Error when I am executing any method in shopping cart

Dear All ,
I am getting following error when I am executing any method in shopping cart.
*"No data found for contact person 0000000244 . Inform system administration . "*
Please Can you help me with this error .

Your error states:
!syParameterNotFound,dDocTitle
Can you confirm that your profile includes all required data, specifically, the dDocTitle? Fix this issue, then re-check your logs. if there are other missing required parameters, fix each one.
Eventually, you should have a successful check-in.
Hope this helps,
-ryan

Similar Messages

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

May depend on which version of iPhoto you have installed.
Check out this thread > https://discussions.apple.com/message/15324917#15324917

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

Error when trying to execute ODI Interface

Hello,
I receive the following error when I try to execute an ODI interface. The interface contains two models trying to load a .csv file into an Oracle table. The models seem to be working and I can right click on the source file and "View Data". I have specifed LKM File To Oracle (SQLLDR), IKM Oracle Incremental Update, and CKM Oracle. But still receive this error on the fourth step of the execution "Loading - SS_0 - call sqlldr via Jython"
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?
OS command has signalled errors
 at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
 at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
 at com.sunopsis.dwg.cmd.e.i(e.java)
 at com.sunopsis.dwg.cmd.g.y(g.java)
 at com.sunopsis.dwg.cmd.e.run(e.java)
 at java.lang.Thread.run(Unknown Source)
Thank you for your help

Almost...
You need the sql loader where the "OS command" will execute it means where the agent is installed (once you will execute it from an agent when at production).
AND that machine where the agent is, need to "see" the target database through the Oracle Listener (tnsnames)....
Is just like to execute a Sql Loader from you own machine, but who write the command will be ODI.
Does it make any sense to you?
Message was edited by:
Cezar Santos

Runtime error when trying to execute transaction OB58

Hi all,
We have upgraded from SAP system 4.6c to ECC 6.0 . We are facing one error in the FI transaction OB58.
When trying to delete any finanicial version or trying to create any new financial version , we are getting a runtime error which
states that " Error when attempting to IMPORT object "X011F". and its giving short dump at this point .The description of the error is :
Short text
    Error when attempting to IMPORT object "X011F".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "FSV_POSITIONS_CONVERT" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "X011F", the component 1 in the dataset
    had a different length from the corresponding component of the
    target object in the program "SAPLFAGL_FSV".
    The length is 4 in the dataset, but 32 in the program.
Thanks,
Sumit

Hi Sumit,
We Upgraded our system from 4.6C to ECC 6.0 and
I am facing same error. We applied note 1544367. After applying not also we are facing issue during
import x011p to lt_x011p
         i011z to lt_x011z
         x011v to lt_x011v
         x011s to lt_x011s
         x011f to lt_x011f
from database rfdt(bs) client p_mandt
                               id p_versn
                        accepting padding
                         ignoring conversion errors.
You faced same issue after applying note or if you have any solution please let me know.
Regards,
Mahesh

Server error when calling the DatabaseController.replaceConnection() method

I am receiving the error message below when calling the DatabaseController.replaceConnection() method. Can anyone tell me what may be the cause of this? The code being executed is below the error message.


Thank you.

<pre>
A server error occured while processing the CrystalReport object, wfr.rpt (AVTJyRKrfDxKtXX31l5E9Ek), from the CMS.
 Unable to connect to the server: ATHENA.ReportApplicationServer.
 --- java.lang.Boolean cannot be cast to java.lang.String
Stack Trace:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server:
 ATHENA.ReportApplicationServer. - java.lang.Boolean cannot be cast to java.lang.String--
 Error code:-2147217387 Error code name:connectServer
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.
 throwReportSDKServerException(Unknown Source)
 at com.crystaldecisions.sdk.occa.managedreports.ras.internal.CECORBACommunicationAdapter.
 request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.replaceConnection(Unknown Source)
 at aiConfigUtility.cmdlline.ImportExportBiarFile.changeReportDataSource(ImportExportBiarFile.java:561)
 at aiConfigUtility.cmdlline.ImportExportBiarFile.processBiarFile(ImportExportBiarFile.java:726)
</pre>
 
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:13 PM

I just wanted to provide an update to this. I did find a work-around for this, but I cannot explain it. The post I added to a related thread on 23 Sept. 2009, Trying to change the data source for a Crystal Report. (thread 1472257), explains a work-around I found for that problem. It seemed to resolve this one simultaneously.


I don't know why it works. If anyone has a comment or some insight, it is welcome. Thank you in advance.

Fatal error when trying to execute a dml-command with OLAP API

Hi,
when I created an OracleConnection using the jdbc thin driver. The connection works fine.
But when I try to execute any dml-command with an SPLExecutor the following fatal error occurs:
oracle.express.idl.util.OlapiException: ORA-37118: Message 37118 not found; product=RDBMS; facility=ORA
ORA-06512: at "SYS.GENCONNECTIONINTERFACE", line 66
ORA-06512: at line 1
Any Suggestions ?

