Error when executing a query in ECC

W'e're getting the following error when attempting to run a Crystal Report (2008) that uses an SAP ECC query as the datasource:
Database Connector Error: "Screen output without connection to user"
Anyone seen this before? Tried looking this up in the forum but didn't find anything.
Thanks.

Are you up to date on the Crystal ECC transports?
Is the user running the Crystal Reported assigned to the SAP query user group (SQ03/02)?
I have seen strange errors with these two things.
Why not upgrade to CR 2011? We found with our license there was no addiitional fee/cost to do this.
Tammy

Similar Messages

ORA-29902 Error when executing context query

We sometimes get the following error when executing a search based on keywords entered by a user:
<BLOCKQUOTE>quote:<HR>Error generating context stmt ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: interMedia Text error: DRG-50901: text query <HR></BLOCKQUOTE>
A demonstration of the error can be seen by going to the main
http://technet.oracle.com technet page and then performing a site search. Type in any of the following search phrases:
Oracle and not Microsoft
not Microsoft
and database
In my brief experimentation, the presence of any of
not, and, or
at the beginning of the keywords, or next to each other 'and not' within the keywords set causes the above oracle error.
OK, I could train the users not to do this, but with the potential for every net user on the planet using my site, it might take me some time to speak to all of them.
So how do I stop Intermedia from throwing up the error? I have written a quick parser to try to strip out offending entries, but that is not, imho, a good solution, as I do not know all the rules that will break it.
tia

You need to write a text query parser. Check the Query Translator code samples from http://technet.oracle.com/sample_code/products/text/content.html

Error when executing a Query through information Broadcasting

Dear SDN,
We have configured information Broadcasting in the Web Reports---
Scheduled and then when executing the following error is coming
500 internal server error - Microsoft internet explorer
Error when processing your request
What has happened?
The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
Note
The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest us to resolve this error..
Help will be greatly appreciated with points..
Thanks in advance

Hi
Thanks...
I have given only Fiscal Year/Period Variable
Other than Fiscal Year/Period Variable....No Variables in that Query..
In FI Queries, I did not use 0CALMONTH Variable...
I do not know why it is giving that error..
Please suggest us to resolve this error..
Thanks in advance

Error when executing a query on upgraded system

Hi All,
We are in the process of upgrading our BI system. Currently we are on Quality system and its a copy of existing production system. I have executed a query on the production system (3.5 system) successfully.
But the same query when I'm trying to execute on the upgraded quality system (BI 7.0), I get an error " warning info provider was changed or activated at runtime. The query cannot be opened". The same message doesn't pop up on the current 3.5 BI system.
Can anyone help me how I can correct this error?
regards,
Suman

Hi All,
I activated the Infoset and I could eliminate the error. Now the issue is solved.
Thanks

Error when executing a query on master data

Hi Friends,
When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
An error occured in the communication with the BW Server.
Due to this connection has to be closed.
Detailed Description:
The system is configured incorrectly.
Please tell me what could be the problem? How to overcome this?
Thanks,
Sasi

Hi Arun,
Before the execution of query I did that. And it was ' Query is Correct'.
Any more ideas?
Thanks,
Sasi.

No space left in shared memory error when executing a query

Hi,
When I executed a query, it showed the results. But when I drilled down it by material, it showed the following error message.
Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occured
Error No space left in shared memory
Is there anyone know what is the reason and how to resolve?
Many Thanks
Jean

Your report got too big and you ran out of memory on the server.
Run it for a smaller data set (e.g., a few months instead of a year) to avoid this problem.
Hope this helps...
Bob

Error when executing the query or refreshing the workbook

Hi All,
Whenever I am trying to execute a query or refresh a workbook a error message is poping up saying that
Error: <internal error> Problem when writing table: E_T_cel.
I face this error in few of the queries and when i refresh workbooks. These queries have lot of calculations and filters and they sum up lot of records.
Any help greatly appreciated.
Thanks
Raj.

