Error when executing standard WDA FITV_POWL_TRIPS

hi ,
when i am executing WDA FITV_POWL_TRIPS following error is coming
some logon error message is coming , that is,
service cannot be reached.
URL http://...../sap/bc/webdynpro/sap/fitv_powl_trips call was terminated because the corresponding service is not available.
The termination occurred in system D10 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
i think i have to activate the service or something like that from some tcodes.
please reply.
regards,
Yogesh

Hello,
Check if the [Web Dynpro ABAP Configurations|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm] are correct, specially the [SICF Services|http://help.sap.com/saphelp_nw04s/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/content.htm].
Regards.

Similar Messages

Error when execute a WDA: termination type: RABAX_STATE

Hello,
I created a WDA that into the event button (on click) call a function
DATA val1 TYPE I.
DATA val2 TYPE I.
DATA val3 TYPE I.
val1 = 12.
val2 = 13.
CALL FUNCTION 'ZGB_FUNC01'
    EXPORTING
        VAL_A       = val1
        VAL_B       = val2
     IMPORTING
        VAL_C       = val3.
The Function Module (ZGB_FUNC01) I tested preview in a program and this it is execute correctly. But when I use this call function in the WDA and execute the application from the browser show an exception:
The ABAP call stack was:
Method: ONACTIONGET_SUMA of program /1BCWDY/0O2TMLYG1PWHANJDK87W==CP
Method: ONACTIONGET_SUMA of program /1BCWDY/0O2TMLYG1PWHANJDK87W==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0O2TMLYG1PWHANJDK87W==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
I hope that you can help me.
Greetings.
--erva

Hi,
Execute the WDA Application once again, when it dumps, go to transaction ST22, Click on Runtime Errors. Double click on your Error in ALV, In the next screen under 'ABAP developer view ', double click on source code Extract. It will point to the error line with indicator >>>>>>>.
If it is at your Function module, check the parameter types. I guess it is due to not instatiating of your context node.
hope this helps u.,
revert back for any further clarifications,
Thanks & Regards,
Kiran.

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Error when executing DBMS_ERRLOG pkg through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
it throws the following error...
ORA-01031: insufficient privileges
Please let me know the solution at the earliest.
Thanks.
-Saravanan

duplicate post
Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

SQL2005 cluster error MDB-05053 Errors when executing sql command: p nr="

Hi all,
We are migrating from 32 bit to x64 bit machines. SQL 2005 database on windows 2003.
I am trying to install E 4.7-200 SR1 on the clustered nodes. The installation manuals for 4.7 are very old and there is nothing for SQL2005 installation.
Now that some how we were able to have SQL up and running in clustered environment (It only took 10 days), After installing CI, I am not able to deploy the database and database creation phase is failing with the following error:
MDB-05053 Errors when executing sql command: .
I am heavily relying on our server managment team on clustering and hoping they have done a good job, However I need some guidelines which can help me in verifying what they have done is correct and meets SAP and SQL requirments and issues we are facing is actually install problems not cluster.
SAP install manuals are not detailed in this regards. Also manuals are out dataed and they only show the sql 2000 clustering pre-requisit for 4.7 installls.
Can any one with clustering experience please help.
Calling out NPC, As his sql installation and upgrade manual has helped me with stand alone installs, Hoping he has some thing for clustering as well.
Regards,
KG

Hi,
What installation CD/DVD are you using?
Try look at SAP note [924288|https://service.sap.com/sap/support/notes/924288],
and note [969699|https://service.sap.com/sap/support/notes/969699],
and note [967124|https://service.sap.com/sap/support/notes/967124],
and note [106275|https://service.sap.com/sap/support/notes/106275].
In special the last note say at the end:
"3. You must use the 51031444 CD to install Enterprise 4.7 on an x64 platform with SQL Server 2005. This CD installs the central instances and database instances. To convert the A and B nodes in MSCS, use the SAP NetWeaver 04 SR1 installation master CD or DVD."
Hope this helps
Regards
Rolf

Error when executing d2kwutil.pll procedure

Hi all,
I use a client/server architecture.
There was an error when executing the procedure write_registry in the w2kutil.pll. I created a test forms , and I just created a control block containing a button. In the when-button-pressed trigger I coded : win_api_environment.write_registry('HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE','TEST_REGISTR','D:\MYLOGS',true); . I already attached the d2kwutil.pll to the form module.
The error is : FRM-40734: internal error : pl/sql error occurred.
So how to resolve it ?
Thank you very much indeed.

You have that atachar the bookstore to the form and then you can make use of the contained functions inside the bookstore.

Error when executing CPACache mode = full

Hi,
I had error, when executing this CPACache mode = full and delta, I am using this link below:
http://demokl:50100/CPACache/refresh?mode=full.
Full :
Error message =
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.px6.demokl</EngineName>
<RefreshMode>F</RefreshMode>
- <GlobalError>
<Message>Couldn't parse Configuration Data cache update XML string from Directory.</Message>
<Trace>org.xml.sax.SAXException: JavaErrors Tag found in cache update XML. at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.startElement(DirectoryDataSAXHandler.java:148) at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.startElementEnd(SAXDocHandler.java:146) at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1814) at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440) at
Delta :
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.px6.demokl</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://demokl:50100/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.px6.demokl), due to: HTTP 503: Service Unavailable at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDataFromDirectory(DirectoryAccess.java:382) at
</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't send confirmation, due to: Couldn't access Confirmation URL, due to: HTTP 503: Service Unavailable at
Thank you and Regards
Fernand

Hi,
I already using user PIDIRUSER to execute CPACache full mode, but still unsuccessfull.
Hi Srinivas,
Which parameter that you mention, i couldn't find in the SXMB_ADM Integration Configuration ?
Thank you and Regards
Fernand

Error when executing standard WDA FITV_POWL_TRIPS

Similar Messages

Maybe you are looking for