Hi Priya,
1.The entries for the initialization in the BW system are contained in the RSSDLINIT table for the DataSource/source system combination. Compare these with the entries in the ROOSPRMSC table in the OLTP system.
2. If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).
3.Once you deleted all the entries,In Infopackage scheduler option,delete all the init selections to proceed further.
In which system u r going to do this.....Quality or production.(Better,you check with basis to delete the entries.)
Regards
Kumar

Error when try to execute MemoryAnalyzer.exe

Hi,
I downoladed the Eclipse Memory Analyzer and extracted into a directory. I get the below error when I try to run MemoryAnalyzer.exe.
!MESSAGE Product org.eclipse.mat.ui.rcp.MemoryAnalyzer could not be found.
Any help is greatly appreciated.
Regards,
Rick

Hi Elena,
Here is the entire stack trace. Thanks for your reply.
!SESSION 2008-08-27 10:45:22.149 -
eclipse.buildId=unknown
java.version=1.4.2_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.equinox.app 0 0 2008-08-27 10:45:24.883
!MESSAGE Product org.eclipse.mat.ui.rcp.MemoryAnalyzer could not be found.
!ENTRY org.eclipse.osgi 4 0 2008-08-27 10:45:24.993
!MESSAGE Application error
!STACK 1
java.lang.RuntimeException: No application id has been found.
     at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:236)
     at org.eclipse.equinox.internal.app.MainApplicationLauncher.run(MainApplicationLauncher.java:29)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:382)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
!ENTRY org.eclipse.osgi 2 0 2008-08-27 10:45:25.493
!MESSAGE One or more bundles are not resolved because the following root constraints are not resolved:
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.493
!MESSAGE Bundle update@plugins/org.eclipse.mat.jdt_0.7.0.200808081658.jar was not resolved.
!SUBENTRY 2 org.eclipse.mat.jdt 2 0 2008-08-27 10:45:25.493
!MESSAGE Missing required bundle org.eclipse.jdt.ui_0.0.0.
!SUBENTRY 2 org.eclipse.mat.jdt 2 0 2008-08-27 10:45:25.493
!MESSAGE Missing required bundle org.eclipse.jdt.core_0.0.0.
!ENTRY org.eclipse.osgi 2 0 2008-08-27 10:45:25.508
!MESSAGE The following is a complete list of bundles which are not resolved, see the prior log entry for the root cause if it exists:
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.508
!MESSAGE Bundle update@plugins/org.eclipse.birt.chart.device.extension_2.3.0.v20080424.jar [15] was not resolved.
!SUBENTRY 2 org.eclipse.birt.chart.device.extension 2 0 2008-08-27 10:45:25.508
!MESSAGE Missing required bundle org.eclipse.birt.chart.engine_[2.1.0,3.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.508
!MESSAGE Bundle update@plugins/org.eclipse.birt.chart.device.swt_2.3.0.v20080522.jar [16] was not resolved.
!SUBENTRY 2 org.eclipse.birt.chart.device.swt 2 0 2008-08-27 10:45:25.508
!MESSAGE Missing required bundle org.eclipse.birt.chart.engine_[2.1.0,3.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.birt.chart.engine.extension_2.3.0.v20080611.jar [17] was not resolved.
!SUBENTRY 2 org.eclipse.birt.chart.engine.extension 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.chart.engine_[2.1.0,3.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.birt.chart.engine_2.3.0.v20080606.jar [18] was not resolved.
!SUBENTRY 2 org.eclipse.birt.chart.engine 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.emf.ecore_[2.2.0,3.0.0).
!SUBENTRY 2 org.eclipse.birt.chart.engine 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.emf.ecore.xmi_[2.2.0,3.0.0).
!SUBENTRY 2 org.eclipse.birt.chart.engine 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.core_[2.1.0,3.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.birt.core_2.3.0.v20080606.jar [19] was not resolved.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.emf.common_2.4.0.v200806091234.jar [37] was not resolved.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.emf.ecore.xmi_2.4.0.v200806091234.jar [38] was not resolved.
!SUBENTRY 2 org.eclipse.emf.ecore.xmi 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.emf.ecore_[2.4.0,3.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.emf.ecore_2.4.0.v200806091234.jar [39] was not resolved.
!SUBENTRY 2 org.eclipse.emf.ecore 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.emf.common_[2.4.0,3.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.mat.api_0.7.0.200808081658.jar [61] was not resolved.
!SUBENTRY 2 org.eclipse.mat.api 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.mat.report_[0.7.0.20080620,0.7.1).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.mat.chart.ui_0.7.0.200808081658.jar [62] was not resolved.
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.mat.chart_[0.7.0.20080620,0.7.1).
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.mat.ui_[0.7.0.20080620,0.7.1).
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.chart.device.extension_2.2.0.
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.chart.device.swt_2.2.0.
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.chart.engine.extension_2.2.0.
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.chart.engine_2.2.0.
!SUBENTRY 2 org.eclipse.mat.chart.ui 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.core_2.2.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.mat.chart_0.7.0.200808081658.jar [63] was not resolved.
!SUBENTRY 2 org.eclipse.mat.chart 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.mat.api_[0.7.0.20080620,0.7.1).
!SUBENTRY 2 org.eclipse.mat.chart 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.birt.chart.engine_2.2.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.mat.hprof_0.7.0.200808081658.jar [64] was not resolved.
!SUBENTRY 2 org.eclipse.mat.hprof 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.mat.parser_[0.7.0.20080620,0.7.1).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.571
!MESSAGE Bundle update@plugins/org.eclipse.mat.jdt_0.7.0.200808081658.jar [65] was not resolved.
!SUBENTRY 2 org.eclipse.mat.jdt 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.mat.api_[0.7.0.20080620,0.7.1).
!SUBENTRY 2 org.eclipse.mat.jdt 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.jdt.ui_0.0.0.
!SUBENTRY 2 org.eclipse.mat.jdt 2 0 2008-08-27 10:45:25.571
!MESSAGE Missing required bundle org.eclipse.jdt.core_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.586
!MESSAGE Bundle update@plugins/org.eclipse.mat.parser_0.7.0.200808081658.jar [66] was not resolved.
!SUBENTRY 2 org.eclipse.mat.parser 2 0 2008-08-27 10:45:25.586
!MESSAGE Missing required bundle org.eclipse.mat.api_[0.7.0.20080620,0.7.1).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.586
!MESSAGE Bundle update@plugins/org.eclipse.mat.report_0.7.0.200808081658.jar [67] was not resolved.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.586
!MESSAGE Bundle update@plugins/org.eclipse.mat.ui.help_0.7.0.200808081658/ [68] was not resolved.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.586
!MESSAGE Bundle update@plugins/org.eclipse.mat.ui.rcp_0.7.0.200808081658.jar [69] was not resolved.
!SUBENTRY 2 org.eclipse.mat.ui.rcp 2 0 2008-08-27 10:45:25.586
!MESSAGE Missing required bundle org.eclipse.mat.ui.help_[0.7.0.20080620,0.7.1).
!SUBENTRY 2 org.eclipse.mat.ui.rcp 2 0 2008-08-27 10:45:25.586
!MESSAGE Missing required bundle org.eclipse.mat.ui_[0.7.0.20080620,0.7.1).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-08-27 10:45:25.586
!MESSAGE Bundle update@plugins/org.eclipse.mat.ui_0.7.0.200808081658.jar [70] was not resolved.
!SUBENTRY 2 org.eclipse.mat.ui 2 0 2008-08-27 10:45:25.586
!MESSAGE Missing required bundle org.eclipse.mat.api_[0.7.0.20080620,0.7.1).
Regards,
Rick

