Error when generating master data routines
Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen
Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW
Similar Messages
-
Error when generating master data routines when activating infoobject
Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM -
0COSTCENTER Error when generating master data routines
Hi,
Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
The Object Status of the Characteristic is showing in "Inactive, not executable".
Erorr message is:
Error in activating the InfoObjects
Message no. R7286
Please let me know how to activate 0COSTCENTER.
Regards,
RaviThis has been solved.
In SE14, I have also deleted the data.
Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
Go to Table Entry ==> Delete.
Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
I am able to activate the Infoobject 0COSTCENTER again.
Hopefully, this would be helpful for others also.
Regards,
Ravi -
ERROR WHEN GENERATING EXPORT DATA SOURCE
Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish -
Error when uploading master data
Hello everybody...
I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
Error 8 when compiling the upload program: row
227, message: The data type
/BIC/CCABZRAK_COUN_ATTR was modified
plz suggest me.....
Thanks & Regards
Rakesh JangirHi,
There might be two reasons..
1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
2. Close the flat file while loading data...
Regards,
viren.. -
Error when reading master data attribute in transformation
Hi All,
I have 0employee in source DSO and it is mapped to Cube transformation correctly.. There are other objects in cube which are the attribute of 0employee master... I map 0employee to these objects and in transformation i select read from master data then it throws up an error...
bold S:RSTRAN:556 39 0EMPLGROUP 01 Standard Group 0EMPLOYEE
Dont know why this error is popping up ...
Any pointers on this...
Thanks & Regards,
Anup
Edited by: Anup Chaudhari on Feb 20, 2012 1:29 PM
Edited by: Anup Chaudhari on Feb 20, 2012 1:30 PMHi,
This is a strange error that everybody faces but you can try this way.
1) select the target object Employee attribute in the transformation
2) assign the source field in the transformation. the source field should be 0EMPID
3) In this source field there is a coulmn called IOASSIGNMENT. Type 0EMPID at that point
4) change the rule type from direct assignment to master data attribute. Now you can select the field 0EMPID.
Regards,
Siva -
Processing overdue error when loading master data
Hello,
While loading data for master data infoobject, i'm getting peculiar error like processing overdue. what might be the problem.
Please respond as soon as possible it is very urgent.
REGARDS,
SRINIVAS OLETIhi,
is this your first upload ? the rfc connection to source system is established well ?
try to check in monitoring
- tab 'status', click step by step analysis, what's the status of 'RFC to source system success ?' grey ?
- transaction st22 and sm21, any message ?
- check menu 'environment' - shortdump - in datawarehouse, check for source system also, then transaction rfc, ale management, system log ... -
DTP Error when loading Master data from DSO to InfoProvider
Hi Experts,
My DTP is failing when I am running a DELTA load from DSO to the InfoProvider. The errors are either duplicate records or overlap of Dates etc.
Thanks,
SB.Hi Gopal,
Here is the info on error message.
" There are duplicates of the data record 1 & with the key '00000000038 &' for characteristic EPROPERTY &. "
Hope this helps in understand the DTP error.
Thanks,
SB. -
Error when generating Live Data Report from CUIC in CUCX 10
Hello Guys,
I have a problem generating Live Reports on CUIC (UCCX 10 deployment).
I receive the following error:
"Error updating the filter information. XMPP Messaging infrastructure error"
All the services are IN SERVICE
Any ideas??Hi Rami,
For the benefit of the audience, here is the defect which was filed for this issue after we worked on this yesterday: CSCuo75043
Cheers,
Abhiram Kramadhati -
Error 7 occurred when generating the data transfer program
Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR -
'Error occurred when deleting master data (RSDMD118)'
Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba -
Generating Master Data Export DataSources Error
Hi Guys
I 0VENDOR info object to be exported to other BI system . Iam using Generating Master Data Export DataSources. When I right click on 0vendor and say Generate export data source it shoud create 80VENDORM , 80VENDORT. But when I am doing that its saying generation successfull (what ever the success message)..when I go check the Infosources / Data Soruces / Info Provder and try to search 8zvendorM...I couldnt find this...Also I searched with vendor in all the tabs...Iam only finding 0VENDOR but not the new created once..Can any one tell me where should i check for it...Also ,please note that...Iam also using the same function Generate Export DS for one DSO and I can see this one in the Unassigned nodes of the Info Source TAb......
