Error when executing the query or refreshing the workbook

Hi All,
Whenever I am trying to execute a query or refresh a workbook a error message is poping up saying that
Error: <internal error> Problem when writing table: E_T_cel.
I face this error in few of the queries and when i refresh workbooks. These queries have lot of calculations and filters and they sum up lot of records.
Any help greatly appreciated.
Thanks
Raj.

Hi Maik,
Thanks for reply, I went into tran sm21 but i could not understand the messages there. Below is the list of messages in sm21
                     System Log: Local Analysis of cdsap9d                    1
From date/time............. 04/20/2005 / 10:00:00
To date/time............... 04/21/2005 /
User....................... KADALPR
Transaction code...........
Terminal...................
Task.......................
Problem class..............
Further restrictions.......
Sorted ? ................ SOFI
Pages with single entries 00000100
With statistics............
                     System Log: Local Analysis of cdsap9d                    2
Time     Ty. Nr Cl. Tcod MNo Text                                                                                Date : 20.04.05
12:58:10 DIA 0 100      R49 Communication error, CPIC return code 019, SAP return code 728
12:58:10 DIA 0 100      R5A > Conversation ID: 29858195
12:58:10 DIA 0 100      R64 > CPI-C function: CMSEND(SAP)
12:58:10 DIA 0 100      R68 Perform rollback
12:58:10 DIA 0 100      R47 Delete session 001 after error 003
23:54:49 DIA 1 100      R49 Communication error, CPIC return code 019, SAP return code 728
23:54:49 DIA 1 100      R5A > Conversation ID: 44959947
23:54:49 DIA 1 100      R64 > CPI-C function: CMSEND(SAP)
System Log: Local Analysis of cdsap9d                    3
Time     Ty. Nr Cl. Tcod MNo Text                                                                                Date : 21.04.05
09:32:50 DIA 2 100      R49 Communication error, CPIC return code 019, SAP return code 728
09:32:50 DIA 2 100      R5A > Conversation ID: 83536783
09:32:50 DIA 2 100      R64 > CPI-C function: CMSEND(SAP)
Reading:
Number of records read.........       2777
Number of records selected.....         11
Old records skipped............       2733
Records of invalid users skippe         33
Further selection:
Number of records read.........         11
Number of records selected.....         11
Number of records printed......         11
End of system log
                     System Log: Local Analysis of cdsap9d                    4
                    C o n t e n t s
Contents              Page              Start            End
Selection criteria     1
                       2        20.04.2005 12:58:10 - 23:54:49
                       3        21.04.2005 09:32:50 - 09:32:50
Contents               4
End of program -
If you can help me out as where to look at these messages then it great.
Thanks,
Raj.

Similar Messages

No space left in shared memory error when executing a query

Hi,
When I executed a query, it showed the results. But when I drilled down it by material, it showed the following error message.
Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occured
Error No space left in shared memory
Is there anyone know what is the reason and how to resolve?
Many Thanks
Jean

Your report got too big and you ran out of memory on the server.
Run it for a smaller data set (e.g., a few months instead of a year) to avoid this problem.
Hope this helps...
Bob

ORA-29902 Error when executing context query

We sometimes get the following error when executing a search based on keywords entered by a user:
<BLOCKQUOTE>quote:<HR>Error generating context stmt ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: interMedia Text error: DRG-50901: text query <HR></BLOCKQUOTE>
A demonstration of the error can be seen by going to the main
http://technet.oracle.com technet page and then performing a site search. Type in any of the following search phrases:
Oracle and not Microsoft
not Microsoft
and database
In my brief experimentation, the presence of any of
not, and, or
at the beginning of the keywords, or next to each other 'and not' within the keywords set causes the above oracle error.
OK, I could train the users not to do this, but with the potential for every net user on the planet using my site, it might take me some time to speak to all of them.
So how do I stop Intermedia from throwing up the error? I have written a quick parser to try to strip out offending entries, but that is not, imho, a good solution, as I do not know all the rules that will break it.
tia

You need to write a text query parser. Check the Query Translator code samples from http://technet.oracle.com/sample_code/products/text/content.html

Error when executing a custom transaction(from the program SAPMSSYD)