M Having this error when ever i start any program in windows 7 professional 64bit. please help me

i scanned my for viruses but no viruses has been found .. i have also scanned my system for malware too and found some threads but now they all are removed .. but m still getting this error ''The Parameter Is Incorrect'' when ever i start any program a runtime
error occured..

Hi,
Could you let us know the exact and complete error message?
The easier way is to use
system restore to roll back to the previous point without any problem for test.
Karen Hu
TechNet Community Support

URGENT: ERROR when trying to execute ssoexp.csh script

Hello,
I am trying to execute the ssoexp.csh script and I keep getting an error. Here is some background info:
I am running the ssoexp.csh (UNIX) script from the production server.
Steps:
- Set the environment to the source <Portal_home>
- cd to the directory where the script is located
- set the ORACLE_SID to my development database (because I previously received an error that indicated to set the ORACLE_SID)
- ssoexp.csh -s portal30_sso -p ****** -d sspexp.dmp -c oracle.database
I get the following error:
SP2-0642: SQL*Plus internal error state 2165, context 4294967295:0:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:2:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:2:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:8:0
Unable to proceed
SP2-0642: SQL*Plus internal error state 2166, context 4294967294:3:0
Unable to proceed
SP2-0152: ORACLE may not be functioning properly
LRM-00109: could not open parameter file 'so_export.par'
LRM-00113: error when processing file 'so_export.par'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
PLEASE HELP!!!
Thank you,
Claudia Zanni

