Error when executing SAP_PD with rule for infotype

HI,
I am doing create organizational unit using SAP_PD generic service. I have defined a rule in HRASR_DT transaction to restrict address info type 1028. Infotype should trigger based on the conditions only. when i execute the complete form and click on thei am getting the error
"Field STEP_OBJECT_GUID is required for the evaluation of rule " ..Please advise me..
Thanks and Regards,
rama.

Hi Rama,
Thanks this helped me to solved the error.
I have problem while creating A 011 realtionship.
1) When I try to do cost center assignment A 011 relation ship using SAP_PD I have to enter coster center + controlling area on portal, otherwise I get error invalid cost center.
Rama,
By any changes have you worked on SAP_PA services, I have to do hiring of employee using SAP_PA services, but I get error u201CEnter personnel number error on portalu201D I have looked at the config done in standered Form Scenario (S_HRPA_US_REHIRE_1 in which SAP have done the hiring action config.) , but still same error.
Please guide.
Thanks & Regards,
Kavita Barde

Similar Messages

Error when executing report with large data selection in Infoview

Hello,
This is regarding Error we are facing in BO system.
We have installed:
Business Object Enterprise XI 3.1
Crystal report 2008
When we are trying to execute report in BO INFOVIEW on production system, we are facing following error (After 10 mins of execution).
========================================================================================
Windows Internet Explorer
Stop running this script?
As script on this page is causing Internet Explorere to tun slowly.
If it continues to run, your computer might become
unresponsive.
========================================================================================
Please note: We are getting data via Crytal report. Only, execution in infoview is giving error.
If we are executing same report with less data(E.g a days data) then we are getting output in Infoview.
However, when we execute report with more data (6 months data) then we are getting attached error after 10 min of execution time.
Helpfull reply will be awarded.
Regards.
Edited by: Nirav Shah on Dec 14, 2010 6:19 AM

If it is indeed a server timeout issue, the following document might be usefull: http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/606e9338-bf3e-2b10-b7ab-ce76a7e34432
It's about Troubleshooting Time-outs in BusinessObjects Enterprise XI, but a lot is still applicable.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken

Error when executing VI with "Invoke Node" in loop

Hello,
please check if this is possible what i am doing here or if there is a better way to do it.
The goal is to have a VI that i can start in TestStand which is then running in a loop until i set a global variable.
I do this currently with:
1.) Starting the VI with "Invoke Node" (see screenshot 01)
2.) This Vi is then running all the time in a loop until the global for exiting is True (screenshot 02)
3.) Then i have another VO to set the Quit-variable to true
Normally this works as it should, but sometimes i get the error-message:
Invoke Node in NameOfTheViCalledInTestStand.vi
Method Name: Run VI
VI Path: NameOfTheViThatContainsTheInvokeNode.vi
LabVIEW: Das VI befindet sich in einem für diese Operation unzulässigen Zustand.
The question is: what does this error mean and what better ways are there to do what i want to.
Perhaps for better understanding, the VI which runs in a loop executes dll-functions to enable and disable an ample-tower to make a light blinking.
And because there is no function "blink", i have to make it on off on off on off....
So the vi loops and makes on off until i say "quit" then blinking stops.
Thanks for any ideas
Attachments:
01_InvokeNode.jpg ‏8 KB
02_ViRunsInLoop.jpg ‏23 KB

I cant´t do this "Try changing the "Run" node
to "Wait Until Done" = True." because then the TestStand-Step is
hanging until the loop is finished.
I only want to start the "blinking" and the continue normally in the sequence.
To
avoid that the vi with the "Invoke Node" is started twice a have a vi
above it whick checks with the globalVariable "IsCurrentlyBlinking" if
the start is allowed.
If IsCurrentlyBlinking= True then nothing happens.
So normally it can´t happen that it starts twice. Only if the GlobalVariables are not correct.
The
variable "IsCurrentlyBlinking"is set to TRUE in the subvi before the
loop starts and after the loop is finished its set to FALSE in the
subvi.
Attachments:
03_CheckStart.jpg ‏16 KB

Error when executing query with variables in excel

When I execute a query in excel, it gives some errors if it has some variables (From Date, To Date etc):
Error Specify a value for variable From Date
Error Specify a value for variable To Date
I need to execute the query and then save a view. I want to do this in excel as I am not able to save a view if I execute in a web browser.

