ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube.  I'm creating an Info Cube based on already existed info cube.  Literally I am copying all the settings of an info cube to new Info Cube.  The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful.  But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

Similar Messages

  • Unable to generate "Export data source" for Master data infoobject

    Hi Gurus,
    I'm in BW 3.5
    I need to generate "Export data source" for a master data info object.
    I followed below steps:
        I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
        In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource  was successful"
    Problem:
    Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
    Could anyone please help ????
    Thanks,
    Venkat

    Hi Venkat,
    I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
    However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
    If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
    Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
    -Vikram

  • Error when generating master data routines

    Hello all,
    I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
    I´m working with BW 7.0.
    Has anybody had this problem?
    How could I solve it?
    Thanks in advance.
    Carmen

    Hi Carmen,
    I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
    I found  also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
    I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
    I hope this helps.
    Best Regards.
    AW

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • 0COSTCENTER Error when generating master data routines

    Hi,
    Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
    The Object Status of the Characteristic is showing in "Inactive, not executable".
    Erorr message is:
    Error in activating the InfoObjects
    Message no. R7286
    Please let me know how to activate 0COSTCENTER.
    Regards,
    Ravi

    This has been solved.
    In SE14, I have also deleted the data.
    Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
    Go to Table Entry ==> Delete.
    Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
    I am able to activate the Infoobject 0COSTCENTER again.
    Hopefully, this would be helpful for others also.
    Regards,
    Ravi

  • *** Transporting Generated Export Data Source *** urgent issue

    Hi All,
    I have generated export data source from info object Company Code,
    And trying to transport the Export data source, i.e. 8Company_code to QA system.
    Its showing the log that, imported sucessfully, but, i can't see the object in QA.
    Iam currently working on BW 3.5 system.
    Please help.
    Thanks,
    Nisha

    Hi Luis,
    Thanks for this.
    Yes, i went into Transport connector >> choosen the object >> Data flow before >>
    Ticked the Data sources >> changed the Package from $TMP to ZXXX >> Generated Transport request >> Released it >> Transported it.
    But, still can't see....
    Cheers,
    Nisha

  • Diff b/w Data Mart & Generate Export data source

    HI All
    Here  i want one small clarification.
    will you plze help me regarding of the following
    I want to know the Difference between Data Mart & Generate Export data source.
    In my point of you both are little bit same.
    any way some budy explain with full details.
    If you provide any help doc its too help ful for me.
    Regards n Thanks
    kgb

    Hi kgbm,
    This my point of view:
    1)DataMart: in BI you use this term for identify a specific area of analysis in your DataWarehouse. Generally it is obtained with an aggregation of data of other structures, or combining internal data with external data.
    2)Generate Export D.S.: it is the technical tool to obtain an extractor to feed other structures, called DataMart.
    Ciao.
    Riccardo.

  • Generate Export Data Source

    Hi,
    Why Generated  Data Source is available for ODS with out  doing the Generate Export Data Source on ODS. But it is not available for Infocube.
    Is it neccessory to do Generate Export Data Source for ODS.
    But with out doing this we can also able to use the Generated Data Source.
    G K Reddy

    Hi,
    It is not needed to generate the "export datasource" on ODS again  as it automatically creates one. Yes u can use the generated one with out manually generating it.
    To see the generated datasource , RSA1->Modelling->Infosources.
    From trhe menu click on Settings -> Display generated objectes-> select "show generated ODS objects". Then you can find ur generated datasource on ODS.
    Hope this helps,
    Shylaja.

  • Error While Transporting export Data Source

    Hi Experts,
    We have a requirement to transport a data source from development to quality system through acceptance box.
    We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
    Please suggest how to get these 2 fields in acceptance box.
    Thanks,
    Sachin Motgi

    Hi,
    Check if your data source extract structure is having all 40 fields.
    Save and generate the data source again, replicate and then transport.
    I hope it will help.
    Thanks,
    S

  • Error - When Activating Generic Data source in BW DEV

    Hi,
    I am working in BI 7.0
    I created a Generic Data source
    I had checked in RSA3 , it is showing records too.
    i replicated the Datasource in BW
    Datasource is available in BW
    Then I try to activated the Datasource
    because
    when i try to create tranformation for the data source then
    It will show this message (and transformation is not created)
    <b>Source RSDS ZCOPC_C10 GDVCLNT110 does not exist</b>
    My Data source name is ZCOPC_C10 for source system GDVCLNT110
    then I will try to Activated the Data source First
    then also it will show the Error like this
    Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
    <b>&
    Error when activating DataSource ZCOPC_C10                     GDVCLNT110</b>
    and the
    DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
    can some body help me to solve this problem
    sure you can get the points
    Thanks
    prasanna