Hi All,
I have a Module Pool transaction(Custom development). I am executing it in SPANISH Language. In my screen there are no Mandatory fields. But, when I click any of the buttons in the screen, I am getting the error 'Complete todos los campos obligatorios' which means that 'Complete all required fields'.
But, when I execute the same transaction in ENGLISH language, I am not getting this error. I am facing this issue only in SPANISH and GERMAN languages. In other languages, it is working fine.
I did the system debugging to analyze the issue. I found that the error is triggered in the program SAPMSSYD at the below lines.
module %_CTL_INPUT1 input. "#EC
perform %_CTL_INPUT using %_CALLER_PROGRAM_NAME.
endmodule.
There is no MESSAGE command. But, once the control comes out of the PERFORM, the message 'Complete todos los campos obligatorios' is getting displayed.
Could anyone of you tell me the resolution for the issue? This is strange for us as we are getting this error only in SPANISH and GERMAN Languages. In other languages, we are not getting this error.
Please help me in resolving the issue. Thanks in advance.
Thanks & Regards,
Paddu.

Hi Paddu,
as you reported problems in Spanish and German, but not in English, I assume that this issue is related to missing translations for these languages. Therefore I recommend to use transaction SE63 and to translate the text of the transaction/report in question.
Best regards,
Andreas

Error when executing a Query through information Broadcasting

Dear SDN,
We have configured information Broadcasting in the Web Reports---
Scheduled and then when executing the following error is coming
500 internal server error - Microsoft internet explorer
Error when processing your request
What has happened?
The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
Note
The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest us to resolve this error..
Help will be greatly appreciated with points..
Thanks in advance

Hi
Thanks...
I have given only Fiscal Year/Period Variable
Other than Fiscal Year/Period Variable....No Variables in that Query..
In FI Queries, I did not use 0CALMONTH Variable...
I do not know why it is giving that error..
Please suggest us to resolve this error..
Thanks in advance

Error when executing a query on upgraded system

Hi All,
We are in the process of upgrading our BI system. Currently we are on Quality system and its a copy of existing production system. I have executed a query on the production system (3.5 system) successfully.
But the same query when I'm trying to execute on the upgraded quality system (BI 7.0), I get an error " warning info provider was changed or activated at runtime. The query cannot be opened". The same message doesn't pop up on the current 3.5 BI system.
Can anyone help me how I can correct this error?
regards,
Suman

Hi All,
I activated the Infoset and I could eliminate the error. Now the issue is solved.
Thanks

Error when executing a query on master data

Hi Friends,
When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
An error occured in the communication with the BW Server.
Due to this connection has to be closed.
Detailed Description:
The system is configured incorrectly.
Please tell me what could be the problem? How to overcome this?
Thanks,
Sasi

Hi Arun,
Before the execution of query I did that. And it was ' Query is Correct'.
Any more ideas?
Thanks,
Sasi.

Error when execute a query BW in WEBI

Hi Gurus,
I need your help:
Status:
SAP_ABA 700
SAP_BASIS 700
PI_BASIS 2005_1_700
SAP_BW 700
BI_CONT 703
SAP GUI 7.10 SP 7
I run a 3.5 query with bex and all its ok.
But when i want run the same query in BOE Web Intelligence Rich Client I have an error
In WEBI: error : WIS 10901 for MDX QUERY
in BW TR: SM21 : Communication error, CPIC return code 020, SAP return code 456.
thxxhead 7415 020456 ThRecei CPIC-Er
If I just put one masterdata, the query return the list of this MD.
But when i put 2 MD or one indicators, i have error.
Thanks for help.

Hi Ingo,
In response to your questions:
- "you did install the SAP Integration Kit?": yes, we did a "server" install. The other options are Desktop and Custom
- "its not an evaluation key that has expired ?": No, this is not the case
- "did you check the MDX Parser destination in transaction SM59 ?": Yes, this is working now (SM59 - connection test succesful).
- "Try a simple BI Query and build a new Web Intelligence report on top (java, dhtml)" We did this, results:
WebI Rich Client. This worked fine. Report made, refreshes, can add objects, ...
Web Advanced (JAVA Report panel): we get error - "An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: .(WIS 10901)"
We checked if we didn't miss anything with the server installation of the SAP integration kit, this was not the case. When we chose a "repair install", all options where already installed. What we did do, is install the Fix pack2. Reason: there was a reference to mda_sap.dll in the BusinessObjects Enterprise XI 3.0 FixPack 2 notes. Note: refer to new thread: Cluster Definition transport error - BO XI 3.0 FixPack 2 (Server&Client)
- We also tried a more advanced query, with prompted filters and calculations.
WebI Rich Client. same error as before, "The MDX-query <MDX syntax> See RFC trace file or SAP system log for more details. (WIS 10901)"
Web Advanced (JAVA Report panel): same error as before - "An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: .(WIS 10901)"
Seems we have the same problem as Claudia + an mda_sap issue. We are running out of options here. Any thoughts on this?
Thanks for your help!
Raf

