Error when Generating the Selection Screen?
Hi Guys,
When i am executing the program with this code .I am getting this type of Error
" Source code ZUSFICOR00013_MM_ACNT_COSTING Line 0
Error when generating the selection screen "1000" of report
I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.
Hi Seshu,
While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi.
Similar Messages
-
'Error when generating the selection screen "0500"
Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
SachinHi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini -
Error when generating the selection screen '0005'of report 'XYZ'
Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
SaurabhIf you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob -
Error when generating the selection screen "0100" of report "SAPMZMATMAS
How to over come this error
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) TEXT-002 FOR FIELD P_STATUS.
PARAMETERS: P_STATUS(18) TYPE C." ZMATMAS-STATUS.
SELECTION-SCREEN COMMENT 24(8) TEXT-003 FOR FIELD S_MATNR.
SELECT-OPTIONS: S_MATNR FOR ZMAT-MATNR NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 100 .
100 screen i am generating as selection screen
1100 is my main screen
please reply,
Thanks in Advance.
VamsiIf you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob -
Error when generating the selection screen "1000" for Report ztest
Hi Experts,
I am getting this strange error while trying to activate my report. I simply copy paste report from my other system to new system it was working fine there. I also created all include program etc.
While I am trying to create "Selection-text" it is giving message that "Program contain some serious syntax error" while checking syntax saying that "Program is syntactically right".
Any idea how to solve this???
Regards,
GouravHere is the code::::
SELECTION-SCREEN BEGIN OF BLOCK select WITH FRAME TITLE text-sl1.
Component
SELECT-OPTIONS:
s_xcide FOR gw_zsmmess_compo-xcide
NO INTERVALS
MATCHCODE OBJECT zsm_xcide_oi.
SELECTION-SCREEN END OF BLOCK select.
SELECTION-SCREEN BEGIN OF BLOCK prcopt WITH FRAME TITLE text-sl2.
Default severity code
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-dsc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dfsevc LIKE gw_zsmglob_sever-sevco
OBLIGATORY
MATCHCODE OBJECT zsm_sevco
DEFAULT '3'.
SELECTION-SCREEN COMMENT 37(30) pt_sevtx.
SELECTION-SCREEN END OF LINE.
Minutes to wait before re-issuing alert
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-ria.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_aleexp(3) TYPE n
OBLIGATORY
DEFAULT '45'.
SELECTION-SCREEN COMMENT 37(10) text-min.
SELECTION-SCREEN END OF LINE.
Use component specific parameters Yes/No
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-cpu.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_usecsp RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rby FOR FIELD p_usecsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnucsp RADIOBUTTON GROUP rg1.
SELECTION-SCREEN COMMENT 35(10) text-rbn FOR FIELD p_dnucsp.
SELECTION-SCREEN END OF LINE.
Create/update component specific parameters automatically
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-cpc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_updcsp RADIOBUTTON GROUP rg2.
SELECTION-SCREEN COMMENT 35(10) text-rby FOR FIELD p_updcsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnccsp RADIOBUTTON GROUP rg2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rbn FOR FIELD p_dnccsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-afo.
SELECTION-SCREEN POSITION 33.
Fire one alert per component/error type combination
PARAMETERS: p_afrerr RADIOBUTTON GROUP rg3 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(50) text-afe FOR FIELD p_afrerr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per component (= outbound XI interface)
PARAMETERS: p_afrcom RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afc FOR FIELD p_afrcom.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per run
PARAMETERS: p_afrrun RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afr FOR FIELD p_afrrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-sel.
SELECTION-SCREEN POSITION 33.
Select messages since last run
PARAMETERS: p_lstrun RADIOBUTTON GROUP rg4 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(40) text-slr FOR FIELD p_lstrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Select messages in selected interval
PARAMETERS: p_mintvl RADIOBUTTON GROUP rg4.
SELECTION-SCREEN COMMENT 35(40) text-sin FOR FIELD p_mintvl.
SELECTION-SCREEN END OF LINE.
Message selection interval
SELECTION-SCREEN BEGIN OF BLOCK msgfilt WITH FRAME TITLE text-msf.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-icr.
SELECTION-SCREEN COMMENT 14(05) text-ifr.
