Error when generating mail form, no data in field PLANSTART_IO

Hi,
I have added the structure CRM_MKTPL_CAMPAIGN_TASK to my scenario in customizing. But when I try to test my new mail form, then there is no data in the field Planned_start from my campaign element, PLANSTART_IO.
How do I make data available in my marketing form from my marketing element?
Kind Regards
Michael

Found a note

Similar Messages

  • R 6018 unexpected heap error  when generating a form in Designer

    When generating a form in Designer i get the following error:
    r 6018 unexpected heap error
    Has anyone else encountered it before with forms?
    Kind Regards
    Maurice Niezen

    You put the question to wrong forum. If it is regarding to Oracle Forms, then post to Oracle Forms forum. If it is regarding to Oracle Designer, then post to Designer Forum. This is the forum for Oracle Reports.
    Thanks,
    -Shaun

  • Error when generating master data routines

    Hello all,
    I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
    I´m working with BW 7.0.
    Has anybody had this problem?
    How could I solve it?
    Thanks in advance.
    Carmen

    Hi Carmen,
    I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
    I found  also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
    I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
    I hope this helps.
    Best Regards.
    AW

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • ERROR WHEN GENERATING EXPORT DATA SOURCE

    Dear Members,
    I am getting an error when generating export data source for Info Cube.  I'm creating an Info Cube based on already existed info cube.  Literally I am copying all the settings of an info cube to new Info Cube.  The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful.  But the problem is when I am generating export data source the following error is occurred.
    Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
    what could be the reason for the error?
    Please let me know.
    Thanks in advance.

    Dear Venkat,
    The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
    Thanks,
    Krish

  • R 6018 unexpected heap error when generating forms

    When generating a form in Designer i get the following error:
    r 6018 unexpected heap error
    Has anyone else encountered it before with forms?
    Kind Regards
    Maurice Niezen

    You put the question to wrong forum. If it is regarding to Oracle Forms, then post to Oracle Forms forum. If it is regarding to Oracle Designer, then post to Designer Forum. This is the forum for Oracle Reports.
    Thanks,
    -Shaun

  • 0COSTCENTER Error when generating master data routines

    Hi,
    Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
    The Object Status of the Characteristic is showing in "Inactive, not executable".
    Erorr message is:
    Error in activating the InfoObjects
    Message no. R7286
    Please let me know how to activate 0COSTCENTER.
    Regards,
    Ravi

    This has been solved.
    In SE14, I have also deleted the data.
    Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
    Go to Table Entry ==> Delete.
    Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
    I am able to activate the Infoobject 0COSTCENTER again.
    Hopefully, this would be helpful for others also.
    Regards,
    Ravi

  • Error when Generating the Program

    Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
    "Error when generating the program" Message no. /SAPAPO/TSM141
    Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
    Possible causes:
    1. The template has been corrupted
    2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
    This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
    Anyone encountered this error message and any possible solutions to this issue.
    Thanks
    Surender

    I did find an ABAP Dump when looking at ST22.  The short message is as follows:
    Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
    Date and Time          05/14/2007 19:33:54
    Short text
         Jump distance is too large and cannot be generated.
    What happened?
         A jump distance is too large and cannot be generated.
         A control structure or a routine with "CHECK" or "EXIT" contains
         too many ABAP statements.
         Error in the ABAP Application Program
         The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
          because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
          determined that
         within an ABAP event a control structure (for example, IF..ENDIF
         or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
         become too large. The resulting jump distance is too large so that
        it could no longer be generated.
        With the internal load format, the jump distance must not be
        greater than 32768 (this is the size of approximately 10.000
        ABAP statements).
        The jump distance that is to be generated, however, is 50885.
    How to correct the error
       The ABAP application program must be changed.

  • Error when generating program /SAPAPO/TSM141 and Errors in source system

    Hello APO Experts!
    I had to include a new key figure in the cube and the planning area with configuration semantic = 000.
    The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" and u201CErrors in source systemu201D when trying to load data in the Infopackage.
    Do you have any idea of what this could be?
    Best Regards
    Nik

    Hello,
    The problem may come from the inconsistency between the datasource settings and the content in table /SAPAPO/TSAREATE.
    - SE16, go to table /SAPAPO/TSAREATE, input the planning area name, check the extraction structure, which is started from  '/1APO/EXT_STRU'.
    - SE16, go to table /SAPAPO/TSAREAEX, input the datasource name, and check the extraction structure.
    Are the two extraction structures the same or different ?
    If they're different, please read the below solutions, otherwise, you can ignore the following.
    In general and most customer cases this inconsistency happens during transporting of datasource alone. In many cases the planning area is directly created at target system and datasoucre transported from a a different system which causes incorrect export structure entry in planning area table.
    Please refer to following content from note 549184:
    Q4: Why could I have extraction problem after transport of DataSource?
    A4: DataSources for DP/SNP planning areas depend directly on the  structure of the planning areas. That's why the planning area MUST  ALWAYS be transported with or before the DataSource.
    The simple solution will be to create a dummy data source for this planning area. This will regenerate the extract structure for all other data sources as well and update the corresponding tables. After that you can delete the dummy datasource.
    After delete the dummy datasource, in case of inconsistency, please also run the report /SAPAPO/TS_PSTRU_GEN report for
    - Basis - form routines
    - Create planning objects
    - Planning area extractor
    with the flags "Reset generation time stamp" and "Generate" set.
    And in order to transfer datasource correctly, please also refer to the consulting note 514524.
    Best Regards,
    Ada

