Error when exporting/importing
I am using MDM 7.1
When I export the schema from my Dev system to import into QA I get the following Error:
"This repository requires additional steps before transport. See the MDS log for details.
In the log my issue is that I am trying to export an Assignment that includes an expression that uses "look-ups".
In my Dev system I removed the expression to confirm if this is the issue, once I no longer have expressions with look-ups then it allows me to export the schema. I then tries to import it to QA (since the expressions are not changing I planned on excluding them from the import as a temporary workaround.
however I get the same error message when trying to import. It seems that I can not export or import with a system that has an assignment with an expression that uses look-ups.
Is there some config I am missing?
Hi Brad,
assignments/validations are a general problem when it comes to Schema exports/imports! What you can do in case there are not too many assignments - is to delete the assignments and create them new (manually) after you have imported the schema.
Hope this helps a little.
Regards,
Erdal
Similar Messages
-
Materialized View with "error in exporting/importing data"
My system is a 10g R2 on AIX (dev). When I impdp a dmp from other box, also 10g R2, in the dump log file, there is an error about the materialized view:ORA-31693: Table data object "BAANDB"."MV_EMPHORA" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
Desc mv_emphora
Name Null? Type
C_RID ROWID
P_RID ROWID
T$CWOC NOT NULL CHAR(6)
T$EMNO NOT NULL CHAR(6)
T$NAMA NOT NULL CHAR(35)
T$EDTE NOT NULL DATE
T$PERI NUMBER
T$QUAN NUMBER
T$YEAR NUMBER
T$RGDT DATEAs i ckecked here and Metalink, I found the info is less to do with the MV? what was the cause?The total lines are 25074. So I used the GREP from the OS to get the lines involved with the MV. Here are:
grep -n -i "TTPPPC235201" impBaanFull.log
5220:ORA-39153: Table "BAANDB"."TTPPPC235201" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
5845:ORA-39153: Table "BAANDB"."MLOG$_TTPPPC235201" exists and has been truncated. Data will be loaded but all dependent meta data will be skipped due to table_exists_action of truncate
8503:. . imported "BAANDB"."TTPPPC235201" 36.22 MB 107912 rows
8910:. . imported "BAANDB"."MLOG$_TTPPPC235201" 413.0 KB 6848 rows
grep -n -i "TTCCOM001201" impBaanFull.log
4018:ORA-39153: Table "BAANDB"."TTCCOM001201" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
5844:ORA-39153: Table "BAANDB"."MLOG$_TTCCOM001201" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
9129:. . imported "BAANDB"."MLOG$_TTCCOM001201" 9.718 KB 38 rows
9136:. . imported "BAANDB"."TTCCOM001201" 85.91 KB 239 rows
grep -n -i "MV_EMPHORA" impBaanFull.log
8469:ORA-39153: Table "BAANDB"."MV_EMPHORA" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
8558:ORA-31693: Table data object "BAANDB"."MV_EMPHORA" failed to load/unload and is being skipped due to error:
8560:ORA-12081: update operation not allowed on table "BAANDB"."MV_EMPHORA"
25066:ORA-31684: Object type MATERIALIZED_VIEW:"BAANDB"."MV_EMPHORA" already exists
25072: BEGIN dbms_refresh.make('"BAANDB"."MV_EMPHORA"',list=>null,next_date=>null,interval=>null,implicit_destroy=>TRUE,lax=>
FALSE,job=>44,rollback_seg=>NULL,push_deferred_rpc=>TRUE,refresh_after_errors=>FALSE,purge_option => 1,parallelism => 0,heap_size => 0);
25073:dbms_refresh.add(name=>'"BAANDB"."MV_EMPHORA"',list=>'"BAANDB"."MV_EMPHORA"',siteid=>0,export_db=>'BAAN'); END;the number in front of each line is the line number of the import log.