SELECTION-SCREEN COMMENT 25(05) text-dat FOR FIELD p_stadat.
Select messages - start date
PARAMETERS: p_stadat TYPE d.
SELECTION-SCREEN COMMENT 46(05) text-tim FOR FIELD p_statim.
Select messages - start time
PARAMETERS: p_statim TYPE t.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(05) text-ito.
SELECTION-SCREEN COMMENT 25(05) text-dat FOR FIELD p_enddat.
Select messages - end date
PARAMETERS: p_enddat TYPE d DEFAULT sy-datum.
SELECTION-SCREEN COMMENT 46(05) text-tim FOR FIELD p_endtim.
Select messages - end time
PARAMETERS: p_endtim TYPE t DEFAULT sy-timlo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK msgfilt.
SELECTION-SCREEN END OF BLOCK prcopt.
SELECTION-SCREEN BEGIN OF BLOCK testopt WITH FRAME TITLE text-tso.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-tst.
SELECTION-SCREEN POSITION 33.
List only, no updates
PARAMETERS: p_lstonl RADIOBUTTON GROUP rg5 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(14) text-tsl FOR FIELD p_lstonl.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Execute updates
PARAMETERS: p_update RADIOBUTTON GROUP rg5.
SELECTION-SCREEN COMMENT 35(14) text-tsu FOR FIELD p_update.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK testopt.
*eject
INITIALIZATION. -
Error when Generating the Program
Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
SurenderI did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time 05/14/2007 19:33:54
Short text
Jump distance is too large and cannot be generated.
What happened?
A jump distance is too large and cannot be generated.
A control structure or a routine with "CHECK" or "EXIT" contains
too many ABAP statements.
Error in the ABAP Application Program
The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
determined that
within an ABAP event a control structure (for example, IF..ENDIF
or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
become too large. The resulting jump distance is too large so that
it could no longer be generated.
With the internal load format, the jump distance must not be
greater than 32768 (this is the size of approximately 10.000
ABAP statements).
The jump distance that is to be generated, however, is 50885.
How to correct the error
The ABAP application program must be changed. -
BW Statistics-BI7-Error when generating the update program
Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
RegardsHi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa -
Error when generating the text environment
Hi Friends,
When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
Err:sapgui:620
Error when generating the text Environment.
Please provide me the necessary help.
Regards
KhaiserHi,
Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
Do you see text elements if accessing the sytem using DE language ?
Regards,
Mike -
Error when generating the report in Production Server
Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
SamriddhiSamriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks. -
Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
KajalHi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal -
Error message at the selection screen while processing screen logic
Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Maheshhi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal -
Error when generating the update program RSAU484
Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ? -
Error when generating the update program
Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
ThanksHello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank -
Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
An error occurred during program generation for InfoSource
2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
amit shetyehi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep -
WAD-Internal Error when generating the history. Use a different view!
Hello,
When i am trying to open the WAD(Webapplication designer), BEx Open Dialog is being displayed with the message "Internal Error when generating the history. Use a different view"
how to solve this problem...?
Thanks
kumarHello Jeff,
Thanks for your help, and it has solved my problem. Under Activate Personalization in BEx...
I have seen 2 more options
-Variable Personalization
-Web Reportperson
Could you inform me the pupose of above 2 options?
Regards..
Maybe you are looking for
-
In Itines my albums seem to have seperated and instead of all the songs being listed under the one Album nake the same album name has a few here and then again another few. All the sings are there but if I play an Album I only get somoe of the songs.
-
Active Directory not binding in AD Plugin
I cannot bind to the Active Directory at work using the ActiveDirectory Plugin for the Directory Access utility. I keep getting the error message "Invalid Domain" If I try to ping server.domain.local it does not work. If I try to ping the IP of the s
-
Is it possible to get JobLog for the series of tasks ???
Hi Experts, I am new to Workflow, can u tell me the following is possible thru Workflow.. My requirement is such.. step 1 : Call a program with varaint in background step 2: Get the status of the job above Step 3 : depending on the Status send mail
-
For a migration I have created a sql script that puts the full statement to be executed in a specific table column I'm now looking for a way how to execute those statements. Table structure like: oldName, newName, sqlStatement, id, otherField, otherF
-
how do i change a jpeg file to mpeg