Error when executing call list

Hi, experts!
I'm working with SAP CRM 7.0 and have the following situation.
I've generated call list and as it is in SAP standard there were generated business transaction to each business partner in this call list, in my case it's 'ZPCL'. Then IC agents begin executing call list manualy. When IC agent choose the business partner in call list, then chooses the next in activity clipboard after accepting business partner IC agent can see two business transactions, but must only one. The first is for business partner he chose first, and the second is for business partner IC agent accepted. And this is wrong. Couldn't you advise me some solution or may be SAP note to correct such behaviour of the system?
Thanks in advance,
Andrew.

Similar Messages

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Error when executing statement for table/stored proc

Hi All,
      I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
     In my stored procedure I have three insert statements to insert rows in to 3 tables.
    This stored procedure is working fine for two insert statements i.e,
         For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
    when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
<i><b>Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
<i><b>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
   Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
<i><b> Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.</b></i>
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
                  This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

SQL2005 cluster error MDB-05053 Errors when executing sql command: p nr="

Hi all,
We are migrating from 32 bit to x64 bit machines. SQL 2005 database on windows 2003.
I am trying to install E 4.7-200 SR1 on the clustered nodes. The installation manuals for 4.7 are very old and there is nothing for SQL2005 installation.
Now that some how we were able to have SQL up and running in clustered environment (It only took 10 days), After installing CI, I am not able to deploy the database and database creation phase is failing with the following error:
MDB-05053 Errors when executing sql command: <p nr="0"/>.
I am heavily relying on our server managment team on clustering and hoping they have done a good job, However I need some guidelines which can help me in verifying what they have done is correct and meets SAP and SQL requirments and issues we are facing is actually install problems not cluster.
SAP install manuals are not detailed in this regards. Also manuals are out dataed and they only show the sql 2000 clustering pre-requisit for 4.7 installls.
Can any one with clustering experience please help.
Calling out NPC, As his sql installation and upgrade manual has helped me with stand alone installs, Hoping he has some thing for clustering as well.
Regards,
KG

Hi,
What installation CD/DVD are you using?
Try look at SAP note [924288|https://service.sap.com/sap/support/notes/924288],
and note [969699|https://service.sap.com/sap/support/notes/969699],
and note [967124|https://service.sap.com/sap/support/notes/967124],
and note [106275|https://service.sap.com/sap/support/notes/106275].
In special the last note say at the end:
"3. You must use the 51031444 CD to install Enterprise 4.7 on an x64 platform with SQL Server 2005. This CD installs the central instances and database instances. To convert the A and B nodes in MSCS, use the SAP NetWeaver 04 SR1 installation master CD or DVD."
Hope this helps
Regards
Rolf

Error when executing Integration Gateway service

Hello,
I created a service on IGW to expose an oracle db as odata but i'm getting the following error when i call it from the browser:
<error><code/><message xml:lang="en-US">An exception occurred.</message></error>
The service itself is working. Its destination is reachable from the IGW's management cockpit test, and its url returns the service description when executed from the browser. The error happens when i try to access an entity within the service, as in:
https://smp3url:8083/gateway/odata/SIST/ODATATEST;v=1/Solicitacao/
I checked SMP's logs and found two possibly related error entries. The first is from execution of my custom script. I had to create a script to map the entity set names to actual table names in the database (their full name: schema + table name).
2015 04 07 15:41:29#0-300#ERROR#com.sap.gateway.ip.core.customdev.processor.IGWScriptProcessor##anonymous#http-bio-8083-exec-5###[Gateway][TECHNICAL][TechnicalError]:This is first log
2015 04 07 15:41:29#0-300#ERROR#com.sap.gateway.core.odata4sap.ODataErrorCallbackImpl##anonymous#http-bio-8083-exec-5###handleError(): failed to serve request for URI https://smp3url:8083/gateway/odata/SIST/ODATATEST;v=1/Solicitacao, message = An exception occurred.
Thanks,

Thanks for the tips guys.
Jitendra, i can't connect to my database with that string format. I need to use a tns name format, such as:
jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MyHost)(PORT=MyPort))(CONNECT_DATA=(SERVICE_NAME=MyOracleSID)))
I couldn't find a way to define the schema for this. I think i've passed this issue anyway. After the implementation of the custom script i stopped receiving an "Oracle - ORA-00942 : table or view does not exist" error from the service.
Midhun, i increased the log level but i couldn't find anything interesting in SMP's server logs. Still, i found this error message on the troubleshooting session of IGW's cockpit:
com.sap.gateway.core.api.provider.data.GenericODataProcessor: readEntitySet failed: entity set = Solicitacao, content type = application/xml;charset=utf-8, message = org.apache.olingo.odata2.api.ep.EntityProviderException: An exception occurred.
Is it a problem with the service itself then? This is interesting because i'm getting these errors when generate the integration content on my project. I was actually ingnoring them because the deploy was still successful.

