Error when Drill down on top level of hierarchy node

Hi Gurus,
The following error occurs when I drill down to a "Actual Line items sub report" using the "top node" of an hierarchy based report .
But, the same drill down works fine when I drill down using the very sub level of the same hierarchy (without any further levels of hierarchies).
System error in program SAPLRRK0 and form NACHLESEN_INIT_NODE-01-
Any help or work around suggestion would be highly appreciated.
Thanks
Ajay

Hi,
Thanks for the start.
But, My Hierarchy is already active.
Any other place to check for?

Similar Messages

OBIEE 11g Report-When drilling down to lower level, totals are not matching

Hi All,
I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
FY BCost ACost
2011 100 120
2012 150 140
Total 250 260
But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
FY FY Qrt BCost ACost
2011 2011 Q1 80 100
2011 Q2 100 90
2011 Q3 110 120
2011 Q4 90 130
Total 380 440
Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
Any suggestions?

Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
Mark as helpful if it helps.
Regards,
Veeresh Rayan

Workspace error when drilling down on Essbase Cube

An Interactive Reporting Service error has occurred.-Failed to acquire requested service.
(2001)
We're trying to create OLAP queries in IR to deploy through workspace. When I drill down on any dimension, after deploying to workspace, I get the generic error above. Has anyone seen this error?

I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful.

Error when drill down with essbase hierarchy

Hi ,
I am displaying one bar chart with, one Ragged hierarchy dimension "Region" ( structure : total region - > India , US -> India south , US south -> chennai , California) and "revenue" (measure) .
Sometime's the drill down is happening smoothly (region - > sub region - > city) but sometimes its throwing below error :
Error Codes: OAMP2OPY:QIKSHNQU
DXE compiler error. Coordinate in target list must match to*coordinate in group by list. Source name:*
GroupbyAndCoorTableCompiler::run. XML: <sawxd:expr*xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"**xmlns:sawxd="com.siebel.analytics.web/expressiondxe/v1.1"**xmlns:sawq="com.siebel.analytics.web/querydxe/v1.1"**xsi:type="sawq:groupbyField" refCoorID="5"/>*
FYI , I have a product prompt attached with this graph . i.e , when user selects "total product" and drilling down its
working perfectly but when selects "network products" its throwing the mentioned error .
OBIEE version used : 11.1.1.6.2 (Build 120604.0813 BP1 64-bit)
essbase version used : 11.1.2.1
Thanks
sayak

I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful.

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

Limit the members shown when drilling down

Hi,
Is it possible to limit the members shown of a level, when drilling down? I have a dimension in groups with a medium level that has a lot of members, and when I drill down from the top level in this dimension, a lot of members are shown and the graph is too confused.
Thanks in advanced...

Hi all,
I have discoreved how to do this programmatically.
//Limit series to 10 elements
graph.setDisplaySeries(10);
graph.setDisplaySeriesLimit(10);
graph.setAutoLayout(Graph.AL_NEVER);
graph.setLegendScrollbarPresence(ThinGraph.SP_NEVER);
graph.setLegendSeriesCount(10);
graph.setScrollbarPresenceSeries(ThinGraph.SP_NEVER);
//And limit groups to 10 elements
graph.setDisplayGroups(10);
graph.setDisplayGroupsLimit(10);
graph.setScrollbarPresenceGroups(ThinGraph.SP_NEVER);
Hope this helps someone with the same problem...

CrystalReportsViewer 2011 rendering errors on drill down.

