Error when exporting HD video in CS3

I need help figuring out why I get errors each time I try to export my video in Premiere Pro CS3. It worked a few days ago for my rough cut, but now is not working for my fine cut.
I wonder if it is simply because of my machine's capabilities in working with HD. I'm editing on a Macbook Pro, OS X (10.5.8), 2.5 Ghz Intel Core 2 Duo, 4 GB of RAM. I want to exporting my 3:45 clip using Quicktime, H.264 as the codec and resolution at 1280x720, square pixels.
I've tried changing the settings in various ways but each time get an "unknown error." I've also had this error: "Out of memory. To maximize available memory, set the rendering optimization preferences to 'memory.'" Alas, I changed this setting, but even after closing & re-opening the project, still got this error... Strange?
I have come as far as getting a minute's worth of the video exported. Another problem I see is that the video seems to skip over some of the stills I have in the sequence. Does this mean I would want to use the Animation codec?
Any help is much appreciated! I have yet to try exporting via the Media Encoder, I plan to do this asap.
Thanks.

If you're using only a single internal drive, try exporting to an external drive, especially if the one drive you have is full or nearly so.
-Jeff

Similar Messages

Encoder error when exporting my video from after effects

hi, when i'm exporting my animated video using encoder i get this error...help please?
- Source File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\tmpAEtoAMEProject-grunge_frames_HD1.aep
- Output File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\grunge_frames_HD.mp4
- Preset Used: Match Source - High bitrate
- Video:
- Audio:
- Bitrate:
- Encoding Time: 22:59:38
07/09/2014 11:28:48 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\tmpAEtoAMEProject-grunge_frames_HD1.aep
- Output File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\grunge_frames_HD.mpg
- Preset Used: HD 720p 23.976
- Video: NTSC, 1280x720, 23,976 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 Mbps
- Encoding Time: 00:00:50
07/10/2014 07:36:29 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\tmpAEtoAMEProject-grunge_frames_HD1.aep
- Output File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\grunge_frames_HD.mpg
- Preset Used: HD 720p 23.976
- Video: NTSC, 1280x720, 23,976 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 Mbps
- Encoding Time: 00:00:50
07/10/2014 07:36:29 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\tmpAEtoAMEProject-grunge_frames_HD1.aep
- Output File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\grunge_frames_HD_1.mp4
- Preset Used: HD 720p 23.976
- Video: 1280x720 (1,0), 23,976 fps, Progressive
- Audio: AAC, 192 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 6,00 Mbps, Max 10,00 Mbps
- Encoding Time: 00:00:50
07/10/2014 07:36:29 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\Desktop\Hellermantyton video\hellermantyton video_AME\tmpAEtoAMEProject-Comp 16.aep
- Output File: C:\Users\Temp\Desktop\Hellermantyton video\hellermantyton video_AME\Comp 1_2_1.mp4
- Preset Used: HD 720p 23.976
- Video: 1280x720 (1,0), 23,976 fps, Progressive
- Audio: AAC, 192 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 6,00 Mbps, Max 10,00 Mbps
- Encoding Time: 00:00:25
07/28/2014 02:39:48 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\Desktop\Hellermantyton video\hellermantyton video_AME\tmpAEtoAMEProject-Comp 16.aep
- Output File: C:\Users\Temp\Desktop\Hellermantyton video\hellermantyton video_AME\Comp 1_2_1.mp4
- Preset Used: HD 720p 23.976
- Video: 1280x720 (1,0), 23,976 fps, Progressive
- Audio: AAC, 192 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 6,00 Mbps, Max 10,00 Mbps
- Encoding Time: 00:00:25
07/28/2014 02:39:48 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\Desktop\Hellermantyton video\electrovroomen\hellermantyton video_AME\tmpAEtoAMEProject-Comp 11.aep
- Output File: C:\Users\Temp\Desktop\Hellermantyton video\electrovroomen\hellermantyton video_AME\Comp 1.mp4
- Preset Used: HD 720p 23.976
- Video:
- Audio:
- Bitrate:
- Encoding Time: 05:22:55
07/30/2014 04:22:13 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Temp\Desktop\capitec video\effects\capitec 2 new_AME\tmpAEtoAMEProject-Comp 12.aep
- Output File: C:\Users\Temp\Desktop\capitec video\effects\capitec 2 new_AME\test_3d.mp4
- Preset Used: HD 720p 23.976
- Video: 1280x720 (1,0), 23,976 fps, Progressive
- Audio: AAC, 192 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 6,00 Mbps, Max 10,00 Mbps
- Encoding Time: 00:09:11
08/14/2014 04:05:22 PM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:19
08/20/2014 10:11:46 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:17
08/20/2014 10:13:35 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:24
08/20/2014 10:25:44 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:17
08/20/2014 10:28:32 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Source File: C:\Users\Temp\Desktop\ARB RICHARDS BAY VIDEO\richardsbay_video_ubizane_short_supplier_animation_final_AME\tmpAEtoAMEProject-Comp 13.aep
- Output File: C:\Users\Temp\Desktop\ARB RICHARDS BAY VIDEO\richardsbay_video_ubizane_short_supplier_animation_final_AME\Comp 1_1.mp4
- Preset Used: HD 720p 23.976
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:06:42
08/20/2014 10:34:57 AM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:20
08/20/2014 10:44:01 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:17
08/20/2014 11:50:16 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.

