Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Load data from PSA to ODS in Process Chain

Hi All,
I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
I just want to load data in the following Condition
1. Need to load data from R/3 to PSA.
2. Need to load data from PSA to ODS.
I need to include this two Info Packages in Process Chain.
I dont find any option to load PSA to ODS through Process Chain..
Pls Suggest.
Thanks,
Ram.

Hi Ram,
You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
Regards
Sunil

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Loading Data from PSA to ODS

Hi,
right now there are nearly 50 requests in my PSA. I want to load entire data from PSA to ODS at a time. Ours is 3.x flow. I m able to load one request at a time. Can anyone help me to load all requests at atime?
Please give me step by step.

Hi Narendra,
First of all all the records are unable to pick up at a time i single attempt due to. follow the reason
It is not possible to load all the PSA requests' to target at a time.Because records picks up from PSA to Data target one by one due dependencies of routine run on the data transfer up to the extent. anyway if you can do this thing the process of loading the requests' one by one, offcourse it is totally depends upon manual .
Hope you are understood the scenario.
Regards,
Vamsi Krishna Chandolu

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error in loading data from PSA to masterdataTables by using ProcessManually

Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
Soujanya

Hi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

How to load data from PSA in BI 7.0

Hi,
Gurus
I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
I will reward poaints
Regards
Alex

Hi,
I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
Try these steps:
1) Create and activate Transformation.
2) Create and activate DTP first then in DTP itself in <b>Execute tab</b> click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
*Please assign points if useful.

Error while loading data from PSA to DSO using DTP

Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
Thanks

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Error while loading data from PSA to DSO

Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.

Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum

Error while loading data from PSA to Infoobject through DTP(URGENT)

Hi-
I am running into an issue while loading the data from PSA to Infoobject.
It says
Data Package 1 : error during processing.
Updating Attributes for Infoobject
Error in substep
Process Terminated
Please let me know ur solution as this is very urgent....

Data Package 1 : error during processing.
This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
Let me know if you have any further query.

Error while loading data from write optimized ODS to cube

Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.

please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi.

Error when i am loading data from PSA to ODS

Similar Messages

Maybe you are looking for