Error,when executing "contents in the cube & a report in the bex analyser"

Hi,
If i execute a cube contents,i am getting this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
When we execute a query in the BEX, we got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar.

Hi Dhanya,
thanks for your quick response,
it is helping more for me,
but i have some query's for this.
ie i made proper installation for activation 0infoprov(BusinessContent info objective) at BI Content Level. but it appears as inactive mode at modeling level. when,i made activation of 0infoprov, it is asking "0LOGSYS" must be an attribute, but i given "0LOGSYS" as attribute for this 0INFOPROV, however it shows some other errors at the time of activation, it appears as Inactive mode only, means it is not activating at this modeling level.
At the time of activating "0infoprov" it is asking, insert the "0logsys" must be an attribute.why?
the info objective 0infoprov is appears as inactive mode at modeling level0.
please let me know,what will be the problems for activating "0infoprov".
plz respond quickly.
kumar.
Edited by: kumar kumar on Dec 10, 2008 5:35 AM

Similar Messages

Error when executing query in the Web Analyzer...

Hi All,
I am using 2004s and when I try to execute the query in the BEX browser I get the following error. It works well in the Bex analyzer. Do I need to have some java plug ins for this to work?
http://bi6.domain.com:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex%3FQUERY
Thanks,
Arthur.

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

ProcessdpCommandEx error when adding or removing object from WebI report (based on BEX query) query panel object list

Hi,
We have WebI reports build on BEX using BAPI connectivity. When we are trying to add a object in query panel in a existing report we are getting this ProcessdpCommandEx error. But error does not appear when we add at the end of the list of objects already added.
Can you calrify whether this could be some setting issue or it is a known bug?
Can you share SAP Note No in case it is a known bug?

Hi Avijit,
This error occurs in case of any failure in the connectivity. It is like the data providers are not getting processed.
You have mentioned that the issue does not come with newly created reports
Are you creating new reports on migrated universe or a newly created universe?
If issue only comes with migrated universe, please check if the connection has been migrated properly and required middleware and database connectors are in place.
If connections are in place, try importing and exporting the universe once and check.
In case, new report works fine with migrated universe, then you can simply try to re-point the universe by editing the query and can run it again and check.
Regards,
Yuvraj

Runtime Error when executing Query in the web

Hello,
when i try to execute a query on the web, i get the error
Exception in BI runtime
Log ID: 005056BD15DA005E000000A900000A3400043C8F00E4DD8B
Initial cause
Message:
'user' missing
Stack trace:
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
Message:
No connection possible to BI master system VB0CLNT800
Stack trace:
com.sap.ip.bi.base.service.connection.ConnectionException: No connection possible to BI master system VB0CLNT800
Can anyone please tell me , how to fix this ..
Thanks
Raj

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Has anybody gotten an error when trying to unzip the Encore Content zips file? How did you fix?

Has anybody gotten an error when trying to unzip the Encore Content zips file? How did you fix?

You may have a corrupt download... did you download again?

I keep receiving an error 8268 when downloading content from the iTunes Store. Does anyone have solution for it?

I keep receiving an error 8268 when downloading content from the iTunes Store. Does anyone have solution for it?

contact iTunes Customer support to resolve this issue. They will provide you a fresh copy of the song

ORA-29902 Error when executing context query

We sometimes get the following error when executing a search based on keywords entered by a user:
<BLOCKQUOTE>quote:<HR>Error generating context stmt ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: interMedia Text error: DRG-50901: text query <HR></BLOCKQUOTE>
A demonstration of the error can be seen by going to the main
http://technet.oracle.com technet page and then performing a site search. Type in any of the following search phrases:
Oracle and not Microsoft
not Microsoft
and database
In my brief experimentation, the presence of any of
not, and, or
at the beginning of the keywords, or next to each other 'and not' within the keywords set causes the above oracle error.
OK, I could train the users not to do this, but with the potential for every net user on the planet using my site, it might take me some time to speak to all of them.
So how do I stop Intermedia from throwing up the error? I have written a quick parser to try to strip out offending entries, but that is not, imho, a good solution, as I do not know all the rules that will break it.
tia

You need to write a text query parser. Check the Query Translator code samples from http://technet.oracle.com/sample_code/products/text/content.html

Unknown error when executing MDX when refreshing Crystal Report with BEx

Hello Experts,
I have created a Crystal Report (Crystal 2008 SP1) with BEx Query (7.10) and have been able to refresh successfully when the SAP_ALL authorization is included in my user role. I don't want my end users to have SAP_ALL so I created a role and assigned the authorizations recommended in the SAP Integration Kit for BusinessObjects 3.1 Install Guide.
When I run the report as one of the users assigned to my new role I get the following error in the trace file.
ERROR: .\crdb_bwmdx_execution.cpp [200]: l_bapiGetStreamInfo failed with return code RFC_RC = 0 Exception: BAPI Error: BAPI Error #:0
Unknown error when executing MDX
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
I tried all the Fix Packs (ie 1.1., 1.2 and 1.3) for XI 3.1 Integration Kit to try resolving the error but it didn't work.
The same query works fine in BEx Web when running as one of the users in the new role I created for Crystal Report users.
Are there any other Authorizations that I need to include in the role?
Cheers.
Paul.

We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error,when executing "contents in the cube & a report in the bex analyser"

Similar Messages

Maybe you are looking for