When diagnosing a failed render the first thing you should look for is the difference between the failed project and one that is successful. What is different? What changed?
Before we can get any idea of why these renders are failing we need to know the encoding settings and the type of source footage. Encoding Failed does not tell us anything useful in diagnosing the problem. If your AE project is using effects or footage that is clogging up memory or has some other problem then we should know about your AE comp as well. That means we need to know what version of AE you are using, what effects are applied, and anything else that is different in the project that fails and a simple project that does not.

Error when exporting video

Hi,
Got this error when exporting video. Tried to export in different formats but same error pops up.
Any solution to this problem would be greatly appreciated. I have PreProCS5
Thanks
Shiva

Similar as the last post.. copy and paste.
Found a simple solution;
In Iphoto, select the movie; right click on the movie and select "copy; right click on your desktop or other folder in Finder and then select "paste Item";
The movie will be copied to that location in its original format.
Easy solution until Apple fixes the export movie issue.

'file could not be written due to an error' when exporting jpg

I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
P

Mylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul

Error when exporting reports using MAPI

We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
 
 
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
 
 
 
1) Procmon.exe output when exporting works fine
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 
 
 //////////////////////////////////////////////////////////////////////
 2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
 C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\system\MSO.dll FAST IO DISALLOWED
 C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\MSO.dll FAST IO DISALLOWED
 C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a

I tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
 Type objClassType = Type.GetTypeFromProgID("ebms.main");
 object objMain = Activator.CreateInstance(objClassType);
 try
 object[] p = new object[4];
 p[0] = "C:\\ebms\\co1";
 p[1] = "C:\\ebms\\co1";
 p[2] = "Administrator";
 p[3] = "";
 objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
 catch (Exception ex)
 this.RPTDoc = new ReportDocument();
 this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
 PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
 MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
 ExportOptions exportOpts = new ExportOptions();
 pdfOpts.UsePageRange = false;
 exportOpts.ExportFormatOptions = pdfOpts;
 mailOpts.MailMessage = "something";
 mailOpts.MailSubject = "something";
 mailOpts.MailToList = "emailaddress";
 exportOpts.ExportDestinationOptions = mailOpts;
 exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
 exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
 try
 this.RPTDoc.Export(exportOpts);
 catch (Exception ex)
 MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

Error when exporting file from LR5.2 - file created

After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.

The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0

Error when exporting a pdf in SAP

She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex image

See your other thread.

Error when exporting to flat file in ODI 11g

This works ok in ODI 10g. I'm using IKM SQL to File Append on Windows Server 2008 R2
Getting the following error when exporting to a flat file in ODI 11g: ODI-40406: Bytes are too big for array
I've seen a couple of threads like this on the forum, but I've never seen an answer to the problem.