Hi Sanjeev.
Of course Excel supports input of variable values.
What version of BW/BI both backend and frontend are you using?
Please check if you can execute the query in TA RSRT. You could try to generate the query again here.
Hope it helps.
BR
Stefan

Error when executing Query with user date settings = mm/dd/yyyy

Hi all,
I created a remote cube with datasource = TCURR table with proper conversion of the date etc.
The query on top of this remote cube works fine if my user date settings is set to dd.mm.yyyy
But when a user in USA, with user date settings = mm/dd/yyyy, executes the same query, they get a message
SYST: Date 31/05/2006 not expected.
Message no. FGV004
The input variable on the Query is on 0CALMONTH.
This message appears immaterial of what calmonth input I give.
has anyone encountered this error? if yes, what could be the solution please?
thanks
Emmanuel

Hi,
This is in regard to the user settings maintained in transaction /nsu3.Please follow the below link.
http://web.mit.edu/sapr3/docs/webdocs/getstarted/gsSETTINGS.html
You need to change the settings as required.
Hope this helps.
Thank you,
Prem

FORMATTING ERROR when executing smartform with message SSFcomposer 159

Hi all,
I have created a custom smartform.When i execute it in tcode SMARTFORMS,i get the error "FORMATTING ERROR" "GRAPHIC CANNOT BE DISPLAYED".
I have a image file(LOGO) which is used in this Smartform.However this problem is faced only in the QUALITY system.In DEV system,the Smartform works fine.
PLease advise.
Thanks.

Hi,
is the logo also in the QTY system.
Che the name of the logo, then go in transaction SE78 and check if the logo exist.
Otherwise, create a transaport (always from SE78 trx) and transport the logo in the other systems.
Hope it helps
Bye
Andrea

How can I see error when execute UPDATE with BULK COLLECT

Hi
I have a code
   CURSOR c_renov_eleg IS
        SELECT t2.ROWID
          FROM mytable t2
     WHERE BLA BLA BLA
OPEN c_renov_eleg;
      LOOP
        FETCH c_renov_eleg BULK COLLECT
          INTO w_rowid LIMIT 1000;
        FORALL i IN 1 .. w_rowid.COUNT
          UPDATE mytable
             SET id_baixa_elegibilidade = K_SCNOB_BXA_RENOVACAO,
                  column01         = arr_ciclo(1),
                 dt_ultima_atualizacao = SYSDATE,
                 cd_usuario_atualizacao = USER
           WHERE ROWID = w_rowid(i);
        COMMIT;
        EXIT WHEN c_renov_eleg%NOTFOUND;
      END LOOP;How can I to sse when and where have some error ? , in Exception return what record ?

How can I to sse when and where have some error
?Have a look at
[url=http://download.oracle.com/docs/cd/B28359_01/appd
ev.111/b28370/tuning.htm#i49099]Handling FORALL
Exceptions (%BULK_EXCEPTIONS Attribute).btw. just never ever commit in a for loop ;)
(Tubby is just too fast ;))
Hi , thank all
btw. just never ever commit in a for loopWhen I must to COMMIT using BULK COLLECT ?

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Error when executing statement for table/stored proc DB2 - Data Truncation

Hi,
I have one call sp in XI with n parameters int and two parameters out.
well, to implement the interface gives the following error
com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPSAPAR9' (structure 'Statement'): java.sql.SQLException: The number of parameter values set or registered does not match the number of parameters
Thanks for your help
Ximena
Edited by: Ximena Gonzalez on Feb 19, 2008 11:50 AM
Edited by: Ximena Gonzalez on Feb 20, 2008 12:17 PM