Hi Maik,
Thanks for reply, I went into tran sm21 but i could not understand the messages there. Below is the list of messages in sm21
 System Log: Local Analysis of cdsap9d 1
From date/time............. 04/20/2005 / 10:00:00
To date/time............... 04/21/2005 /
User....................... KADALPR
Transaction code...........
Terminal...................
Task.......................
Problem class..............
Further restrictions.......
Sorted ? ................ SOFI
Pages with single entries 00000100
With statistics............
 System Log: Local Analysis of cdsap9d 2
Time Ty. Nr Cl. Tcod MNo Text Date : 20.04.05
12:58:10 DIA 0 100 R49 Communication error, CPIC return code 019, SAP return code 728
12:58:10 DIA 0 100 R5A > Conversation ID: 29858195
12:58:10 DIA 0 100 R64 > CPI-C function: CMSEND(SAP)
12:58:10 DIA 0 100 R68 Perform rollback
12:58:10 DIA 0 100 R47 Delete session 001 after error 003
23:54:49 DIA 1 100 R49 Communication error, CPIC return code 019, SAP return code 728
23:54:49 DIA 1 100 R5A > Conversation ID: 44959947
23:54:49 DIA 1 100 R64 > CPI-C function: CMSEND(SAP)
System Log: Local Analysis of cdsap9d 3
Time Ty. Nr Cl. Tcod MNo Text Date : 21.04.05
09:32:50 DIA 2 100 R49 Communication error, CPIC return code 019, SAP return code 728
09:32:50 DIA 2 100 R5A > Conversation ID: 83536783
09:32:50 DIA 2 100 R64 > CPI-C function: CMSEND(SAP)
Reading:
Number of records read......... 2777
Number of records selected..... 11
Old records skipped............ 2733
Records of invalid users skippe 33
Further selection:
Number of records read......... 11
Number of records selected..... 11
Number of records printed...... 11
End of system log
 System Log: Local Analysis of cdsap9d 4
 C o n t e n t s
Contents Page Start End
Selection criteria 1
 2 20.04.2005 12:58:10 - 23:54:49
 3 21.04.2005 09:32:50 - 09:32:50
Contents 4
End of program -
If you can help me out as where to look at these messages then it great.
Thanks,
Raj.

Error when execute a query BW in WEBI

Hi Gurus,
I need your help:
Status:
SAP_ABA 700
SAP_BASIS 700
PI_BASIS 2005_1_700
SAP_BW 700
BI_CONT 703
SAP GUI 7.10 SP 7
I run a 3.5 query with bex and all its ok.
But when i want run the same query in BOE Web Intelligence Rich Client I have an error
In WEBI: error : WIS 10901 for MDX QUERY
in BW TR: SM21 : Communication error, CPIC return code 020, SAP return code 456.
thxxhead 7415 020456 ThRecei CPIC-Er
If I just put one masterdata, the query return the list of this MD.
But when i put 2 MD or one indicators, i have error.
Thanks for help.

Hi Ingo,
In response to your questions:
- "you did install the SAP Integration Kit?": yes, we did a "server" install. The other options are Desktop and Custom
- "its not an evaluation key that has expired ?": No, this is not the case
- "did you check the MDX Parser destination in transaction SM59 ?": Yes, this is working now (SM59 - connection test succesful).
- "Try a simple BI Query and build a new Web Intelligence report on top (java, dhtml)" We did this, results:
WebI Rich Client. This worked fine. Report made, refreshes, can add objects, ...
Web Advanced (JAVA Report panel): we get error - "An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: .(WIS 10901)"
We checked if we didn't miss anything with the server installation of the SAP integration kit, this was not the case. When we chose a "repair install", all options where already installed. What we did do, is install the Fix pack2. Reason: there was a reference to mda_sap.dll in the BusinessObjects Enterprise XI 3.0 FixPack 2 notes. Note: refer to new thread: Cluster Definition transport error - BO XI 3.0 FixPack 2 (Server&Client)
- We also tried a more advanced query, with prompted filters and calculations.
WebI Rich Client. same error as before, "The MDX-query <MDX syntax> See RFC trace file or SAP system log for more details. (WIS 10901)"
Web Advanced (JAVA Report panel): same error as before - "An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: .(WIS 10901)"
Seems we have the same problem as Claudia + an mda_sap issue. We are running out of options here. Any thoughts on this?
Thanks for your help!
Raf

Error when executing the query.

Hello ,
I have some customer exit variables used in my reports , and when I execute the report I get an error like " My variable name cannot be interpreted as number " The way I declared the variable is of customer exit type and as a Number, in my customer exit I'm using it as 'My variable" in computation , is this why ?
thanks ,

Hi Rakesh ,
Are you talking about a formula variable of type Customer Exit??? - Yes
Then if you have mentioned it as Number then it can only hold Numerical value and nothing else. - I dont see anyother option (dat type) which suits my rek. I need to declare a variable where user can enter a value like 2,3 ...12. And I have to use this variale in my customer exit code.
Diffferent options availble in BEx for a formula variable are ,
Number , Amount , Quantity , Price.
And in my customer exit I'm using as Y = X + 'My customer Exit Variable'.
Can you please give me your thoughts.
thanks alot.

