Error when I change user privileges

I am using an Access Control List
and when I add a new user and click the apply button, I am getting the following error everytime.
anyone know what this is??
http://234.1.2.107/denied.htm?attempted-attack
Thanks

i got it
it was because of brackets, its like process success message does not like brackets
I had
#MRU_COUNT# row(s) updated and i changed it to
#MRU_COUNT# rows updated and it is working fine, I can recreate the problem by putting brackets back.....wierd

Similar Messages

  • Error when I change the BOM without a change number

    Hi,
    I would like to receive an Error when I change the BOM without a change number.
    I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
    In change the message type I don’t have the really message number in the liste.
    How can I create a new message (045) so that I get an error by changing the BOM without a change number.
    Thanks

    Dear Dede,
    check for the Authorization Object C_STUE_NOH for the
    particular User Id's for which you want to Create or Change a
    BOM without a Change number.
    So assign this Authorization Object under all user id's for which
    you want to have this control.
    Adding the mentioned Authorization Object in particular User
    Id's will resolve the problem.
    This can be done using PFCG T code by adding in particular
    Roles.
    Revert back incase of any clarifications.
    Regards
    Mangalraj.S

  • Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    in OIM 11g R2
    Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

  • Syntax error when creating a user-defined table type in SQL Server 2012

    Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
    CREATE TYPE ReportsTableType AS TABLE 
    ( reportId INT
    , questionId INT
    , questionOrder INT );
    Results:
    Msg 156, Level 15, State 1, Line 1
    Incorrect syntax near the keyword 'AS'.

    Hope these posts could help, 
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
    Regards, Dineshkumar,
    Please Mark as Answer if my post answers your question and
    Vote as Helpful if it helps you

  • How to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

    how to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

    Looks like the presentation column got Alias before your BMM changes, so in your case renaming logical column and deleting alias is not good to go.
    Keep Alias

  • Error when applying changes in Form

    I get the following error when saving changes in a form. The Form was created using the Report and Form application. If someone can pls help, I would greatly appreciate it!!
    ORA-20505: Error in DML: p_rowid=APL11163, p_alt_rowid=transcontrolnum, p_rowid2=, p_alt_rowid2=. ORA-06550: line 1, column 99: PLS-00201: identifier 'transcontrolnum' must be declared ORA-06550: line 1, column 9: PL/SQL: SQL Statement ignored
    Error Unable to process row of table APL_TRANSACTION
    OK

    You should check the source of your page items:
    P?_TRANSCONTROLNUM
    It looks like you don't have this column in your table or there is a typo in the source.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • I found an error when I changed the contact information.

    I found an error when I changed the contact information.
    Yesterday, I imported all my contact information from my old phone to my brand new iPhone 4S at an AT&T store. Everything looked fine, but all the first names and the last names were switched. So, I had to correct all contact information manually again. It was so ridiculous.
    When I corrected the contact information, the names on my contact list were not changed immediately. For example, when the name of a person, ‘Doe John’, was changed to ‘John Doe’, the name on the contact list was not changed and remained as ‘Doe John’. After I rebooted my iPhone, the name on the list was changed correctly. Do I have to reboot every time when I switched the first name and the last name?
    My iPhone Information
    IPhone 4S White 16G
    Model: MC924LL
    iOS Version: 5.0.1 (9A405)

    Is ths display order for contacts set the way you want it?
    Settings > Mail,Contacts,Calendars > Display Order

  • I always get "general error" when I change value of "Digitizer"

    I tried to capture a Prores422 project by FCP6 and Kano3 card.
    I changed setting of "Capture Preset Editor" to ensure capture what I needed.
    I think parameter value of "Digitizer" will determine Bit Depth of the project.
    The original value of "Digitizer" is "AJA 8-bit Digitizer". If I selected "AJA 10-bit Digitizer",it will pop up generel error.
    If I re-select the value to "AJA 8-bit Digitizer", it will still pop up general error.
    Please give me a hand.
    Is bit depth (8bit or 10bit) is determined by the setting of "Digitizer"?
    If yes, why does it always pop up general error when I changed it.

    From the information available it appears that your install could be conflicting with a previous version or installation.  I would recommend reviewing your installation logs to verify the root cause of your difficulties.  You can find directions on how to review your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • OWB10gR2: Insufficient privileges error when executing OMBREGISTER USER

    Hello,
    In the OMB Plus window I try to register a user as a OWB user:
    OMB+> OMBCONNECT OWB_SCHEMA_OWNER/PASSWORD@NODE:1521:DBSERVICENAME
    Connected.
    OMB+> OMBREGISTER USER 'target_user' SET PROPERTIES (DESCRIPTION,ISTARGETSCHEMA,TARGETSCHEMAPWD) VALUES ('DWH user','TRUE','password')
    ORA-01031: insufficient privileges
    First time I see this error, registered many more users on different OWB instances with this command. Anyone who has an idea what's wrong?
    Best regards, Erik

    Solved the problem by recreating the target schema; we first narrowed the problem down to this specific user, but could not find any deviations from other target users.
    Decided to recreate the target schema because we were running out of time. No real solution to the problem, but at least we can go on...

