Error when doing MIGO

Dear All,
While doing MIGO of a process order the system in certain cases gives an process order not confirmed but the status is actually confirmed .
When now cancel the process order and again do confirmation the system allows to do MIGO
this does not happen with all process only in certain few process orders
What must be the reason.
Is it a material document is not generated when the confirmation is done in this as a result the system show this error.
Regards and thanks in advance
Ram

Hi,
I am not sure it may be happen because when you confirm process order by mistsken you were keeping partial confirmation radio button on .Brcause of that system showing you error order to be confirmed.
Just check & revert me back.
Regards
SANIL

Similar Messages

  • Unusual Error,when doing MIGO

    Hello Experts..
    When we are doing MIGO,we are getting the following error.
    " MARC-VMTRA EXCEEDED by 7.3 TO.".
    Tried a lot....  but not understanding.
    Pls GUIDE....
    VERY VERY URGENT.....!
    Rgds
    sumanth.G

    Dear Sumanth,
    Your problem might be Plant Data for Material Stock in transit for prev. period is reached its level.
    check your stock level as well material master settings mean MRP or Forecast settings
    Hope problem will solve
    Prem

  • TS1702 I got this error when doing a restore

    I got this error when doing a restore and the restrictions were turned on .  I disabled restrictions and the restore was able to complete.

    The error in itunes had a link to http://support.apple.com/kb/TS1702.  I placed this message here for anyone that might navigate to the same message and would hopefully find this.  Yes turning off restrictions allowed the restore to complete and everyone is now happy.

  • Error while doing MIGO for a sub-contracted item

    Hello to Everybody,
    I am facing below problem -
    Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
    <Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
    May I request for possible solution to above error ?
    regards,

    Dear Sanjay,
    You can determine the cost object for the posting of the  costs in the transaction OKB9.
    Following thread should resolve this issue:
    Re: cost of subcontracting
    Regards,
    Naveen.

  • Error while doing MIGO

    Hi Experts,
    While doing migo system showing the error message:
    in this purchase order no excise.
    It is IS OIL process.
    Maintain pricing conditions for the material for the excise invoice date
        Message no. 8I629
    Pls help some one.
    Regards,
    Hanuman.

    HI
    is it Excisable Material, did you maintain  the Tax indicator in PO stage? IF yes , next step is to check , are you selecting the right Post to....... register menu during MIGO, for example we use Post to Part-1 register only, then if yes , the you are getting this error becuse you have missed the J1ID master data details. Minimum you should maintain 1. chapter_id details, 2. Material and chapter_id combination 3. Vendor Excise details. for the materials you are tring to make GR.
    Best Regards
    SAM

  • Error when doing importing with impdp

    Hi,
    I tried to do export then import the schema from and to same schema. However, when doing export with expdp everything was okay.
    Problem begins when I tried to do importing by using impdp. I also tried to drop the current schema and created the new one but it still doesn't work.
    If I didn't drop the current schema, it logs looks like this
    Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
    ORA-31684: Object type SEQUENCE:"HSS"."LCM-MIGRATION_ID-SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."WKS_IDENTITY_SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_RESOURCE_SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_LEASE_OWNER_SEQ" already exists
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39151: Table "HSS"."HSS_COMPONENT" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_LINKS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_PROPERTY_VALUES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_TIERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."ESS_CLUSTER_SERVER_MAPPING" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_TYPES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_IDENTITY" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_GROUP_MEMBERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_USERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    Job "HSS"."SYS_IMPORT_FULL_01" completed with 95 error(s) at 08:47:21
    And then this is the log when doing importing, I only highlighted the necessary part which I think related with my problem
    Starting "HYPSS"."SYS_IMPORT_FULL_01": HYPSS/******** TRANSFORM=oid:n:type directory=test_dir logfile=imptest.log dumpfile=HYPSS.dmp
    Processing object type SCHEMA_EXPORT/USER
    ORA-31684: Object type USER:"HYPSS" already exists
    . . imported "HYPSS"."CSS_ROLE_LOCALES" 1.630 MB 6358 rows
    . . imported "HYPSS"."HSS_COMPONENT_FILES" 601.5 KB 33 rows
    . . imported "HYPSS"."HSS_COMPONENT_PROPERTY_VALUES" 130.7 KB 1657 rows
    . . imported "HYPSS"."CES_APPS" 10.54 KB 1 rows
    etc....
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39083: Object type INDEX_STATISTICS failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    DECLARE I_N VARCHAR2(60); I_O VARCHAR2(60); c DBMS_METADATA.T_VAR_COLL; df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS"; c(1) := 'TRIGGER_NAME'; c(2) := 'TRIGGER_GROUP'; DBMS_METADATA.GET_STAT_INDNAME('HYPSS','QRTZ_TRIGGERS',c,2,i_o,i_n); INSERT INTO "SYS"."IMPDP_STATS" (type,version,flags,c1,c2,c3,c5,n1,n2,n3,n4,n5,n6,n7,n8,n
    Processing object type SCHEMA_EXPORT/TABLE/COMMENT
    The source schema is on USERS tablespace (default). The destination schema I tried to put on the same tablespace but it doesn't work. However when I changed the destination tablespace, it also doesn't work.
    Anybody got the idea why this occurs? Thanks.