  • ESS Payslip : Error when creating a form

    Hi Experts,
    Please help me on this issue.
    The payslip is not getting generated in QA portal. I have checked everything, feature, report variant. The payslip is getting generated from the back end.
    But I have not checked from PZ11_PDF, becz of authorisation issue.
    Can anyone guess what could be the problem?
    thanks
    Jay

    Here is the error
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Error when creating the form   
      Error when creating the form:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
         at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
         at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
         at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

  • Application error while generating PDF form

    Hello there,
    I am getting the message "Application error while generating PDF form" and when you hover it has additional information Message Class HREIC_APPL - Message number 258.
    I get this upon doing the following steps:
    1. Enter SAP R3, enter HREIC on the transaction code input.
    2. Enter EIC, Activity Search. Searched for an Activity, selected it and click the "PRINT" button.
    3. After clicking the PRINT button, I get the error message "Application error while generating PDF form".
    Installed this on development box, did the same configuration in test system, but still I get this error. ADS Configuration is working fine and configured fine.
    Is there anything else that is needed to be checked? like Ports, Firewalls, etc?
    Thanks a lot.

    Be sure that the RFC name is "ADS" and not anything else.
    Thanks.

  • Error when generating the report (see long text), Message no. AQ_AD_HOC221

    Hi All,
    I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
    When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
    I have also checked the data types and the references. Nothing seems to be wrong here.
    Does anybody has any clue about this ?
    Kajal

    Hi Bernd,
    I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
    I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
    Anyways thanks a lot for the reply.
    Kajal

  • Adobe Reader error when downloading a Form (IMM5257E - required for CIC - Canadá)

    I received an error when downloading a file viwh the Adobe Reader version 11.0.07.
    A message like this appear:
    To view the full contents of this document, you need a later version of the PDF viewer.

    Pat Willener!
    GREAT THANKS! GREAT THANKS! GREAT THANKS!
    I was using Google Chrome, and did not suspect that this could be the
    problem.
    I used I.E. and the download worked. So that's it.
    Great thanks again.
    Vilson Drehmer
    Rua Balduíno Pedro Vier, 693
    CEP 95.880-000 - Estrela - RS
    Fone: (51) 8401.2253
    E-mail: [email protected] <[email protected]>
    CRA-RS 6364
    2014-05-28 5:26 GMT-03:00 Pat Willener <[email protected]>:
        Adobe Reader error when downloading a Form (IMM5257E - required for
    CIC - Canadá)  created by Pat Willener<https://forums.adobe.com/people/pwillener>in *Adobe
    Reader* - View the full discussion<https://forums.adobe.com/message/6414530#6414530>

  • Error when generating catalog SRM_EXTRACTED_CTLG

    Dear All,
    We are trying to transfer product and contract catalogs from SRM server to Catalog authoring tool. The RFC connections were created and scenarios in XI have been imported as per the cookbook. The XI part seems to be working fine and a correct response was received by XI (as per SXMB_MONI), but we find the following error in the SRM application log (tcode: SLG1)
    The following exception was raised:
    /CCM/CX_OBJECT_CREATION_FAILED
    Error when generating catalog SRM_EXTRACTED_CTLG
    The exception occurred at the following point: 
    Program  /CCM/CL_CATALOG_MANAGER=======CP 
    $EXC_CLASS    /CCM/CX_OBJECT_NOT_FOUND
    The earlier threads seemed to mention applying service packs so we did a check and found everything fairly up to date, as follows:
    SRM Server 5.5 (Service Pack 4)
    ABAP Rel 7 (Service Pack 7)
    CCM Server 2 (Service Pack 4)
    As I'm basically an XI person, I'm not sure how to debug this error. Can anyone please help me out on his?
    Thanks and Regards
    Arun

    Hi All,
    Just bumping up my question again. Any pointer on this... please?
    Best regards,
    Arun

  • Error when generating the update program RSAU484

    Hi,
    I am getting the following error while loading data into customer master  from CRM system
    Error when generating the update program
    Message no. RSAU484
    Diagnosis
    An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
    Procedure
    Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

    Yes,there is just a single line of code in the start routine
    DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
    and update rules  for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
    Could this be a technical issue on the flexible update or a data quality ?

Maybe you are looking for

  • How to access SAP database tables with Java (Jco)

    Hi! I need to develop a Java Client for SAP with access to the SAP database. Is there a way to do this directly in Java (the db access) or do I have to use some ABAP logic in between to get the information to the java client? If so, are there any exi

  • Error downloading iTunes 11.1

    Hi,    Please help. I am not able to download iTunes 11.1. I keep getting the message "an error occurred while downloading", but no error code is included. I am using a macbook pro with ios Lion 10.7.5. and 2.4 Ghz intel core i5. Available memory is

  • Submit new Item Conditions via Function Module BAPI_PO_CREATE1

    Hi all, I have problems using FM BAPI_PO_CREATE1. I want to transfer Item conditions via FM, but I am not able to change the netprice via FM, my Conditions are not displayed within the Item (only netprice of Item is displayed). I create POs out of a

  • After insllation BOBJ4.0 SP2 in Suse Linux 11 Rich client error

    Hi Friends, I am installed BOBJ 4.0 SP2 in suse Linux 11 server using default database ( DB2) after successful installation when I run http://BOEserver:8080/BOE/InforVew then goto Web Intelligence Application its show following errors popup appears E

  • Why the same file is downloaded again and again?

    The same file, from the same url is dowloaded many times to the same directory. Is this some kind new technology or do you compete with Youtube in dowloaded data?