  • Error when selecting a user

    Hi everyone:
    We have implemented SAP NetWeaver 7.0, and we defined "ABAP System" as Data Source.
    We've come across a strange error while selecting some particular users (clicking on user) in Netweaver under User Management -> Identity Management > Selecting a User (clicking on user)
    "java.lang.NoSuchMethodError: com.sap.tc.webdynpro.services.sal.url.api.WDURLGenerator.isSecureURL(Ljava/lang/String;)Z"
    So far, this error has happened only when selecting a user that has the E-Mail field defined in the ABAP side. If we delete the E-Mail address from de ABAP account and then select the user in the Java Identity Management, the error disappears and the user account is perfectly shown.
    Any suggestions guys??
    Regards,
    Pablo Vaquero

    Hi Ravi,
    Thank for your reply.
    That indeed is the issue!... Since we have defined "ABAP System" as the Data Source, the E-Mail field can only be mantained on the ABAP side. But, as I've said on my previous post, when we fill this field in the ABAP side for any particular user and then want to see this change in user details on the UME side, when clicking on that particular user we get the error mentioned above.
    Regards,
    Pablo

  • Runtime Error when creating SUS user

    Hi All,
    I started configuring SUS demo for my client, but when i created user with role "SAP_BC_BASIS_MONITORING" and "SAP_EC_SUS_ADMIN_VENDOR",
    i am getting:
    Runtime Errors:  DBIF_RSQL_INVALID_REQUEST
        Short text:  Invalid call of database interface.
    Do i need to configure anything before creating SUS users with this roles? Please help me?
    Regards,
    Ravi
    Message was edited by:
            Ravi Varma Nadimpalli

    Hi
    Which SUS Verson are you using ? Are you using SUS on the same system, where EBP is installed ?
    You can create users and assign role to respective users in SUS for creating
    Bids in Bidding starting form SUS. But you must replicate users from SUS to EBP.
    Then only systems will identify each other while logging.
    <u>Meanwhile, Please go thrugh the following pointers and SAP OSS Notes -></u>
    Re: Clarifications on EBP-SUS and MM-SUS Scenario
    Note 893714 - SUS30: Replication of bidding users from SUS to EBP
    <u>Related Notes</u>
    1060329 - Mandatory check of form of address during user creation SUS
    895217 - SUS30: SUS not integrated with CUA currently
    880735 - UME/SUS: error with administrational user creation
    779658 - SRM40/SUS/BP: Error during change of employee
    Note 778483 - SRM-SUS: Force a user to change password on initial logon
    Note 1060329 - Mandatory check of form of address during user creation SUS
    Note 946159 - SRM-SUS 4.0: Termination when users are created
    Regards
    - Atul

  • "init failed " error when calling PRIV:UME  privilege for task  Create UME

    Hi All
    as per the document
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/304280b4-25d0-2b10-b6a4-89c27409dea7&overridelayout=true
    I  have done all the settings like this and when I call the privilege
    using PRIV:UME and subsequently the the create Ume, modify ume,delete
    ume tasks are not  working  but is giving  an  error u201C init failedu201D .
    I know the error is because some values should be set as an attribute
    or the repository constants of UME are not passed to these jobs.
    But there is no information on how to pass these values to these pass
    in the attached documentation or anywhere. The documentation you
    released are not complete .
    This is the same case with Create Java user, Modify Java user, delete
    Java user.
    Can any one give how exactly repository and other attributes values can be passed to the PASS of task
    Create UME user etc when we run the task by calling the Privilege.
    Please advice.

    Hi All
    as per the document
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/304280b4-25d0-2b10-b6a4-89c27409dea7&overridelayout=true
    I  have done all the settings like this and when I call the privilege
    using PRIV:UME and subsequently the the create Ume, modify ume,delete
    ume tasks are not  working  but is giving  an  error u201C init failedu201D .
    I know the error is because some values should be set as an attribute
    or the repository constants of UME are not passed to these jobs.
    But there is no information on how to pass these values to these pass
    in the attached documentation or anywhere. The documentation you
    released are not complete .
    This is the same case with Create Java user, Modify Java user, delete
    Java user.
    Can any one give how exactly repository and other attributes values can be passed to the PASS of task
    Create UME user etc when we run the task by calling the Privilege.
    Please advice.