My Error is change
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAPPRG.SPSAPAR9' (structure 'Statement'): java.sql.DataTruncation: Data truncation
but de change DT SP
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:AlistReqDet2_MT xmlns:ns1="urn:proxl:tmuc:proxl01:AlistReqItems">
<Statement>
<SPSAPAR9 action="EXECUTE">
<table>SAPPRG.SPSAPAR9</table>
<ISAPNU1 isInput="TRUE" type="STRING">0080000353</ISAPNU1>
<ISAPEM1 isInput="TRUE" type="STRING">'LU'</ISAPEM1>
<ISAPC05 isInput="TRUE" type="STRING">15353</ISAPC05>
<ISAPSEC isInput="TRUE" type="STRING">10</ISAPSEC>
<ISAPLOT isInput="TRUE" type="STRING">'lats'</ISAPLOT>
<ISAPCA1 isInput="TRUE" type="STRING">10</ISAPCA1>
<ISAPCA2 isInput="TRUE" type="STRING">10</ISAPCA2>
<ISAPKIL isInput="TRUE" type="STRING">10</ISAPKIL>
<ISAPES1 isInput="TRUE" type="STRING">'T'</ISAPES1>
<ISAPSW isOutput="TRUE" type="STRING" />
</SPSAPAR9>
</Statement>
</ns1:AlistReqDet2_MT>

Unknown error when executing MDX when refreshing Crystal Report with BEx

Hello Experts,
I have created a Crystal Report (Crystal 2008 SP1) with BEx Query (7.10) and have been able to refresh successfully when the SAP_ALL authorization is included in my user role. I don't want my end users to have SAP_ALL so I created a role and assigned the authorizations recommended in the SAP Integration Kit for BusinessObjects 3.1 Install Guide.
When I run the report as one of the users assigned to my new role I get the following error in the trace file.
ERROR: .\crdb_bwmdx_execution.cpp [200]: l_bapiGetStreamInfo failed with return code RFC_RC = 0 Exception: BAPI Error: BAPI Error #:0
Unknown error when executing MDX
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
I tried all the Fix Packs (ie 1.1., 1.2 and 1.3) for XI 3.1 Integration Kit to try resolving the error but it didn't work.
The same query works fine in BEx Web when running as one of the users in the new role I created for Crystal Report users.
Are there any other Authorizations that I need to include in the role?
Cheers.
Paul.

We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.

Error when executing statement for table/stored proc. : ORA-00911

Hi All,
I am posting IDOC->XI->JDBC, approx 5000 Idocs.
But few messages are giving following error in XI-_SXMB_MONI
Can any one guide me what is the cause of error? I check whole Idoc data I am not able to see bad character? can any once guide me what are the bad character in XML to post data in oracle? so that i can search in XML and how to avoide this error.
"com.sap.aii.af.ra.ms.api.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'HRP1001' (structure 'INSERT_PAD34'): java.sql.SQLException: ORA-00911: invalid character"

> I am talking about following IDOC.<ZRMD_A06> ->
> <E1PLOGI SEGMENT="1">-> <E1PITYP SEGMENT="1"> ->
> <E1PAD34 SEGMENT="1"> -><PROZT>0.00 #</PROZT>.
> Can we remove this # during message mapping in XI??
sure you can remove it using Replace function or by writing UDF.
as I am seing # is last character..so remove # with " " (single space) and then use the TRIM fucntion.
Thanks
Farooq.
*Rewards points if you find it useful*

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

ORA-29902 Error when executing context query

We sometimes get the following error when executing a search based on keywords entered by a user:
<BLOCKQUOTE>quote:<HR>Error generating context stmt ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: interMedia Text error: DRG-50901: text query <HR></BLOCKQUOTE>
A demonstration of the error can be seen by going to the main
http://technet.oracle.com technet page and then performing a site search. Type in any of the following search phrases:
Oracle and not Microsoft
not Microsoft
and database
In my brief experimentation, the presence of any of
not, and, or
at the beginning of the keywords, or next to each other 'and not' within the keywords set causes the above oracle error.
OK, I could train the users not to do this, but with the potential for every net user on the planet using my site, it might take me some time to speak to all of them.
So how do I stop Intermedia from throwing up the error? I have written a quick parser to try to strip out offending entries, but that is not, imho, a good solution, as I do not know all the rules that will break it.
tia

You need to write a text query parser. Check the Query Translator code samples from http://technet.oracle.com/sample_code/products/text/content.html

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Error when executing SAP_PD with rule for infotype

Similar Messages

Maybe you are looking for