1702. I placed this message here for anyone that might navigate to the same message and would hopefully find this. Yes turning off restrictions allowed the restore to complete and everyone is now happy.

Error when doing a backup

Hi buddies;
I'm trying to doing a full backup, I'm doing the backup thru OEM, and it's failling, with these messages:
Starting backup at 22-DEC-09
current log archived
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/22/2009 14:03:18
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /opt/oracle/product/10.2.0/rdbms/dbs/arch2_2288_663796045.dbf
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
exit;
released channel: oem_backup_disk1
Please, somebody help me, the filesystem is getting full.
Thanks

Hi,
You need archive log to do database restore to a point in time. But for that you need to have level 0 backup (FULL BACKUP) of the database. Oracle then usage the FULL backup and archive log to roll forward to the point in time you want to recover the database. It looks like you do not have FULL backup as well. So my advice will be to delete these archive logs and when you get a change. point the archive log destination to another directory and restart the database. Then take a complete Level 0 FULL backup.
Regards

ORA-12514 Error, While taking offline Rman backup

Hi Experts,
I have scheduled Rman offline backup job. Scheduled the following commands to run in a batch file(Win 2003 server)
I am getting the below error.
When we use shut down abort, do we need to restart the Listener?
Please help me on this issue.
I am using oracle 10.2.0.4.0 on Windows 2003 server
Shutdown Abort;
Startup Mount;
SQL 'Alter System Enable Restricted Session';
SQL 'Alter Database Open';
Shutdown Immediate;
Startup Mount;
Backup database;
Backup Current controlfile;
SQL 'Alter Database Open';
SQL 'Alter System Disable Restricted Session';
SQL 'Create Pfile from Spfile';
Exit;
Recovery Manager: Release 10.2.0.4.0 - Production on Tue Mar 3 03:12:56 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: xxxxx(DBID=524614998)
using target database control file instead of recovery catalog
RMAN> Shutdown Abort;
2> Startup Mount;
3> SQL 'Alter System Enable Restricted Session';
4> SQL 'Alter Database Open';
5> Shutdown Immediate;
6> Startup Mount;
7> Backup database;
8> Backup Current controlfile;
9> SQL 'Alter Database Open';
10> SQL 'Alter System Disable Restricted Session';
11> SQL 'Create Pfile from Spfile';
12> Exit;
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 03/03/2009 03:13:01
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Recovery Manager complete.

NAME TYPE VALUE
Thanks for the quick reply, Please see below for service_names, listener services and Listener.ora file content.
service_names string QASQL2
C:\>lsnrctl services
LSNRCTL for 64-bit Windows: Version 10.2.0.4.0 - Production on 03-MAR-2009 05:02:26
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxqasql2.domain.abcd-xyz.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "QASQL2XDB" has 1 instance(s).
Instance "qasql2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: xxxQASQL2, pid: 5240>
(ADDRESS=(PROTOCOL=tcp)(HOST=xxxqasql2.domain.abcd-xyz.com)(PORT=2528
Service "QASQL2_XPT" has 1 instance(s).
Instance "qasql2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:17 refused:0 state:ready
LOCAL SERVER
Service "qasql2" has 1 instance(s).
Instance "qasql2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:17 refused:0 state:ready
LOCAL SERVER
The command completed successfully
C:\>
***********Listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxxqasql2.domain.abcd-xyz.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCPS)(HOST = xxxqasql2.domain.abcd-xyz.com)(PORT = 2484))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
Thanks

Configuring Active Dataguard- Error comes while taking rman backup

Hi All,
I'm following this( http://wiki.oracle.com/page/11gR2+Data+Guard+Setup+project+Part5 ) article to configure a active dataguard. And i have successfully completed lot of steps up to now.
But im getting an error when i'm trying to complete the step 10 under chapter 5 (creating stand by)
step 10
10- OK, here we go, log into RMAN and run the following script. This script will create the standby database
At the command prompt type in rman
when rman launches connect to the target and auxiliary databases
connect target sys/michael@MS112DGP
connect auxiliary sys/michael@MS112DGS
here is my one... my primary db is called as dgp and my stand by is dgs
this is the error im getting... :(
[oracle@dgs ~]$ rman
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Apr 23 09:54:40 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target sys/oracle@dgp
connected to target database: DGP (DBID=1555810211)
RMAN> connect auxiliary sys/oracle@dgs
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
RMAN>
can anybody please help me to sort this out. once i solved this i can complete my first dataguard :)
Thanks in advance
Max