Please let me know the sol ASAP
regardsHi PB and Voodi
I tried with Voodi's Sol and am still not able to find the 80VENDORM and 80VENDORT ....Where as PB's...I cant find the generated objects.in the settings tab...Can you please let me know what will be the issue and how to find this Data Sources....
Please let me know ASAP...regards -
Error when generating the update program RSAU484
Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ? -
Error when Generating the Program
Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
SurenderI did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time 05/14/2007 19:33:54
Short text
Jump distance is too large and cannot be generated.
What happened?
A jump distance is too large and cannot be generated.
A control structure or a routine with "CHECK" or "EXIT" contains
too many ABAP statements.
Error in the ABAP Application Program
The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
determined that
within an ABAP event a control structure (for example, IF..ENDIF
or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
become too large. The resulting jump distance is too large so that
it could no longer be generated.
With the internal load format, the jump distance must not be
greater than 32768 (this is the size of approximately 10.000
ABAP statements).
The jump distance that is to be generated, however, is 50885.
How to correct the error
The ABAP application program must be changed. -
Error when generating program /SAPAPO/TSM141 and Errors in source system
Hello APO Experts!
I had to include a new key figure in the cube and the planning area with configuration semantic = 000.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" and u201CErrors in source systemu201D when trying to load data in the Infopackage.
Do you have any idea of what this could be?
Best Regards
NikHello,
The problem may come from the inconsistency between the datasource settings and the content in table /SAPAPO/TSAREATE.
- SE16, go to table /SAPAPO/TSAREATE, input the planning area name, check the extraction structure, which is started from '/1APO/EXT_STRU'.
- SE16, go to table /SAPAPO/TSAREAEX, input the datasource name, and check the extraction structure.
Are the two extraction structures the same or different ?
If they're different, please read the below solutions, otherwise, you can ignore the following.
In general and most customer cases this inconsistency happens during transporting of datasource alone. In many cases the planning area is directly created at target system and datasoucre transported from a a different system which causes incorrect export structure entry in planning area table.
Please refer to following content from note 549184:
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the structure of the planning areas. That's why the planning area MUST ALWAYS be transported with or before the DataSource.
The simple solution will be to create a dummy data source for this planning area. This will regenerate the extract structure for all other data sources as well and update the corresponding tables. After that you can delete the dummy datasource.
After delete the dummy datasource, in case of inconsistency, please also run the report /SAPAPO/TS_PSTRU_GEN report for
- Basis - form routines
- Create planning objects
- Planning area extractor
with the flags "Reset generation time stamp" and "Generate" set.
And in order to transfer datasource correctly, please also refer to the consulting note 514524.
Best Regards,
Ada
Maybe you are looking for
-
Hi there i will be receiving my Ipad 2 next week which is a 32gb Wifi version. Can i Tether my 3G signal from my Iphone using Bluetooth? Basically i would be looking to to get some sort of internet connection if i am not in a Wifi zone. If BT is not
-
Preview freezing when viewing large PDF
Since updating to Yosemite, I have found that when I open a large (book-sized) PDF using Preview, a couple of odd things happen. First, the book opens to the very last page, instead of the first. Then, when I try to scroll back (using any method - I'
-
Unison SSH Timeout [Solved]
[Solved]: It seems it was the B43 wireless driver. When I plugged my laptop directly into the router, Unison ran like a breeze. Gonna try WL once this is done syncing. Thanks for your suggestions! I hope you guys can help me out, because I'm at the e
-
MacBook Pro downloading trouble
My MacBook Pro is having trouble downloading files. The download window opens but the file disappears and I have to go into my downloads folder in order to retrieve it. This happens if I'm downloading files from anywhere, not just the internet. Today
-
What is going on with Lion??? Something has happened to my Mac Pro since I got Lion! I cannot save documents in Word, or at least if I do I have no idea where they are after I save then, Word does not know either! I have never seen this before? As a