Here is my syntax of import pmup:impdp user/pw SCHEMAS=baandb DIRECTORY=baanbk_data_pump DUMPFILE=impBaanAll.dmp LOGFILE=impBaanAll.log TABLE_EXISTS_ACTION=TRUNCATEYes I can create the MV manually and I have no problem to refresh manually it after the inmport. -
'file could not be written due to an error' when exporting jpg
I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
PMylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul -
Error when exporting reports using MAPI
We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
<br>
<br>
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
<br>
<br>
<br>
1) Procmon.exe output when exporting works fine
<br>
<br>
<br>HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
<br>7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>
<br>
<br>//////////////////////////////////////////////////////////////////////
<br>2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
<br>
<br>
<br>HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
<br>C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
<br>C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
<br>C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Windows\system\MSO.dll FAST IO DISALLOWED
<br>C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Windows\MSO.dll FAST IO DISALLOWED
<br>C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/aI tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
Type objClassType = Type.GetTypeFromProgID("ebms.main");
object objMain = Activator.CreateInstance(objClassType);
try
object[] p = new object[4];
p[0] = "C:\\ebms\\co1";
p[1] = "C:\\ebms\\co1";
p[2] = "Administrator";
p[3] = "";
objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
catch (Exception ex)
this.RPTDoc = new ReportDocument();
this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
ExportOptions exportOpts = new ExportOptions();
pdfOpts.UsePageRange = false;
exportOpts.ExportFormatOptions = pdfOpts;
mailOpts.MailMessage = "something";
mailOpts.MailSubject = "something";
mailOpts.MailToList = "emailaddress";
exportOpts.ExportDestinationOptions = mailOpts;
exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
try
this.RPTDoc.Export(exportOpts);
catch (Exception ex)
MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); -
Error when exporting file from LR5.2 - file created
After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.
The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0 -
Error when exporting a pdf in SAP
She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex imageSee your other thread.
-
Error when exporting to flat file in ODI 11g
This works ok in ODI 10g. I'm using IKM SQL to File Append on Windows Server 2008 R2
Getting the following error when exporting to a flat file in ODI 11g: ODI-40406: Bytes are too big for array
I've seen a couple of threads like this on the forum, but I've never seen an answer to the problem.Problem is with the difference in behaviour for the IKM SQL to File Append KM between 10g and 11g.
Our 10g target file datastore had a mixture of fixed string and numeric columns. Mapping from the source to target was simple one to one column mapping. It generated the desired fixed format flat file; numerics were right adjusted with embedded decimal point and leading spaces. Each numeric column in the generated flat file occupied the exact space allocated to it in the layout. This gave the desired results, even though documentation for the 10g IKM states that all columns in the target must be string.
When we converted to 11g and tried to run this interface, it generated an error on the "numeric" columns because it was wrapping them in quotation marks. The result column was being treated as string, and it was larger than the defined target once it acquired those quotation marks.
In order to get 11g to work, I had to change all the numeric columns in the target data store to fixedstring 30. I then had to change the mapping for these numeric columns to convert them to right adjusted character strings (i.e. RIGHT(SPACE(30) + RTRIM(MyNumericColumn),30).
Now it works. -
In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.
I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu. -
SSRS XML Errors when exporting to .xlsx from Dynamics NAV Database
We use Dynamics NAV for our ERP and have many SSRS reports. We get xml Errors when exporting to Excel .xlsx. I've seen this happen since SQL 2008 R2 and have posted in many places trying to find an answer, but was hoping MS would solve the
issue. The numeric data types in the Dynamics NAV database are all decimal(38,20) and when the value is zero the Excel renderer throws the errors.
We now have over 400 reports and we export them to Excel 2003 format. I'm starting to feel like this is my new Y2K issue when Excel 2003 is set to sunset. I'm fearing that I'll have to do conversions on all numeric data types for all reports.
Both of these are Microsoft products so I'm wondering is this even on their radar.
We're running SQL Server 2012 SP2, and just rolled out CRM 2015 on SQL Server 2014. I get the errors in SSRS 2008R2, 2012, and 2014. Has anyone seen this before?
Timothy KruseHi Skywalker73,
According to your description, when you export the report to Excel, the error “Excel was able to open the file by repairing or removing the unreadable content.” throws out when opening the Excel file.
Based on my research, it has reported the same issue when exporting to Excel. The issue could cause by numeric columns has a precision of 16 or higher. To fix the issue, we could change data type in the table to a support lower precision, or convert
the numbers in the stored procedure that populates the report. For more information, please refer to this article:
SSRS 2012 Bug – “Excel found unreadable content”. Besides, please refer to this
article to check if non-printing characters exist in the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
APEX 4.Loosing translatable text when exporting/importing to new workspace
Hi everyone,
I am developing a bilingual application (base English translated to french) and I noticed something weird when exporting/importing to another workspace.
First, my application is flagged as requiring synchronization after an import. Yes, I did check that it was not flagged right before the export. I did choose Export Translations.
Secondly, when I look at the translated application in the new workspace, my Region Names are not translated anymore (in english instead of french). When I cmpare the 2 Translation Repositories (using the Manually Edit Translation Repository) I lost all Region Names entries (Column Description = Region name).
Thirdly, when again comparing the 2 Translation Repositories, I have the same number of Strings and Distinct Strings by if I group by Column Descriptions the sub-totals differ and I don't even have the same distinct Column Descriptions.