Hi Priya,
1.The entries for the initialization in the BW system are contained in the RSSDLINIT table for the DataSource/source system combination. Compare these with the entries in the ROOSPRMSC table in the OLTP system.
2. If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).
3.Once you deleted all the entries,In Infopackage scheduler option,delete all the init selections to proceed further.
In which system u r going to do this.....Quality or production.(Better,you check with basis to delete the entries.)
Regards
Kumar

Error : Subscreen not found when an item is added in the shopping cart

Hi all,
I click on a catalog and select an item to create a shopping cart. When I click on submit requisition, I am getting the following error on the screen.
What does this mean? This is for a specific catalog whereas others are working fine.
Error:
The URL http://amln434:8000/sap/bc/gui/sap/its/bbpsc01/ was not called due to an error.
Note
The following error text was processed in the system ED1 : Subscreen not found
The error occurred on the application server amln434_ED1_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLBBP_SC_UI_ITS

Hi,
What release of SRM are you using? If SRM 7.0 then the URL called is incorrect, ITS is no longer used for SRM nor are service files, Abap WebDynpro is used to render the SRM screens.
Give us some more information on the error and check for corresponding short dump in ST22, also check that if you are using ITS that the service exists in SICF and is active.
Regards,
Jason

Error in SOCO while trying to process a shopping cart

Hi SRM Experts,
We have SRM 7.0 with extended classic scneario. I have created free text shopping cart ordered successfully.
The status of SC is "approved". The SC is sourcing enabled. When I go to Sourcing cockpit and select the requisiton and press NEXT (for further further processing of assigning sourcing and creating draft PO), there is an error
"Requistion xxxx cannot be opened in edit mode".
I have tried with different sets of user s. Also, checked the SC in BBP_PD there are no error messages displayed.
Can you please help how to overcome this issue.
Thanks in advance,
Sundar K

Hi,
Is your SC open in edit mode in another window by any chance?
Regards,
Nikhil

Producat Category should not have any default value - Shopping Cart

Hi SRM Experts,
Presently I am getting default value for Product Category in SRM Shopping Cart Creation Web Browser Screen initial screen. But I dont require to have any default value. Please suggest me or provide a solution how I can get a solution for the above issue.
Thanks a lot in advance.
SRM Version - SRM 4.0
Thanks,
Sudarsan

Hi Lokesh / Muthu / Krish,
Thanks a lot for your response .
I checked BAdI (DOC_CHANGE) and Extended attributes also. I removed default prodcut category from extended product category and we are not maintaining the default Product Catgory values in BAdI also. Still I am getting default value while I am creating Shopping Cart with Describe Requirement Option. Please let me know is there any other solution for my issue.
Thanks,
Sudarsan

Error when trying to execute an Ant target

Hi!
I've imported some existing sources into a project in JDev 10g (9.0.5.2).
When I try to run an Ant task, I get an error (se below)
When I invoke the corresponding target from a DOS prompt it works.
I've tried adding all additional Ant addons that are used when running from DOS prompt without any luck (however, the commandline portion of the stack trace (java -classpath...") gets truncated.)
Anyone have any ideas?
The error:
Unable to execute Ant
java.io.IOException: CreateProcess: java -classpath D:\oracle\jdev10g\jdev\mywork\81\Project1\classes;D:\oracle\jdev10g\jdev\lib\ant.jar;D:\oracle\jdev10g\jdev\lib\optional.jar;D:\oracle\jdev10g\lib\xmlparserv2.jar;D:\oracle\jdev10g\lib\xmlcomp.jar;D:\oracle\jdev10g\jdev\lib\jdev.jar;D:\oracle\jdev10g\jdev\lib\ojc.jar org.apache.tools.ant.Main -Djdev.home=D:\oracle\jdev10g -buildfile D:\source\cvs-eu\main\dsserver\modules\server\build.xml compile error=2
 at java.lang.Win32Process.create(Native Method)
 at java.lang.Win32Process.<init>(Win32Process.java:66)
 at java.lang.Runtime.execInternal(Native Method)
 at java.lang.Runtime.exec(Runtime.java:566)
 at oracle.jdeveloper.compiler.ant.AntRunner.run(AntRunner.java:276)
 at oracle.jdeveloper.compiler.ant.AntRunner.run(AntRunner.java:227)
 at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProjectWithAnt(UnifiedBuildSystem.java:392)
 at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProjectFiles(UnifiedBuildSystem.java:302)
 at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:591)
 at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:664)

Have you modified the "J2SE Version" of the project (on the "libraries" tab in the "Project Properties" dialog)? That is where JDeveloper gets the version of Java used to run Ant. If that doesn't point to a valid JDK, then Ant won't be able to run.
-Matt Hawkins
JDeveloper Team

Error when I am executing any method in shopping cart

Similar Messages

Maybe you are looking for