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Serious system error while executing the query: java.lang.OutOfMemoryError

From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?

In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
 <ns0:field1>1</ns0:field1>
 <ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
 <ns0:field1>2</ns0:field1>
 <ns0:field10>test2</ns0:field10>
</ns0:createTemp>
 </ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Input Value long enough for date format ,Error in executing parallel query

Hi,
My Table: ANML( ID, STATUS,B_DATE,B_MONTH,B_YEAR, DEATH_DATE)
status 1 for alive and 2 for dead.
i wrote a view to get age.
as
create or relace view view1 as
select top."ID",top."STATUS",top."DOB",top."DEATH_DATE",top."ANML_AGE",top."DAYSDIFF",
CASE
WHEN anml_age < 1
THEN 'D'
ELSE 'M'
END age_unit,
CASE
WHEN anml_age < 1
THEN TO_CHAR (daysdiff || ' Day(s)')
WHEN anml_age < 12
THEN TO_CHAR (anml_age || ' Month(s)')
WHEN MOD (anml_age, 12) = 0
THEN TO_CHAR (ROUND (anml_age / 12, 0) || ' Year(s) '
ELSE TO_CHAR ( ROUND (anml_age / 12, 0)
|| ' Year(s) '
|| MOD (anml_age, 12)
|| ' Month(s)'
END age_string
from
(SELECT a.*,
CASE WHEN status IN ( 1)
THEN FLOOR(MONTHS_BETWEEN(TRUNC(SYSDATE),dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(MONTHS_BETWEEN(death_date,dob))
END anml_age,
CASE WHEN status IN (1)
THEN FLOOR(TRUNC(SYSDATE)-TRUNC(dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(TRUNC(death_date) - TRUNC(dob))
END daysdiff
from (
SELECTanml.id, status,
TO_DATE ( DECODE (b_date,
NULL, 1,
b_date
|| '-'
|| DECODE (b_month,
NULL, 1,
b_month
|| '-'
|| b_year,
'dd-mm-yyyy'
) DOB,
death_date
FROM anml
WHERE b_year IS NOT NULL
) a) top
when i tried to fetch all values from view its working fine.
But when i tried to fetch values based on condition like as follows,
select * from view1 where anml_age > 20 and anml_age<30
I am getting error like:
Input Value long enough for date format and Error in executing parallel query
Please tell me wht is wrong.

Here is your formatted code
create or relace view view1 as
select top."ID",top."STATUS",top."DOB",top."DEATH_DATE",top."ANML_AGE",top."DAYSDIFF",
CASE
WHEN anml_age < 1
THEN 'D'
ELSE 'M'
END age_unit,
CASE
WHEN anml_age < 1
THEN TO_CHAR (daysdiff || ' Day(s)')
WHEN anml_age < 12
THEN TO_CHAR (anml_age || ' Month(s)')
WHEN MOD (anml_age, 12) = 0
THEN TO_CHAR (ROUND (anml_age / 12, 0) || ' Year(s) '
ELSE TO_CHAR ( ROUND (anml_age / 12, 0)
|| ' Year(s) '
|| MOD (anml_age, 12)
|| ' Month(s)'
END age_string
from
(SELECT a.*,
CASE WHEN status IN ( 1)
THEN FLOOR(MONTHS_BETWEEN(TRUNC(SYSDATE),dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(MONTHS_BETWEEN(death_date,dob))
END anml_age,
CASE WHEN status IN (1)
THEN FLOOR(TRUNC(SYSDATE)-TRUNC(dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(TRUNC(death_date) - TRUNC(dob))
END daysdiff
from (
SELECTanml.id, status,
TO_DATE ( DECODE (b_date,
NULL, 1,
b_date
|| '-'
|| DECODE (b_month,
NULL, 1,
b_month
|| '-'
|| b_year,
'dd-mm-yyyy'
) DOB,
death_date
FROM anml
WHERE b_year IS NOT NULL
) a) top

Error when executing a query in ECC

Similar Messages

Maybe you are looking for