Hi
I am displaying a report containing several groups inside the CrystalReportViewer (version 2011) in ASP.NET 3.5.
The viewer works fine, however when I try to drill down into a group using the treeview navigator:
- the whole page is redrawn and it appears to move outside the window (i.e. only part of it is visible, the rest of the page is blank)
- the Drill event does not fire on the code behind
This is not the case when drilling down into a group by clicking on it within the report itself.
Any help is much appreciated.
Peter
Edited by: peter__tyler123456 on Nov 21, 2011 5:18 PM

Hi,
Uninstall the crystal component you are refering to as Crystal Reports 2011 runtime.
Install [Crystal Reports for Visual Studio 2010 SP1|http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_13_0_1.exe]on top of Visual Studio 2010.
Open the crystal report in the CR for VS 2010 bundled designer, preview it and see if it works fine.
Then create a sample application and try to view the report.
See if it reproduces the issue.
Thanks,
Bhushan.

Incorrect grand total when drilling down

Hi,
I have a simple crosstab report showing budgets and costs against consortia. The consortia names are the row headers.
There is a heiracrhy of practices within consortia.
I have a 'grand total' calculation at the bottom.
When I drill down from any consortium to the practices within it, the total is fine - even if I drill down from all the consortia, as long as I drill down from each consortium one at a time.
BUT - if I drill down to practice level in one go (from the heading bar above the consortium names), the total is doubled!
Has anyone else had this problem? Any solutions?
Thanks

Hi,
The total is doubled because the level1 itself is a total of level2. So, the report will looks like this:
Consortium 100
Practice1 50
Practice2 50
The solution, I would suggest is first have subtotals for each change in Consortium and then add a calculation as SUM(subtotal). Dont display the subtotals.
This is just a workaround though.
Hope this helps,
Yogini

Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document.Line.

Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document. This can be the
result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format. Please who have the idea of how this issue can be resolved?BI Developer

Hi ,
for this Error one and only one solution
go to view Code, line number and Column number shown in error message,
and Remove code from there till last and save it, it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
something like this
andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0">
<control>
<ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" />
</control>
<layoutobject>
<ddsxmlobj>
<property name="LogicalObject" value="{BBFB0E
Remove this code and save package it will work.
hope this will help to Developers who are searching for same ......... :)

Front panel of a vi pops up when i start my top level vi how can i stop this

i have a vi that whos front panel should display when the user clicks a front panel button(test instructions),
however this vi pops up when i run the top level vi. I can manually close the vi, but how do i stop this?
i tried modifying the Sub VI Set up properties, but that doesnt work.
Solved!
Go to Solution.

Hi jknapp,
As egraham has pointed out, you can customize the window appearance of your sub VI from the VI Properties. If you go to File » VI Properties, then under Category select Window Appearance and then Customize..., you should be able to control how the sub VI appears. Hope this helps!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Error when posting Down payment with reference to down payment request

Hi Experts,
In October of 2010 we upgraded from version SAP 4.7 to version 604 SAPKH60406.
With this upgrade we decided to select the following FM setting:
"Flag to activate down payment request update to PO history"
If this flag is set, down payment requests are updated to the purchase order history. In addition, when you create a down payment referencing this down payment request , the down payment request is cleared by the down payment.
Use- Set this flag if you want to see the down payment requests in the purchase order history.
So, since October 2010, the Down payment requests have been updated to the PO history (note - no update of the down payment request was made to the PO status tab) and the down payments (made with reference to the down payment request) have been clearing the DP requests.
Today we have applied packages SAPKH60407 - SAPKH60409 and we are in the process of testing.
Now we are experiencing errors when processing down payments:
1. create the down payment request (F-47) - this is OK
2. create the down payment (F-48) with reference to the down payment request - ERROR MESSAGE F5373 - "Order value will be exceeded"
Can anyone please explain why this is happening? We would like to keep the "Flag to activate DPR update to PO history" ON
as it has been since October 2010.
Thanks,
Michelle

Hi,
Please find the below link it will help full for you,........
Order Value will be exceeded Msg No. F5373
Naresh