Hello Sb,
[oracle@dgs admin]$ lsnrctl stop
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:02
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
[oracle@dgs admin]$ mv listener.ora listener.ora_bkp
[oracle@dgs admin]$ ll
total 16
-rw-r--r-- 1 oracle oinstall 471 Apr 17 09:25 listener.ora_bkp
drwxr-xr-x 2 oracle oinstall 4096 Apr 15 14:18 samples
-rw-r--r-- 1 oracle oinstall 187 May 9 2007 shrept.lst
-rw-r--r-- 1 oracle oinstall 506 Apr 17 09:07 tnsnames.ora
[oracle@dgs admin]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:26
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Log messages written to /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:37
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 10 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$
Thanks,
Max

Error when doing importing with impdp

Hi,
I tried to do export then import the schema from and to same schema. However, when doing export with expdp everything was okay.
Problem begins when I tried to do importing by using impdp. I also tried to drop the current schema and created the new one but it still doesn't work.
If I didn't drop the current schema, it logs looks like this
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
ORA-31684: Object type SEQUENCE:"HSS"."LCM-MIGRATION_ID-SEQ" already exists
ORA-31684: Object type SEQUENCE:"HSS"."WKS_IDENTITY_SEQ" already exists
ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_RESOURCE_SEQ" already exists
ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_LEASE_OWNER_SEQ" already exists
Processing object type SCHEMA_EXPORT/TABLE/TABLE
ORA-39151: Table "HSS"."HSS_COMPONENT" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_LINKS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_PROPERTY_VALUES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_TIERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."ESS_CLUSTER_SERVER_MAPPING" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_TYPES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."CSS_IDENTITY" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."CSS_GROUP_MEMBERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."CSS_USERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
Job "HSS"."SYS_IMPORT_FULL_01" completed with 95 error(s) at 08:47:21
And then this is the log when doing importing, I only highlighted the necessary part which I think related with my problem
Starting "HYPSS"."SYS_IMPORT_FULL_01": HYPSS/******** TRANSFORM=oid:n:type directory=test_dir logfile=imptest.log dumpfile=HYPSS.dmp
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"HYPSS" already exists
. . imported "HYPSS"."CSS_ROLE_LOCALES" 1.630 MB 6358 rows
. . imported "HYPSS"."HSS_COMPONENT_FILES" 601.5 KB 33 rows
. . imported "HYPSS"."HSS_COMPONENT_PROPERTY_VALUES" 130.7 KB 1657 rows
. . imported "HYPSS"."CES_APPS" 10.54 KB 1 rows
etc....
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39083: Object type INDEX_STATISTICS failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
DECLARE I_N VARCHAR2(60); I_O VARCHAR2(60); c DBMS_METADATA.T_VAR_COLL; df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS"; c(1) := 'TRIGGER_NAME'; c(2) := 'TRIGGER_GROUP'; DBMS_METADATA.GET_STAT_INDNAME('HYPSS','QRTZ_TRIGGERS',c,2,i_o,i_n); INSERT INTO "SYS"."IMPDP_STATS" (type,version,flags,c1,c2,c3,c5,n1,n2,n3,n4,n5,n6,n7,n8,n
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
The source schema is on USERS tablespace (default). The destination schema I tried to put on the same tablespace but it doesn't work. However when I changed the destination tablespace, it also doesn't work.
Anybody got the idea why this occurs? Thanks.

got error like this
ORA-39152: Table "HSS"."CSS_GROUP_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_USERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_ROLES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_DELEGATED_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_ROLE_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_ROLE_LOCALES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_GROUPS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-00001: unique constraint (HSS.COMPONENT_LINKS_PK_IND) violated
ORA-31693: Table data object "HSS"."HSS_COMPONENT_TYPES" failed to load/unload and is being skipped due to error:
ORA-00001: unique constraint (HSS.COMPONENT_TYPES_PK_IND) violated
ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists

Runtime Error when doing a Network migration

I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
termination)
- It happens when I am doing a network migration (with and without crossover
connection)
- The moment I choose Current User or when I choose next after choosing the
user in Multiple Users
- It works on other machines, could it be something to do with the user
account I am trying to migrate?
Kevin VanSchepen

Actually it also happens when I don't do a network migration. I choose -
create - and it errored when I choose Current User.
>>> Kevin VanSchepen<[email protected]> 3/23/2006 9:37 AM >>>
I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
termination)
- It happens when I am doing a network migration (with and without
crossover
connection)
- The moment I choose Current User or when I choose next after choosing the
user in Multiple Users
- It works on other machines, could it be something to do with the user
account I am trying to migrate?
Kevin VanSchepen

