Error When Executing DTP

Internal error: Invalid Aggregation Info No entry for InfoObject: 0CURTYPE - contact SAP
Message no. RSTRAN000.
when i am loading data to DSO using Data Transfer Process i am getting this error. Transformation is also in Active Mode. I dont know why i am getting this error. Can anybody help me regarding this one.
Regards,
Mahesh.

Hi Anil,
With respect to the note 1020813 - we have already installed with this package BI Patch 13 or SAPKW70013. After that also i am getting this error. Can u Please guide me if u know about any solution regarding this one.
Regards,
Mahesh.

Similar Messages

Unknown error when executing DTP

Hello,
I am getting this strnge error, that i cannot seem to overtake. I am executing a DTP but it is erroneous as i am getting in one datapackage this error:
Updating attributes for InfoObject ZDMCPCC : 50002 -> 25001 Data Records - Not Ok
- Start of Master Data Update - Ok
- Check Duplicate Key Values - Ok
- Check Data Values - Ok
- Process Time-Dependent Attributes - Ok
- Process Time-Independent Attributes - Ok
- Generates Navigation Data - Ok
- Update Master Data Attributes - Ok
- End of Master Data Update - Ok
(Here the DTP should stop, but below the last ok message i get this with the error signal behind)
- Node Number97
Does anyone knows what maybe causing this error?
Thanks
Vitor Hugo Ferreira

We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.

ABAP Dump when executing DTP

Dear gurus:
       I just faced an annoying problem when executing DTP in t-code RSA1. It appears an ABAP dump here. The ABAP dump is briefly shown below. And I found that it seems to be an authorization problem, because when I use a new account which has SAP_ALL authorization, then it works. So it may lack of some authorizations, but it's hard to figure it out. T-code su53 cannot check it properly. Need your help and thanks a lot.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          2007.06.20 11:17:30
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Invalid program status
     Long text of error message:
     Technical information about the message:
     Message class....... "RSBK"
     Number.............. 299
     Variable 1.......... " "
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "

Hai Wei,
This dump is due missing of OCX files while installing SAP GUI Front end just find out the exact files and copy and paste them in the Front end files files then ur prob will be solved.......
If in case any issues let me know.
Regards
Madhavi

Error while executing DTP

Hi gurus,
Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
1.An error occurred while executing a transformation rule:
The exact error message is:
The argument 'EA' cannot be interpreted as a number
The error was triggered at the following point in the program
GP4D35STLXQI3SHIVNQC2FSJ7MB 791
2.The data record was filtered out because data records with the same key
have already been filtered out in the current step for other reasons and
the current update is non-commutative (for example, MOVE). This means
that data records cannot be exchanged on the basis of the semantic key.
Please guide me accordingly.
Regards
Amar.

Hi
While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
(Choose Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
Hope it helps and clear

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Error when executing DBMS_ERRLOG pkg through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
it throws the following error...
ORA-01031: insufficient privileges
Please let me know the solution at the earliest.
Thanks.
-Saravanan

duplicate post
Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

SQL2005 cluster error MDB-05053 Errors when executing sql command: p nr="

Hi all,
We are migrating from 32 bit to x64 bit machines. SQL 2005 database on windows 2003.
I am trying to install E 4.7-200 SR1 on the clustered nodes. The installation manuals for 4.7 are very old and there is nothing for SQL2005 installation.
Now that some how we were able to have SQL up and running in clustered environment (It only took 10 days), After installing CI, I am not able to deploy the database and database creation phase is failing with the following error:
MDB-05053 Errors when executing sql command: .
I am heavily relying on our server managment team on clustering and hoping they have done a good job, However I need some guidelines which can help me in verifying what they have done is correct and meets SAP and SQL requirments and issues we are facing is actually install problems not cluster.
SAP install manuals are not detailed in this regards. Also manuals are out dataed and they only show the sql 2000 clustering pre-requisit for 4.7 installls.
Can any one with clustering experience please help.
Calling out NPC, As his sql installation and upgrade manual has helped me with stand alone installs, Hoping he has some thing for clustering as well.
Regards,
KG

Hi,
What installation CD/DVD are you using?
Try look at SAP note [924288|https://service.sap.com/sap/support/notes/924288],
and note [969699|https://service.sap.com/sap/support/notes/969699],
and note [967124|https://service.sap.com/sap/support/notes/967124],
and note [106275|https://service.sap.com/sap/support/notes/106275].
In special the last note say at the end:
"3. You must use the 51031444 CD to install Enterprise 4.7 on an x64 platform with SQL Server 2005. This CD installs the central instances and database instances. To convert the A and B nodes in MSCS, use the SAP NetWeaver 04 SR1 installation master CD or DVD."
Hope this helps
Regards
Rolf

Error When Executing DTP

Similar Messages

Maybe you are looking for