    got error like this
    ORA-39152: Table "HSS"."CSS_GROUP_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_USERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_DELEGATED_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLE_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLE_LOCALES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_GROUPS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-00001: unique constraint (HSS.COMPONENT_LINKS_PK_IND) violated
    ORA-31693: Table data object "HSS"."HSS_COMPONENT_TYPES" failed to load/unload and is being skipped due to error:
    ORA-00001: unique constraint (HSS.COMPONENT_TYPES_PK_IND) violated
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists

  • Runtime Error when doing a Network migration

    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

    Actually it also happens when I don't do a network migration. I choose -
    create - and it errored when I choose Current User.
    >>> Kevin VanSchepen<[email protected]> 3/23/2006 9:37 AM >>>
    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without
    crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

  • No rfc destination defined for global trade services error while doing migo

    Hi all,
    Pls help me in fixing the following error..
    "no rfc destination defined for global trade services" error while doing migo

    i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
    Meanwhile, check this note:
    Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
    Cheers,
    Jazz

  • WBS error while doing MIGO

    Dear Experts,
    I am getting following error while performing MIGO - The WBS element XXXXXXX is not the lowest level in the project.
    Kindly let me know what does this error mean and how to resolve the issue.
    Thanks in advance
    Leena

    Leena0 wrote:
    - The WBS element XXXXXXX is not the lowest level in the project.
    >
    It seems there is a validation in the system which checks whether any child WBSE is available. It might be a business requirement to post actual cost only on the lowest WBSE. It could be a user exit. Please check the functional specifications prepared during the implementation.

  • Spool error while doing migo

    Dear MM Experts,
    While doing migo i am getting error as "Error in spool c call spool overflow"
    Got this thread but not getting exactly : http://forums.sdn.sap.com/thread.jspa?messageID=4528971#452897
    Please help me out.
    Thanks & Regards,
    Sandeep.

    Hi all
    Delete the old spool request using SPAD .
    regards,
    reza rostami / mapna

  • Error when doing material transfer

    hi expert,
    when doing material transfer from plant 0001 to plant 0002, error pops up :
    "maintain vendor for the customer 1234 attached to supplying plant 1234"..
    what should i do??
    thanks

    Dear,
            Use XD02( Customer Master Record )  and GOTO -- Genera Data TAB and select Control Tab and under control tab u will find in top VENDOR field.
           and for VENDOR Master Record use XK02 and select Control TAB under which at top u will find CUSTOMER FIELD.,
    Regards
    AJIT K SINGH
    HAPPY TO HELP U
    Edited by: AJIT K SINGH on Dec 1, 2009 2:01 PM
    Edited by: AJIT K SINGH on Dec 1, 2009 5:04 PM

  • RFC Communication error when doing initial indexing

    Hello Everyone,
    I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
    We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
    We currently are on Revision 49.
    I also have referred to OSS Note 1138603.
    The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
    The Global parameters within BIA are:
    BATCHPARA - 2
    NUMPROC - 5
    PKGSIZE - 10000000
    SUBPKGSIZE - 20000
    We have two app servers with 52 Dialog processes and 25 Background processes.
    Any help would be really appreciated.
    Thanks
    Dharma.