Error when doing material transfer

hi expert,
when doing material transfer from plant 0001 to plant 0002, error pops up :
"maintain vendor for the customer 1234 attached to supplying plant 1234"..
what should i do??
thanks

Dear,
Use XD02( Customer Master Record ) and GOTO -- Genera Data TAB and select Control Tab and under control tab u will find in top VENDOR field.
and for VENDOR Master Record use XK02 and select Control TAB under which at top u will find CUSTOMER FIELD.,
Regards
AJIT K SINGH
HAPPY TO HELP U
Edited by: AJIT K SINGH on Dec 1, 2009 2:01 PM
Edited by: AJIT K SINGH on Dec 1, 2009 5:04 PM

Error when doing a   ATGOrder Bulk load

Hi
Getting the below error when trying to do a bulk load ATGOrder in CSC.
Machine Details :Linux 64bit machine
ATG Version:10.1
17:44:07,487 INFO [OrderOutputConfig] Starting bulk load
17:44:11,482 WARN [loggerI18N] [com.arjuna.ats.internal.jta.recovery.xarecovery1] Local XARecoveryModule.xaRecovery got XA exception javax.transaction.xa.XAException, XAException.XAER_RMERR
17:44:11,488 WARN [loggerI18N] [com.arjuna.ats.internal.jta.recovery.xarecovery1] Local XARecoveryModule.xaRecovery got XA exception javax.transaction.xa.XAException, XAException.XAER_RMERR
17:44:11,495 WARN [loggerI18N] [com.arjuna.ats.internal.jta.recovery.xarecovery1] Local XARecoveryModule.xaRecovery got XA exception javax.transaction.xa.XAException, XAException.XAER_RMERR
17:44:17,651 WARN [LiveIndexingService] Current hosts for environment ATGOrderBulk cannot support requested engine count
17:44:17,652 WARN [LiveIndexingService] Allocate more hosts or increase the maximum number of search engines for one of its hosts
17:44:17,656 ERROR [LiveIndexingService] Unable to release lock: __routingLiveIndexingLock:ATGOrder
atg.service.lockmanager.LockManagerException: Attempt to release a write lock when not the owner: key=__routingLiveIndexingLock:ATGOrder Owner=Thread[http-0.0.0.0-8580-1:ipaddr=172.21.21.49;path=/dyn/admin/nucleus/atg/commerce/search/OrderOutputConfig/;sessionid=B0DC1551B81ACFD6B7C987E59116D825,5,jboss]
at atg.service.lockmanager.ClientLockEntry.releaseWriteLock(ClientLockEntry.java:713)
at atg.service.lockmanager.ClientLockManager.releaseWriteLock(ClientLockManager.java:1386)
at atg.service.lockmanager.ClientLockManager.releaseWriteLock(ClientLockManager.java:1415)
at atg.search.routing.LiveIndexingService.releaseLock(LiveIndexingService.java:1843)
at atg.search.routing.LiveIndexingService.prepareIndexing(LiveIndexingService.java:1455)
at atg.repository.search.indexing.submitter.LiveDocumentSubmitter.beginSession(LiveDocumentSubmitter.java:193)
at atg.repository.search.indexing.BulkLoaderImpl.bulkLoad(BulkLoaderImpl.java:921)
at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1610)
at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1563)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at atg.nucleus.ServiceAdminServlet.printMethodInvocation(ServiceAdminServlet.java:1463)
at atg.nucleus.ServiceAdminServlet.service(ServiceAdminServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at atg.nucleus.Nucleus.service(Nucleus.java:2967)
at atg.nucleus.Nucleus.service(Nucleus.java:2867)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.ServletPathPipelineServlet.service(ServletPathPipelineServlet.java:208)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.security.ExpiredPasswordAdminServlet.service(ExpiredPasswordAdminServlet.java:312)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.BasicAuthenticationPipelineServlet.service(BasicAuthenticationPipelineServlet.java:513)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:491)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:249)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1271)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:952)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:272)
at atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:237)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:451)
at java.lang.Thread.run(Thread.java:662)
17:44:17,658 ERROR [BulkLoader]
atg.repository.search.indexing.IndexingException: atg.search.routing.LiveIndexException: Unable to prepare engines for live indexing.
at atg.repository.search.indexing.submitter.LiveDocumentSubmitter.beginSession(LiveDocumentSubmitter.java:209)
at atg.repository.search.indexing.BulkLoaderImpl.bulkLoad(BulkLoaderImpl.java:921)
at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1610)
at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1563)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at atg.nucleus.ServiceAdminServlet.printMethodInvocation(ServiceAdminServlet.java:1463)
at atg.nucleus.ServiceAdminServlet.service(ServiceAdminServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at atg.nucleus.Nucleus.service(Nucleus.java:2967)