Pie Chart legend text when drill down too larger

Dear Gurus,
I have this report with Pie chart:
*)Table:
Element Group
Earnings 100
Deductions 30
When drill down (after click on Earnings/Deductions), it become detail like this:
Element Group Classification Name
Earning Regular
Earning Irregular
And the Pie chart legend show this: Earnings, Regular Earnings
->how to remove Earnings?I just want to show classification name as legend.
I use OBIEE 11.1.1.3
Any help will be appreciated
Regards
Joe
Edited by: JoeSSI on Aug 10, 2012 12:33 AM
Edited by: JoeSSI on Aug 10, 2012 12:35 AM
Edited by: JoeSSI on Aug 10, 2012 3:24 AM

Hi Joe,
There was a bug associated with repeated legends in 11.1.1.3 version.Can you check the below document and see if the mentioned patch helps,
Vertical Bar Charts In OBIEE 11g Display Repeated Labels In The Graph Legend [ID 1376185.1]
Regards,
Dpka

Error when closing down (NetworkUXBroker.exe)

I get this error when closing down Win 10. Just to let you know...
NetworkUXBroker.exe
The instruction at 0x00007FFDA03BB070 referenced memory at 0x000000CA1AD04F0

Error message when closing down computer
Ainslie Collison - 09:03pm Sep 12, 2008 Pacific
Adobe photoshop downloader boot will not shut down automatically when I close down the computer. What settings can I change. I cannot find anything to help in edit/preferences. I have the starter edition.

Javascript Drow-down on Top Level/Secondary Navigation

Which component supports the Javascript Drow-down on Top Level/Secondary Navigation feature? WE are on SPS 16 on portal, but I thought this feature was released on SPS 14. I could not see the feature on SPS 12-15 EP release notes.
Thanks.
James

Hi,
I am not sure if u can do the dropdown of the DTN from the TLN with the standard portal. Needs more research..
Regards,
Harini S

OBIEE BI Answers: Wrong Aggregation Measures on top level of hierarchy

Hi to all,
I have following problem. I hope to be clear in my English because it's a bit complicated to explain.
I have following fact table:
Drug Id Ordered Quantity
1 9
2 4
1 3
2 2
and following Drug Table:
Drug Brand Id Brand Description Drug Active Ingredient Id Drug Active Ingredient Description
1 Aulin 1 Nimesulide
2 Asprina 2 Acetilsalicilico
In AWM i've defined a Drug Dimension based on following hierarchy: Drug Active Ingredient (parent) - Drug Brand Description (leaf) mapped as:
Drug Active Ingredient = Drug Active Ingredient Id of my Drug Table (LONG DESCRIPTION Attribute=Drug Active Ingredient Description)
Drug Brand Description = Drug Brand Id of my Drug Table (LONG DESCRIPTION Attribute = Drug Brand Description)
Indeed in my cube I've mapped leaf level Drug Brand Description = Drug Id of my fact table. In AWM Drug Dimension is mapped as Sum Aggregation Operator
If I select on Answers Drug Active Ingredient (parent of my hierarchy) and Ordered Quantity I see following result
Drug Active Ingredient Description Ordered Quantity
Acetilsalicilico 24
Nimesulide 12
indeed of correct values
Drug Active Ingredient Description Ordered Quantity
Acetilsalicilico 12
Nimesulide 6
EXACTLY the double!!!!!!! But if I drill down Drug Active Ingredient Description Acetilsalicilico I see correctly:
Drug Active Ingredient Description Drug Brand Description Ordered Quantity
Acetilsalicilico
- Aspirina 12
Total 12
Wrong Aggregation is only on top level of hierarchy. Aggregation on lower level of hierarchy is correct. Maybe Answers sum also Total Row????? Why?????
I'm frustrated. I beg your help, please!!!!!!!!
Giancarlo

Hi,
in NQSConfig.ini I can't find Cache Section. I post all file. Tell me what I must change. I know your patient is quite at limit!!!!!!! But I'm a new user of OBIEE.
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
#Star     =     samplesales.rpd, DEFAULT;
Star = Step3.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "Italian";
SORT_ORDER_LOCALE     =     "Italian";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
#AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";

Error when Drill down on top level of hierarchy node

Similar Messages

Maybe you are looking for