    Hi Oscar,
    The Data source is not Active in BW, I had checked in Data source defination.
    when I activate the Data source .
    <b>I received the Message / Error</b>
    Activation of Objects with Type DataSource
    Saving Objects with Type DataSource
    Internal Activation (DataSource )
    Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
    Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
    Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
    Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
    Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
    Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
    Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
    Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
    Writing of object catalog entries (TADIR)
    Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
    Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
    Activate all Dictionary objects ( 6 ):
    All DDIC objects have been activated / deleted
    <b>Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
    Error when activating DataSource ZCOPC_C11                     GDVCLNT110</b>Deletion of Unused Dictionary Objects ( 6)
    All DDIC objects have been activated / deleted
    Deletion of Object Catalog Entries (TADIR)
    Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
    Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
    Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
    Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
    Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
    Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
    All unused DDIC objects have been deleted
    Thanks
    prasanna

  • Error when activating rda data source

    hi,
    i am trying to activate my data source it is saying
    'web service object already exists'.
    how to activate it
    it is not used anywhere

    Hi Venkat,
    Web Service data source works after the SP10....
    Pls check..
    Thanks
    Gopal

  • Error when generating Live Data Report from CUIC in CUCX 10

    Hello Guys,
    I have a problem generating Live Reports on CUIC (UCCX 10 deployment).
    I receive the following error:
    "Error updating the filter information. XMPP Messaging infrastructure error"
    All the services are IN SERVICE
    Any ideas??

    Hi Rami,
    For the benefit of the audience, here is the defect which was filed for this issue after we worked on this yesterday: CSCuo75043
    Cheers,
    Abhiram Kramadhati

  • Error in generating export datasource

    Hello Experts!!
    I have generated export data source for an infocube. The system created the data source.
    Now i implemented an SAP provided exit in the datasource, due to which one new field 0BCS_REFYP7 is added to the communication structure. This field has the property "Only visible in user exit" set. This field is only added to the datasource and not to the infocube.
    Now when i try to assign the 8xxxxx system generated infosource to this datasource, the system throws an error. Because it tries to map this field to a company code field.
    So, the condition is, this field is there in the datasource communication structure, but not in the infosource. So, while generating the transfer rules, it gives error.
    The error says:
    The following errors occured when saving mapping:
    Field BCS_REFYP7 will not be delivered from datasource XXXXX in source system XXXXXX.
    The data type of infoobject 0BCS_REFYP7 is incompatible with field 0COMPANY.
    Can anybody suggest how this can be reslved?? Full marks are assured..
    Regards,
    Vikas Bittera.
    Can anybody suggest

    Hi Srinivas..
    Thank you very much for the response..
    Actually the error is not due to the Enhancement. As i am trying in a server, where the cube is without this enhancement.
    Neither the cube nor the datasource have the enhancement field. And their structure is also same..
    But even after replicating and generating the datasource, The system does not create the transfer rules.
    In rsa1, if i goto infosources, and click to see the transfer rules.. It gives me error "Formula is not available in the table RSAFORMMAP".
    Please help me!!
    Thanks and Best Regards,
    Vikas Bittera.
    **Usefull answers will surely be rewarded**

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

  • 80IC_C03 Export data source

    Hi,
    As far as I know, fact table of cube 0IC_C03 stores only inflow and outflow key figures and not the main key figures.
    Hence, the cube does not have a record for every 'Calday'. In query, Stock is calculated for any 'Calday' at runtime.
    When I generate export data source, it provides 'Inflow', 'Outflow' as well as main stock KF.
    Shall I conclude that the export data source gives me record for every 'Calday'.
    If not, please give me suggestion how to get stock for every calday so that I can update it into another data target,
    Thanks,
    Anup

    Hi
    You can take a query based on 0calday and you can use APD to upload the query data into any data target
    Look this
    http://help.sap.com/saphelp_nw70/helpdata/en/dd/88a1004d16824dac8b40cc223d466e/frameset.htm
    Cheers
    gn

Maybe you are looking for