at atg.nucleus.Nucleus.service(Nucleus.java:2867)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.ServletPathPipelineServlet.service(ServletPathPipelineServlet.java:208)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.security.ExpiredPasswordAdminServlet.service(ExpiredPasswordAdminServlet.java:312)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.BasicAuthenticationPipelineServlet.service(BasicAuthenticationPipelineServlet.java:513)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:491)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:249)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1271)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:952)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:272)
at atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:237)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:451)
at java.lang.Thread.run(Thread.java:662)
Caused by: atg.search.routing.LiveIndexException: Unable to prepare engines for live indexing.
at atg.search.routing.LiveIndexingService.prepareBulkIndexing(LiveIndexingService.java:1629)
at atg.search.routing.LiveIndexingService.prepareIndexing(LiveIndexingService.java:1444)
at atg.repository.search.indexing.submitter.LiveDocumentSubmitter.beginSession(LiveDocumentSubmitter.java:193)
... 49 more
Caused by: atg.search.routing.LiveIndexException: Current supported by hosts engine count is less than required count of engines
at atg.search.routing.LiveIndexingService.prepareEnginesForLiveIndexingOperation(LiveIndexingService.java:1161)
at atg.search.routing.LiveIndexingService.prepareEnginesForLiveIndexingOperation(LiveIndexingService.java:1063)
at atg.search.routing.LiveIndexingService.prepareBulkIndexing(LiveIndexingService.java:1625)
... 51 more
17:44:17,675 ERROR [OrderOutputConfig]
atg.repository.search.indexing.IndexingException: atg.repository.search.indexing.IndexingException: atg.search.routing.LiveIndexException: Unable to prepare engines for live indexing.
at atg.repository.search.indexing.BulkLoaderImpl.bulkLoad(BulkLoaderImpl.java:1040)
at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1610)
at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1563)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at atg.nucleus.ServiceAdminServlet.printMethodInvocation(ServiceAdminServlet.java:1463)
at atg.nucleus.ServiceAdminServlet.service(ServiceAdminServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at atg.nucleus.Nucleus.service(Nucleus.java:2967)
at atg.nucleus.Nucleus.service(Nucleus.java:2867)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.ServletPathPipelineServlet.service(ServletPathPipelineServlet.java:208)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.security.ExpiredPasswordAdminServlet.service(ExpiredPasswordAdminServlet.java:312)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.BasicAuthenticationPipelineServlet.service(BasicAuthenticationPipelineServlet.java:513)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:491)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:249)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1271)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:952)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:272)
at atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:237)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:451)
at java.lang.Thread.run(Thread.java:662)
Caused by: atg.repository.search.indexing.IndexingException: atg.search.routing.LiveIndexException: Unable to prepare engines for live indexing.
at atg.repository.search.indexing.submitter.LiveDocumentSubmitter.beginSession(LiveDocumentSubmitter.java:209)
at atg.repository.search.indexing.BulkLoaderImpl.bulkLoad(BulkLoaderImpl.java:921)
... 48 more
Caused by: atg.search.routing.LiveIndexException: Unable to prepare engines for live indexing.
at atg.search.routing.LiveIndexingService.prepareBulkIndexing(LiveIndexingService.java:1629)
at atg.search.routing.LiveIndexingService.prepareIndexing(LiveIndexingService.java:1444)
at atg.repository.search.indexing.submitter.LiveDocumentSubmitter.beginSession(LiveDocumentSubmitter.java:193)
... 49 more
Caused by: atg.search.routing.LiveIndexException: Current supported by hosts engine count is less than required count of engines
at atg.search.routing.LiveIndexingService.prepareEnginesForLiveIndexingOperation(LiveIndexingService.java:1161)
at atg.search.routing.LiveIndexingService.prepareEnginesForLiveIndexingOperation(LiveIndexingService.java:1063)
at atg.search.routing.LiveIndexingService.prepareBulkIndexing(LiveIndexingService.java:1625)
... 51 more

In my /atg/search/routing/LiveIndexingService/ component i have the following values.
ATGProfile      running      yes      yes      8000001      null      1      1      1      start stop cycle delete
backup restore disable
ATGProfileBulk      stopped      NO      yes      null      null      1      0      0      start stop cycle delete
backup restore disable
ATGOrder      running      yes      yes      8000002      null      1      4      4      start stop cycle delete
backup restore disable
ATGOrderBulk      stopped      NO      yes      null      null      1      0      0      start stop cycle delete
backup restore disable
Why is there 4 engins running for ATG Order???? i think this is wat is causing the problem, but i am unable to find from where its creating this 4 engins.