My test was done with my development workspace and a test workspace (where I deleted all application prior to my test) in the same instance.
Anybody had these problems?
Thanks all
I am using 4.1.1.00.23 on the Oracle Database 11g Express Edition.Hi there,
Well....I guess "they lied" would be me, huh?
Unfortunately, this is a bug. This issue with region titles was first reported in Bug in 4.1.1: Region Title translations is lost I recorded it as Bug 13801807 - REGION TITLE TRANSLATIONS LOST WHEN IMPORTING AS A NEW APPLICATION ID. It's fixed in APEX 4.2.
I hope this helps.
Joel -
I get an error when exporting imovie
I get an error when exporting a project from iMovie, Error: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission". How do I fix this?
Hello !
Could you please be more elaborative for explaining your issue? -
Error when export application from navigator bar
hello, i had this error when export one application.
Error: ORA-06502: PL/SQL: numeric or value error (WWV-11230)
Unexpected error encountered: ORA-06502: PL/SQL: numeric or value error (WWV-15200)Which version of portal you are using?
And what is the language installed ? -
Unknown error when exporting 32-bit 5.1 wav audio
I get the ever useful "Unknown error" when exporting the audio from Premiere Pro CS6 to a 32-bit, 5.1 channel uncompressed WAV file most of the time. I was able to get it to work just fine by pasting the audio to a new project, but that isn't working anymore. I get the same error when I change it to 24-bit audio. However, when I change to 16-bit sound it works fine.
First, is there a real audible difference between 16- and 32-bit when it's all going through a WAV to AC3 converter? The AC3 files get dumped into Encore as the audio track so that I can get 5.1 sound on blu-rays instead of Encore re-encoding things.
Second, what would cause it suddenly not work, and how can I get it working again?That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".
-
I always get an ERROR when I import avi videos in After Effects !!
Hi There
As I said in the title ,,
I always get an error when I import an (avi) video into After Effects CS5.5 ,,
and I don't Know why ,
in other hand I can open the same video I imported it in many media programs like : Windows Media Player-Quike Time-Windows Media Center- Real Player ,, except After Effect !
Although the same Program I used before Formatting the computer ,, but after Formatting the Projects file for Adobe After Effect didn't Open as well !!
The Picture I attached shows the Error ,,
Note:
the question marks in the pictures are for the Arabic name of the avi video ,,and this version of Adobe After Effect CS5.5 is trail ,,
I hope to find a solution for my problem ,,
and I'll Be ThankfulIt worked , both what you said worked ,,
First I placed them on the desktop ,
Second I changed the names of the videos ,,
and both of them worked ,,
thanks a lot for your help ,
Mr. TimeRemapper & Mr. Mylenium
have a good day -
Error when exporting to hard-drive
Lightroom 4 was working fine before I tried to export to Flickr. The export was NOT successful, and after that, I encountered an error when exporting to hard drive. Although this error appears, the export to hard drive is always successuful. It is annoying to continuously receive this error message. Any help will be much appreciated. Thanks
That is the small trouble with screenshots: as unambiguous and helpful as they are they are hard to search for their content.
But it looks identical to several other posts here (http://forums.adobe.com/message/4341436#4341436, http://forums.adobe.com/message/4318154#4318154, http://forums.adobe.com/message/4285253#4285253, http://forums.adobe.com/message/4261252#4261252, http://forums.adobe.com/message/4177871#4177871):
In your export manager select "Do nothing" i.o. leaving it blank. down at the bottom where it asks for what to do in Post Processing After Export.
This should have the message go away.
For the sake of searchability I spell out the error message, so that others could find this being answered:
Unable to Export:
An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.
Cornelia
Maybe you are looking for
-
My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!
-
Data Transfer problem from cursor to table
Hi , I created one Extract FM to extract data through a Datasource by RAS3. When i run the FM directly the cursor value (S_CURSOR) is displayed as 3850 and when i try to transfer using FETCH NEXT to a internal table (E_T_DATA) 498 entries
-
Currency to Non Leading Ledger
Friends, I want ot give the USD currency to my non leading ledger. how should i do that? Please give me IMG path also. My co code currency is INR. For my non leading ledger i want to give UDS currency. Right now posting in non leading ledgers are al
-
Hi, I have a problem with my project. I have created a J2EE project. The EJB module contains required Entity beans, session beans and a message driven bean. The Web module conatin jsp and servlets. All files are error free. When i build the project i
-
Smbd - let client move files on share without local copy
I have a file server running Arch and samba 4.0.5. It serves a single share /mnt/share This share is mounted on a notebook thats connected to the local network via WLAN and running windows 8 (tried OS X too). When i now try to move or copy files on t