Error when filling setup table

Hi!
I'm trying to fill the set-up table in R3 for SD Billing Documents.
SBIW (Display IMG (Settings for App Specific Datasources --> Logistics --> Managing Extract Structures --> Initialization --> Filling in the Setup Table --> App. specific setup of statistical data)..
When running the program i get this error msg:
"More faulty documents found than the tolerated 0000000000"
The result is that the program stops. Some of the data is coming into the set up tables, but this seems to be inconsistent.
Anybody know what I could do?
BR
Bjørn

Thanks a lot..
How can I find the log of dumped jobs?
BR
BJørn

Similar Messages

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Timeout error while filling setup tables

HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.

thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

Error while filling setup tables

Hi All,
By mistake my Delta queue for SD Deliveries (2LIS_12_). NOw as a solution we are filling in the setup tables again.
But the request for filling up the tables cancelled giving the error "Document number does not exist".
I donot know, how to solve this? Plz help me ,....Its really really urgent.
Thanx in advance.

Hi Preet,
Go through this links:
Re: problem when initializing setup tables for lo update
"No extraction structure active or no BW connected"
LO: No extraction structure active or no BW connected
Thanks,
Ajay

Strange error while filling setup tables for purchasing

hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.

hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you.

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

LO-COCKPIT: error in Filling Setup tables

Dear Guru's:
While filling setup tables from tcode: sbiw, I am getting following error:
EXTRACT STRUCTURE NOT ACTIVE OR BW NOT CONNECTED.
Bw is connected with R/3- I also have checked the connection thr' SM59, its working.
And even Extract structure is Active.
Then why this error is coming?
Pls let me kno.
Points will be rewarded.
Thank you.

Are you on Developement? If it is, please go to RSA6, look for the data source, and see if the extract structure is actually active, there may be one or more includes, check each one of them, if everything is fine, I would just reactivate it and move it to quality and production. If that happens only in Production, but it is fine in development, then I would make sure the development and production sytem extract structure matchs. Sometimes, someone modifies the development but never moved it to production. Check the last transport created for that extract structure too.
thanks.
Wond

Short dump error while filling setup tables for 2LIS_06_INV

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
plz can anyone help me out...

Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
Information on where terminated
    Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
    The main program was "RMCENEUR ".
    In the source code you have the termination point in line 827
    of the (Include) program "LMRMBWF01".
    The program "SAPLMRMBW" was started as a background job.
    Job Name....... "RMCENEUR"
    Job Number..... 10524100
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLMRMBW "; its source code begins in line
    806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING    t_mcrbkey_bv    TYPE mcrbkey_t
807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
808                                  t_ekbe_acc      TYPE t_ekbe
809                         CHANGING t_mcrbco        TYPE mcrbco_t.
810
811   TYPES: BEGIN OF s_target.
812   TYPES: table_left LIKE rbco.
813   TYPES: table_right TYPE rbex.
814   TYPES: END OF s_target.
815   TYPES: t_target TYPE TABLE OF s_target.
816
817
818   DATA: t_rbco_nbv TYPE t_target,
819         t_rbco_bv   TYPE t_target,
820         s_rbco      TYPE s_target,
821         s_ekbe      LIKE ekbe,
822         s_mcrbco    TYPE mcrbco,
823         l_index     LIKE sy-tabix.
824
   825 * Data source: invoice item non-background
826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>>     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828        ON   ( rmandt = imandt AND
829               rbelnr = ibelnr AND
830               rbuzei = ibuzei AND
831               rcobl_nr = icobl_nr )
832        INTO TABLE t_rbco_nbv
833        FOR ALL ENTRIES IN t_mcrbkey_nbv
834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835              r~belnr = t_mcrbkey_nbv-belnr.
836   ENDIF.
837 * Data source: invoice item background
838   IF NOT t_mcrbkey_bv[] IS INITIAL.
839     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840        ON   ( rmandt = imandt AND
841               rbelnr = ibelnr AND
842               rbuzei = ibuzei AND
843               rcobl_nr = icobl_nr )
844        INTO TABLE t_rbco_bv
845        FOR ALL ENTRIES IN t_mcrbkey_bv
846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance

Error when running setup table for 2LIS_03_UM

Hi experts,
When running the setup table for 2LIS_03_UM, we got the error message "Plant FP01 does not exist." Any suggestions on how we can fix this?
Thanks,
Donna

check if this plant has been maintained in source system or not. If not, ask the concerned team to maintain it.
Another way may be to allow error records which should ignore errornous records and rest should be filled in setup table.
Regards,
Gaurav

Error while filling setup table

Hello all
I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
could anyone tell me what this error is referring to ?
thanks

Hi DK.............
I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
Exchange rate table is TCURR.
Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
Regards,
Debjani...........

Error while filling setup table for Quality Mangement D/Sources

HI Experts,
Iam trying to fill the QM setup tables.
Steps iam following are
1.T-code OLIQBW
2.Selecting Event QV, QE and gave selection parameters and name for Run.
3. Execute
4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
   Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
   Date and Time          27.08.2009 11:21:01
Function parameter "I_ADDITIONAL_DATA" is unknown.

Hi Mansi,
Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN
Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time          27.08.2009 11:56:20
ShrtText
Function parameter "I_ADDITIONAL_DATA" is unknown.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLQMER" had to be terminated because one of the
     statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
     with the parameter "I_ADDITIONAL_DATA".
     This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
     . The exception, which is assigned to the class
      'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
     caught nor passed along using a RAISING clause, in the procedure
      "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
      to occur, the running program was terminated.
     The reason for the exception is:
     The reason for the exception is:
     Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
     with the parameter "I_ADDITIONAL_DATA".
     This parameter is not defined.
Missing RAISING Clause in Interface
     Program                                 SAPLQMER
     Include                                 LQMER$01
     Row                                     5
     Module type                             (FUNCTION)
     Module Name                             QMER_EXTRACTION_RD_RESULTS
Trigger Location of Exception
     Program                                 SAPLQMER
     Include                                 LQMERU01
     Row                                     488
     Module type                             (FUNCTION)
     Module Name                             QMER_EXTRACTION_RD_RESULTS

Error while filling setup table for 2LIS_03_BF

Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.

Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya

Error in filling setup tables

While filling the setup tables iam getting this error.
Material 009011-004 could not be converted from unit EA to unit FT
Message no. QMEX 010
Diagnosis
There is no quantity conversion of unit EA into the base unit ofmeasure FT in material master 009011-004.
System Response
During compression of the MCQALS communication structure, allquantities must be converted into the material base unit of measure. Inthis case, the quantity key figures were inconsistently updated fromthe MCQALS communication structure into the quality info system orBusiness Information Warehouse for material 009011-004.
Procedure
- Fill in the missing quantity conversion in material master 009011-004 .
- After filling in the missing quantity conversions for all materials,carry out a reorganization.
Regards
Kunal

Hi,
Basically you need to check your R/3 system to make sure all Unit Conversions are maintained or not.
With rgds,
Anil Kumar Sharma .P

Block document when filling setup table

hi experts :
I have a question about blocking document ,do we have to block the document when filling the setup table and when doing initial extracion both ? or just filling the setup table?this confuess me .
in experiance ,how long will it take to fill the setup table if the total records reaches about 5 million .
thank you in advance
cindy

Hi,
It is recommended to fill the setup table after logging off all the transaction users, preferably during nights (basically you will have to take a down time of the R/3 system). if you have taken a down time then it is not necessary to block documents, since there would be no users posting transactions.
The blocking would be useful if you are trying to fill the setup table during the day time and there is possibility that users could post some documents. However by blocking documents, this would prevent the users from posting / creating documents and this could hamper the normal business (like creating billing documents, orders etc).
if you are doing the filling up at night after taking down time then the approx time could be 1 hour(my guess) again this could depend on the application servers, RAM etc. However if you are trying to do it during the peak hours, i.e when the users are doing transaction(which is not recommended), then it is very difficult to estimate the time.
Assign points if useful.
Regards
Venkata Devaraj

Error when filling setup table

Similar Messages

Maybe you are looking for