RFC Communication error when doing initial indexing

Hello Everyone,
I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
We currently are on Revision 49.
I also have referred to OSS Note 1138603.
The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
The Global parameters within BIA are:
BATCHPARA - 2
NUMPROC - 5
PKGSIZE - 10000000
SUBPKGSIZE - 20000
We have two app servers with 52 Dialog processes and 25 Background processes.
Any help would be really appreciated.
Thanks
Dharma.

Removing references to systems and ports
Issue:
When the initial indexing is being carried out for an InfoCube to
create the BIA Index and there is more than one application server in
the system the job is failing with the http error.
Hello Everyone,
Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
The error message is,
"Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
Overview/Background:
When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
We also confirmed if the local gateway was used for connectivity.
The above issue was not in other systems where we only had one server.
We currently are at Revision 49 and SP 13 in BI.
We have E5345 Clowertown blades (2 x 4) 16GB blades.
Please let us know if you need additional information.
Thanks in advance for the input.
Dharma.
Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM

WebDAV error when doing a client push ConfigMgr 2012 R2

Hi everyone, I am getting an error message when doing a client push, only on some DPs.
Here is the setup:
ConfigMgr 2012 R2 on Server 2012 R2.
DP are on Server 2008 R2 (for the most part).
DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
No PXE.
Boundary groups are configured as appropriate.
When initiating a client push the following errors are displayed in the CCMSetup.log:
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
The installation is done but yet again, no local DP are used.
The same scenario is actually working on other DP that was configured using the same exact way.
Servers where not new installation and where used for other things:
MDT Deployment Share with PXE.
Other share.
As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
Anyone have any idea?
There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
Thank you guys for any tip and/or help!
Mathieu

You are right about the log, here is a longer snippet of it:
==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="S01"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="CDL"/>
<Forest Name="Test.com"/>
<Domain Name="Test.com"/>
<IPAddresses>
<IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received header '<Msg SchemaVersion="1.1">
<ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
<SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
<SourceHost>ServerSCCMPSS</SourceHost>
<TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item
I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
security and configuration.
All default IIS security and share permission.
Thank you guys for your suggestion and help.
Mat

Dump error when doing ODS activation

Hi,
When doing to the ODS activation, out of 500 data packets 1 data packet is not updated its highlighting Red traffic light. After that i selected that incorrect data packet i given manual update sytem is gives ABAP runtime errror MESSAGE_TYPE_X. i checked in SM21 as well as ST22 also it was MESSAGE_TYPE_X.
Run-time error "MESSAGE_TYPE_X" occurred
> Short dump "090413 143857 ccdbwprd BIADMIN " generated
Run-time error "MESSAGE_TYPE_X" occurred
> Short dump "090413 144123 ccdbwprd BIADMIN " generated
Run-time error "MESSAGE_TYPE_X" occurred
> Short dump "090413 144435 ccdbwprd BIADMIN " generated
Transaction Canceled BT 510 ( )
Run-time error "MESSAGE_TYPE_X" occurred
> Short dump "090413 150322 ccdbwprd BIADMIN " generated
Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150322ccdbwprd BIADMIN 0051 )
Run-time error "MESSAGE_TYPE_X" occurred
> Short dump "090413 150639 ccdbwprd BIADMIN " generated
Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150639ccdbwprd BIADMIN 0051 )
Run-time error "MESSAGE_TYPE_X" occurred
> Short dump "090413 150837 ccdbwprd BIADMIN " generated
please give ur suggestion to solve this issue.
Thanks & Regards
Khamesh

please verify the note 852443

Oracle error when doing filter to joins

when doing a filter based upon on results of another request i get the following error. error : (Response came back as text, not XML) the saved request i am linking to has unions in it vs being a single request. If i link to a single request it works but the data i need to get from has unions in it. can anyone please help.

You are still not entirely clear. BI EE or BI Applications related.
Also to help matters further could you post as much information as possible.
Thanks

Error when doing a rman backup

Similar Messages

Maybe you are looking for