Error when execute a planning function on selected line

Hello together,
we are using SAP BusinessObjects Analysis 1.4 SP9 (1.4.9.3241, Office 2013) and SAP BW 7.3 SP 11 (SAPKW73011).
When executing a planning function on an selected line in the crosstab, the following error appears:
The VBA Coding used is from HowTo Execute a Planning Function on Selected Lines in an Analysis for Office Workbook.
The Code worked fine with an older version of SAP BO Analysis and Excel 2007.
Going to debugging:
As you can see in the screenshot, the selected line (Dimension "0PRODUCT") is selected correctly.
The settings for the planning function are the following:
Thank you in advance for any advice.
Best regards
Alex

Similar Messages

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Error when creating a planning function

hi,
I am creating a Planning function type using RSPLF1. Also i have created a custom class for the same. But when i try to create a planning function through RSPLAN, and using this custom planning function type, I get the following error:
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
    at java.util.Vector.get(Vector.java:733)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.hlp.FromToStore2.getToList(FromToStore2.java:74)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp._fillTableFromStore(FromToHelperComp.java:1422)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp._loadAll(FromToHelperComp.java:1825)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp.setAll(FromToHelperComp.java:388)
    ... 53 more
Can anyone let me know what this means and what I am missing ?

Hi,
Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

Sequencing of variables when executing a planning function in IP

I am using BI Integrated Planning and have created a web application that executes a u201CCopyu201D planning function on the click of a button. The u201CCopyu201D planning function has a number of variables to accept u201CThe Fromu201D and u201CTou201D values. When I click on the button, I am prompted for the variable values. However, I would like to re-sequence the list of variables that appear on the prompt.
We are on BI 7.0 Support Pack 17.
Any pointer is appreciated.
Regards,
Sanjay Kumar

Hello Sanjay,
I am afraid this is not possible. There is no option provided to arrange the order of input variables for a planning function.
An idea would be to include a query in the web template containing the same variables and arranging them in the query properties; and hide this query in the web template.

Error when execute Load Plan

Dear all,
When I tried to execute the Load Plan , I get this error:
ODI-1551 the dbms_lock acquisition faild with sql exception
OR06550: ????1?????7.
PL00201: identifier 'DBMS_LOCK' must be declared.
OR06550: ????1?????7.
PL/SQL statement ignored.
Thank you,

The link as below maybe helpful
dbms lock must be declared

Error when executing report with large data selection in Infoview

Hello,
This is regarding Error we are facing in BO system.
We have installed:
Business Object Enterprise XI 3.1
Crystal report 2008
When we are trying to execute report in BO INFOVIEW on production system, we are facing following error (After 10 mins of execution).
========================================================================================
Windows Internet Explorer
Stop running this script?
As script on this page is causing Internet Explorere to tun slowly.
If it continues to run, your computer might become
unresponsive.
========================================================================================
Please note: We are getting data via Crytal report. Only, execution in infoview is giving error.
If we are executing same report with less data(E.g a days data) then we are getting output in Infoview.
However, when we execute report with more data (6 months data) then we are getting attached error after 10 min of execution time.
Helpfull reply will be awarded.
Regards.
Edited by: Nirav Shah on Dec 14, 2010 6:19 AM

If it is indeed a server timeout issue, the following document might be usefull: http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/606e9338-bf3e-2b10-b7ab-ce76a7e34432
It's about Troubleshooting Time-outs in BusinessObjects Enterprise XI, but a lot is still applicable.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken

Error when executing Planning function in BEx Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Hi Geerts,
If i understood well, you have some problem with your query. Please check the query that you have on WAD and wich characteristics did you have on your level (the level on wich the query is based).
Pls, check the correct execution on that query on Query Designer too. That query is a plan query? it`s ready for input ?
Hope this help
Natalia.

Error when executing planning application in Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Have you considered creating a characteristic relationship with an EXIT Class. In this way you are able to make the value whatever you want according to the rules you code.

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

An error occurred when executing a REMOTE FUNCTION CALL.

Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
<b>Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "RFC_NO_AUTHORITY"
    on the called page.</b>
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.

first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Authorization problem in executing a Planning Function

Hi All,
We are facing an authorization issue while executing a planning function in a WAD template.
The error message is :
The planning function ended with errors.
The user does not have authorization on infoprovider YF2IGM37.
But the relevant authorizations have already been provided to the said user for:
S_RS_ALVL,S_RS_PLENQ ,S_RS_PLSE ,S_RS_RLSQ, S_RS_PLST along with authorization for
Cube, multiprovider, query as well as aggregation layer.
Could anyone pls help us resolving the issue.
rgds,
Nandini.

Check any authorization relevant infoobject user is not authorized for.
For example, if company code is authorization relevant,and in your query any default company code is provided, user may not have the relevant access.

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error when execute a planning function on selected line

Similar Messages

Maybe you are looking for