    Removing references to systems and ports
    Issue:
    When the initial indexing is being carried out for an InfoCube to
    create the BIA Index and there is more than one application server in
    the system the job is failing with the http error.
    Hello Everyone,
    Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
    The error message is,
    "Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
    Overview/Background:
    When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
    In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
    When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
    Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
    Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
    We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
    We also confirmed if the local gateway was used for connectivity.
    The above issue was not in other systems where we only had one server.
    We currently are at Revision 49 and SP 13 in BI.
    We have E5345 Clowertown blades (2 x 4) 16GB blades.
    Please let us know if you need additional information.
    Thanks in advance for the input.
    Dharma.
    Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM

  • WebDAV error when doing a client push ConfigMgr 2012 R2

    Hi everyone, I am getting an error message when doing a client push, only on some DPs.
    Here is the setup:
    ConfigMgr 2012 R2 on Server 2012 R2.
    DP are on Server 2008 R2 (for the most part).
    DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
    No PXE.
    Boundary groups are configured as appropriate.
    When initiating a client push the following errors are displayed in the CCMSetup.log:
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
    Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
    GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
    The installation is done but yet again, no local DP are used.
    The same scenario is actually working on other DP that was configured using the same exact way.
    Servers where not new installation and where used for other things:
    MDT Deployment Share with PXE.
    Other share.
    As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
    Anyone have any idea?
    There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
    Thank you guys for any tip and/or help!
    Mathieu

    You are right about the log, here is a longer snippet of it:
    ==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
    Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
    OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
    <AssignedSite SiteCode="S01"/>
    <ClientPackage/>
    <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
    <ADSite Name="CDL"/>
    <Forest Name="Test.com"/>
    <Domain Name="Test.com"/>
    <IPAddresses>
    <IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
    </IPAddresses>
    </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Received header '<Msg SchemaVersion="1.1">
    <ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
    <SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
    <SourceHost>ServerSCCMPSS</SourceHost>
    <TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
    <ReplyTo>MP_LocationManager</ReplyTo>
    <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
    <Priority>3</Priority>
    <Timeout>600</Timeout>
    <ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item
    I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
    As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
    security and configuration.
    All default IIS security and share permission.
    Thank you guys for your suggestion and help. 
    Mat

  • Dump error when doing ODS activation

    Hi,
      When doing to the ODS activation, out of 500 data packets 1 data packet is not updated its highlighting Red traffic light. After that i selected that incorrect data packet i given manual update sytem is gives ABAP runtime errror MESSAGE_TYPE_X. i checked in SM21 as well as ST22 also it was MESSAGE_TYPE_X.
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 143857 ccdbwprd BIADMIN " generated                             
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 144123 ccdbwprd BIADMIN " generated                             
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 144435 ccdbwprd BIADMIN " generated                             
    Transaction Canceled BT 510 ( )                                                      
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 150322 ccdbwprd BIADMIN " generated                             
    Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150322ccdbwprd BIADMIN 0051 )   
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 150639 ccdbwprd BIADMIN " generated                             
    Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150639ccdbwprd BIADMIN 0051 )   
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 150837 ccdbwprd BIADMIN " generated                             
    please give ur suggestion to solve this issue.
    Thanks & Regards
    Khamesh

    please verify the note 852443

  • Oracle error when doing filter to joins

    when doing a filter based upon on results of another request i get the following error. error : (Response came back as text, not XML) the saved request i am linking to has unions in it vs being a single request. If i link to a single request it works but the data i need to get from has unions in it. can anyone please help.

    You are still not entirely clear. BI EE or BI Applications related.
    Also to help matters further could you post as much information as possible.
    Thanks

Maybe you are looking for