Error when executing a query in ECC

W'e're getting the following error when attempting to run a Crystal Report (2008) that uses an SAP ECC query as the datasource:
Database Connector Error: "Screen output without connection to user"
Anyone seen this before? Tried looking this up in the forum but didn't find anything.
Thanks.

Are you up to date on the Crystal ECC transports?
Is the user running the Crystal Reported assigned to the SAP query user group (SQ03/02)?
I have seen strange errors with these two things.
Why not upgrade to CR 2011? We found with our license there was no addiitional fee/cost to do this.
Tammy

Unknown error when executing MDX when refreshing Crystal Report with BEx

Hello Experts,
I have created a Crystal Report (Crystal 2008 SP1) with BEx Query (7.10) and have been able to refresh successfully when the SAP_ALL authorization is included in my user role. I don't want my end users to have SAP_ALL so I created a role and assigned the authorizations recommended in the SAP Integration Kit for BusinessObjects 3.1 Install Guide.
When I run the report as one of the users assigned to my new role I get the following error in the trace file.
ERROR: .\crdb_bwmdx_execution.cpp [200]: l_bapiGetStreamInfo failed with return code RFC_RC = 0 Exception: BAPI Error: BAPI Error #:0
Unknown error when executing MDX
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
I tried all the Fix Packs (ie 1.1., 1.2 and 1.3) for XI 3.1 Integration Kit to try resolving the error but it didn't work.
The same query works fine in BEx Web when running as one of the users in the new role I created for Crystal Report users.
Are there any other Authorizations that I need to include in the role?
Cheers.
Paul.

We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.

Error when executing Java code, java.lang.NoClassFoundError:

Hi, I am new learner in Java Programming and I am using J2SDK and notepad to write a code. I don't have problem in compiling using javac filename, however I received an error when executing using java filename.
The error message I got is Exception in thread "main" java.lang.NoClassDefFoundError: Hello/jawa.
I have verified this simple code - Hello has no issue but somehow it does not run. I even try to compile and execute in other computer also the similiar error returned.
My Client Platform is Windows XP Professional.
I would appreciate any expert can help to suggest me the knowledge/solution to fix this kind of error. Thanks
Jackie

It looks like you entered the command "java Hello.java" or "java Hello/java" (I assumed 'jawa' was a typo.)
You should have entered "java Hello" if your class name is Hello. I am guessing that Hello.java is probably the source code file name. The argument to the java command is the fully qualified class name. "java Hello.java" tells the java command to look for a class named java that is in the Hello package.

Error when Executing the Report - No Authorization for Multiprovider

Hello Experts,
After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the my ID.
The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
Can anyone give me any idea as to how to solve this issue?
Many thanks in Advance..
Thanks
Raman.. This is Emergency for me..