Problem is with the difference in behaviour for the IKM SQL to File Append KM between 10g and 11g.
Our 10g target file datastore had a mixture of fixed string and numeric columns. Mapping from the source to target was simple one to one column mapping. It generated the desired fixed format flat file; numerics were right adjusted with embedded decimal point and leading spaces. Each numeric column in the generated flat file occupied the exact space allocated to it in the layout. This gave the desired results, even though documentation for the 10g IKM states that all columns in the target must be string.
When we converted to 11g and tried to run this interface, it generated an error on the "numeric" columns because it was wrapping them in quotation marks. The result column was being treated as string, and it was larger than the defined target once it acquired those quotation marks.
In order to get 11g to work, I had to change all the numeric columns in the target data store to fixedstring 30. I then had to change the mapping for these numeric columns to convert them to right adjusted character strings (i.e. RIGHT(SPACE(30) + RTRIM(MyNumericColumn),30).
Now it works.

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins?

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.

I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu.

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

When exporting a video slideshow to my desktop it will start and then just end with no progress so I have to cancel it.

When exporting a video slideshow to my desktop it will start and then just end with no progress so I have to close it out. I get no warnings or any explanations. Any ideas? I am running Windows 7. No problem viewing it in LR. Thanks

Found out LR wasn't stopping but slowed way down. For 19 pictures, no video and no sound it took over 6 Hrs to export. Does anyone have any ideas to help this? Thank You.

SSRS XML Errors when exporting to .xlsx from Dynamics NAV Database

We use Dynamics NAV for our ERP and have many SSRS reports. We get xml Errors when exporting to Excel .xlsx. I've seen this happen since SQL 2008 R2 and have posted in many places trying to find an answer, but was hoping MS would solve the
issue. The numeric data types in the Dynamics NAV database are all decimal(38,20) and when the value is zero the Excel renderer throws the errors.
We now have over 400 reports and we export them to Excel 2003 format. I'm starting to feel like this is my new Y2K issue when Excel 2003 is set to sunset. I'm fearing that I'll have to do conversions on all numeric data types for all reports.
Both of these are Microsoft products so I'm wondering is this even on their radar.
We're running SQL Server 2012 SP2, and just rolled out CRM 2015 on SQL Server 2014. I get the errors in SSRS 2008R2, 2012, and 2014. Has anyone seen this before?
Timothy Kruse

Hi Skywalker73,
According to your description, when you export the report to Excel, the error “Excel was able to open the file by repairing or removing the unreadable content.” throws out when opening the Excel file.
Based on my research, it has reported the same issue when exporting to Excel. The issue could cause by numeric columns has a precision of 16 or higher. To fix the issue, we could change data type in the table to a support lower precision, or convert
the numbers in the stored procedure that populates the report. For more information, please refer to this article:
SSRS 2012 Bug – “Excel found unreadable content”. Besides, please refer to this
article to check if non-printing characters exist in the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

I get an error when exporting imovie

I get an error when exporting a project from iMovie, Error: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission". How do I fix this?

Hello !
Could you please be more elaborative for explaining your issue?

Error when export application from navigator bar

hello, i had this error when export one application.
Error: ORA-06502: PL/SQL: numeric or value error (WWV-11230)
Unexpected error encountered: ORA-06502: PL/SQL: numeric or value error (WWV-15200)

Which version of portal you are using?
And what is the language installed ?

Unknown error when exporting 32-bit 5.1 wav audio

I get the ever useful "Unknown error" when exporting the audio from Premiere Pro CS6 to a 32-bit, 5.1 channel uncompressed WAV file most of the time. I was able to get it to work just fine by pasting the audio to a new project, but that isn't working anymore. I get the same error when I change it to 24-bit audio. However, when I change to 16-bit sound it works fine.
First, is there a real audible difference between 16- and 32-bit when it's all going through a WAV to AC3 converter? The AC3 files get dumped into Encore as the audio track so that I can get 5.1 sound on blu-rays instead of Encore re-encoding things.
Second, what would cause it suddenly not work, and how can I get it working again?

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Error when exporting HD video in CS3

Similar Messages

Maybe you are looking for