Error when executing statement for table/stored proc DB2 - Data Truncation

Hi,
I have one call sp in XI with n parameters int and two parameters out.
well, to implement the interface gives the following error
com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPSAPAR9' (structure 'Statement'): java.sql.SQLException: The number of parameter values set or registered does not match the number of parameters
Thanks for your help
Ximena
Edited by: Ximena Gonzalez on Feb 19, 2008 11:50 AM
Edited by: Ximena Gonzalez on Feb 20, 2008 12:17 PM

My Error is change
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAPPRG.SPSAPAR9' (structure 'Statement'): java.sql.DataTruncation: Data truncation
but de change DT SP
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:AlistReqDet2_MT xmlns:ns1="urn:proxl:tmuc:proxl01:AlistReqItems">
<Statement>
<SPSAPAR9 action="EXECUTE">
<table>SAPPRG.SPSAPAR9</table>
<ISAPNU1 isInput="TRUE" type="STRING">0080000353</ISAPNU1>
<ISAPEM1 isInput="TRUE" type="STRING">'LU'</ISAPEM1>
<ISAPC05 isInput="TRUE" type="STRING">15353</ISAPC05>
<ISAPSEC isInput="TRUE" type="STRING">10</ISAPSEC>
<ISAPLOT isInput="TRUE" type="STRING">'lats'</ISAPLOT>
<ISAPCA1 isInput="TRUE" type="STRING">10</ISAPCA1>
<ISAPCA2 isInput="TRUE" type="STRING">10</ISAPCA2>
<ISAPKIL isInput="TRUE" type="STRING">10</ISAPKIL>
<ISAPES1 isInput="TRUE" type="STRING">'T'</ISAPES1>
<ISAPSW isOutput="TRUE" type="STRING" />
</SPSAPAR9>
</Statement>
</ns1:AlistReqDet2_MT>

JCS-122017 Error When refreshing Application List

JCS-122017 Error When refreshing Application List
This issue started occurring when we migrated CPS from M28 to M33
We currently have M33.45 in Dev and are still experiencing the same error when refreshing the application list.
To replicate the issue, I can login, click applications, click the redwood folder, then click the refresh button within CPS and receive the below error.
[Errors found]      11:35:27 AM: JCS-122017: Trying to use non-attached object Application:2,472
Has anyone else had this issue, this appears to happen to all of the application lists when refreshing
JCS-122017: Trying to use non-attached object Application:2,472
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkHasSession(BaseSchedulerEntityImpl.java:853)
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkCanRead(BaseSchedulerEntityImpl.java:859)
     at com.redwood.scheduler.model.NamedRootObjectImpl.getName(NamedRootObjectImpl.java:143)
     at com.redwood.scheduler.ui.meta.page.MetaOverviewPage.getTabName(MetaOverviewPage.java:227)
     at com.redwood.scheduler.ui.meta.page.MetaTabPage.setTabPageNameType(MetaTabPage.java:94)
     at com.redwood.scheduler.ui.meta.MetaTabPageSetNameAction.performModelAction(MetaTabPageSetNameAction.java:49)
     at com.redwood.scheduler.ui.meta.MetaModelAction$ModelActionImpl.performModelAction(MetaModelAction.java:62)
     at com.redwood.scheduler.ui.model.impl.FormImpl.modelActions(FormImpl.java:730)
     at com.redwood.scheduler.ui.model.impl.LifeCycle.run(LifeCycle.java:226)
     at com.redwood.scheduler.ui.servlet.Servlet.handleRequest(Servlet.java:98)
     at com.redwood.scheduler.ui.servlet.Servlet.doPost(Servlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.redwood.scheduler.module.impl.ModuleFilter.doFilter(ModuleFilter.java:157)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.security.filter.SecurityFilter.doFilter(SecurityFilter.java:613)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.servlet.RequestCharsetFilter.doFilter(RequestCharsetFilter.java:197)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The error is in the admin guide
No timezone could be found to calculate this TimeWindowElement. This means
that the object that includes the TimeWindow should set the TimeZone to use
for the calculation of the TimeWindow, or a TimeZone must be set on the
TimeWindow or TimeWindowElement.
I do not see how this would occur within the application list.
Thanks,
Edited by: Nick Katsoulis on Jan 17, 2012 6:39 PM

Hi Nick,
I think you have already received this info via OSS - In case anyone else encounters this same problem - This issue will be fixed in a future version of CPS, planned for the M33-April release.
David

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Error when executing DBMS_ERRLOG pkg through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
it throws the following error...
ORA-01031: insufficient privileges
Please let me know the solution at the earliest.
Thanks.
-Saravanan

duplicate post
Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: <u>[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name '<b>ZTEST</b>'.</u>
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
   <STATEMENT>
      <TEST action="INSERT">
         <table>ZTEST</table>
         <access>
            <ROLLNO>123</ROLLNO>
            <FIRSTNAME>ABC</FIRSTNAME>
            <LASTNAME>XYZ</LASTNAME>
         </access>
      </TEST>
   </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
   <STATEMENT>
      <ZTEST action="INSERT">
         <access>
            <ROLLNO>123</ROLLNO>
            <FIRSTNAME>abc</FIRSTNAME>
            <LASTNAME>XYZ</LASTNAME>
         </access>
      </ZTEST>
   </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Error when executing call list

Similar Messages

Maybe you are looking for