Ok,
Pick up a test user (or your user) and go to transaction su01.
Check the roles that are assigned.
Double-click in each one and choose display. Go to tab authorizations and click on the glasses icon of displaying authorizations data. Then go to menu->Utilities->Technical names On.
You should see the tree with the node name Business Information Warehouse (technical name RS), if you don't see this in this role, than the issue it's not in this role, go back to su01 and check another role the same process until you find this node.
If you expand this node you'll see another nodes, one of them is called Data Warehousing Workbench - InfoCube (technical name S_RS_ICUBE). And you probably can't find another node called Data Warehousing Workbench - MultiProvider (technical name S_RS_MPRO), this is the new node you want.
In the node S_RS_ICUBE expand it and you'll see the authorizations given to InfoCubes with activity, InfoArea and InfoCube. In the older system BW 3.x this object was used to give access to InfoCubes, but also to MultiCubes. So you have to find the role that has this object with InfoCube with the value of MultiCube or with all values, for example, you could have this node in your role with the following values:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFIAA_C11, ZFIAA_C13, ZFIAA_M02
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    *
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFI*
Something like that. The first example give access to specific InfoCubes and one MultiCube, the second one you'll have all the InfoCubes and MultiCubes inside the InfoArea started with name ZFI and the third one you'll have all InfoCubes and all MultiCubes started with name ZFI that belongs to the InfoArea started with name ZFI also.
Got the picture?
So in BI 7 MultiCubes are now controlled by the new object S_RS_MPRO instead of the older object S_RS_ICUBE. What you should do is go to transaction pfcg and insert the role you want to include (or change these new values, i.e., the role that has the access to the MultiCube values inside the object S_RS_ICUBE which the query is built on) the new object S_RS_MPRO and click on change. Go to tab authorizations and click on change authorization data. Then click on manually (ctrlshiftF9) and insert the object S_RS_MPRO. Inside this new object you should insert the authorization data for accessing your multiproviders.
In the 3 examples above you should create these 3 entries:
Activity                          03
InfoArea                         ZFI*
MultiProvider                  ZFIAA_M02
MultiProvider Subobject DATA
or with:
Activity                          03
InfoArea                        ZFI*
MultiProvider                  *
MultiProvider Subobject DATA
or with:
Activity                         03
InfoArea                        ZFI*
MultiProvider                 ZFI*
MultiProvider Subobject DATA
Therefore you continue to have the object S_RS_ICUBE to control only the InfoProviders plus the new object S_RS_MPRO to control the MultiProviders.
Now generate the profile(s), save the role(s) and test it again!
Diogo.

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Java.sql.SQLException: ORA-00933: error when executing query

Hello,
I am trying to execute the following query from a jsp page.
String sqlUpdate ="UPDATE table_name SET name ='"+name+"', description='"+description+"', proj_link='" projlink"', active='" active"',sort_order='" order"',image='" image"',category='" category"', technology='" technology "' WHERE id="+id+" ";
stmt.executeQuery(sqlUpdate);
I get the follwoing error java.sql.SQLException: ORA-00933: SQL command not properly ended
When I omit "description" from the query it executes fine. But when I place it back into the query I get the above error. The table is in Oracle database and the datatype of description id varchar2(4000). I declared all the variables used in the query, I then assigned values caught from the form and then am trying to update the form varibles in the table.
Thanks,
Nikky128

Nikky128 wrote:
Hello,
I am trying to execute the following query from a jsp page.There's a big part of your problem. You shouldn't be doing database stuff in JSPs. If you must, you should be using JSTL and its <sql> tags.
String sqlUpdate ="UPDATE table_name SET name ='"+name+"', description='"+description+"', proj_link='" projlink"', active='" active"',sort_order='" order"',image='" image"',category='" category"', technology='" technology "' WHERE id="+id+" ";Not using PreparedStatement here is just a silly noob error.
When I omit "description" from the query it executes fine. But when I place it back into the query I get the above error. The table is in Oracle database and the datatype of description id varchar2(4000). I declared all the variables used in the query, I then assigned values caught from the form and then am trying to update the form varibles in the table.Probably a single or double quote that you can't see. PreparedStatement will eliminate that problem.
%

Cannot build the query or generate the report - BI4.0 Dashboard on WebService Error

Hello All,
I am trying to create a Dashboard with WebService connections in SAP BI4.0 SP04. While running the dashboard I am receiving the error, Cannot build the query or generate the report. I have already set the refresh parameter to TRUE (bound to an excel cell and I have tried with 1 also). Back end WebI Reports of the BIWS connections are created from BEx queries through BICS connection. I have two prompts to run the Web Service and the report. Please share your thoughts regarding this.
Thanks and Regards,
Debajyoti Dan

Hi All,
I have found the issue. The problem is coming only when I am receiving prompts from BEx query and trying to use them through dashboard. I replaced these BEx prompts with the same in WebI report. Then the entire functionality started working correctly from dashboard.
But, this is only a work around and can not be applied at all times. So I have raised a message for the same to SAP. I will update the thread based on what I receive from SAP Support.

Error when executing the query or refreshing the workbook

Similar Messages

Maybe you are looking for