  • Error when i change profile

    I am installing oracle10g on solaris10.
    I did every thing according to the manual. And everything was ok before I changed user oracle's profile.
    su oracle
    vi .profile
    then i add
    oracle_home...
    oracle_sid..
    when i saved it, there was always a error "permisssion denied"
    I searched many forum, but i cannot find any solution.
    I am not familiar with unix. I really don't know what happened.
    Thanks a lot
    Jennifer

    I am installing oracle10g on solaris10.
    I did every thing according to the manual. And
    everything was ok before I changed user oracle's
    profile.
    su oracle
    vi .profile
    then i add
    oracle_home...
    oracle_sid..
    .What's your oracle user's home directory?
    When do su , issue
    su - oracle instead of su oracle
    su - oracle will get your current directory to user home dir where the .profile should reside.
    su oracle will leave your current directory as is, which could be very possible the root user home dir.
    verify that by
    pwd

  • Error when attempting to assign privilege to role

    We've used the SAP Prov Framework to do AS ABAP Initial Load jobs on two different SAP systems, one SRM and one HR.  Both load jobs finish with a variety of errors, mostly to do with ValidFrom and ValidTo dates on the WriteABAPUsersRolePrivilegeAssigments job.
    Nonetheless, the user and privilege data is loaded into the temp tables and the IS, and seems to be valid.
    However, when we attempt to assign one of the privileges - from either system - to one of our roles, we get the following error:
    Method: Save Identity store privilege
    Source: clsEmcDb
    Error: FFFFFFFFh (-1)
    Description: IS_SetEntryAttribute failed : No Such task
    Can anyone offer any assistance on this please?

    Hello Geoff,
    although the issue has already been solved, here is the link to the
    landscape configuration guide. you find some important information
    on how to configure the provisioning framework here .. e.g. also
    including the setting of the mentioned repository constants.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706065c4-3564-2a10-2382-a52fcbd7eefb
    Best Regards,
    Steffen Baumann

  • Error when I change UNION to UNION ALL

    Hi,
    In the SQL below, I have a union in which I dont care about duplicates (in fact I know there wont be any). Hence, I want to avoid any overhead of sorting and checking for same, by replacing it with UNION ALL. The SQL runs fine with UNION, but complains when I change it to UNION ALL, which I cannot explain. The error message is "Error: java.sql.SQLException: ORA-00936: missing expression, SQL State: 42000, Error Code: 936"
    Here is the SQL:
    SELECT activ_I, activ_C, cases.I_OCCASTYP_CASES, cases.C_OCCASTYP_CASES FROM TOCCASE cases JOIN (
    SELECT I activ_I, C activ_C, I_OCCASE_RESULTINGFROM, C_OCCASE_RESULTINGFROM FROM TOCPROCESSINSTANCE activ JOIN (
    SELECT I_OCACTVTY_CHANGES, C_OCACTVTY_CHANGES FROM TOCTransferActivityChange x
    WHERE I_TO IN (2)
    AND C_TO = 1009
    AND CHANGEDATE <= to_date('2009-05-16 00:00:00','YYYY-MM-DD HH24:MI:SS')
    AND CHANGEDATE = (SELECT MAX(z.CHANGEDATE) FROM TOCTransferActivityChange z WHERE z.I_OCACTVTY_CHANGES = x.I_OCACTVTY_CHANGES AND z.C_OCACTVTY_CHANGES = x.C_OCACTVTY_CHANGES)
    ) latest_user_tx ON activ.I = latest_user_tx.I_OCACTVTY_CHANGES AND activ.C = latest_user_tx.C_OCACTVTY_CHANGES
    WHERE activ.C = 11200 AND activ.I_OCCASE_RESULTINGFROM IS NOT NULL AND activ.C_OCCASE_RESULTINGFROM IS NOT NULL
    UNION ALL (
    SELECT I activ_I, C activ_C, I_OCCASE_RESULTINGFROM, C_OCCASE_RESULTINGFROM FROM TOCTASK activ JOIN (
    SELECT I_OCACTVTY_CHANGES, C_OCACTVTY_CHANGES FROM TOCTransferActivityChange x
    WHERE I_TO IN (2)
    AND C_TO = 1009
    AND CHANGEDATE <= to_date('2009-05-16 00:00:00','YYYY-MM-DD HH24:MI:SS')
    AND CHANGEDATE = (SELECT MAX(z.CHANGEDATE) FROM TOCTransferActivityChange z WHERE z.I_OCACTVTY_CHANGES = x.I_OCACTVTY_CHANGES AND z.C_OCACTVTY_CHANGES = x.C_OCACTVTY_CHANGES)
    ) latest_user_tx ON activ.I = latest_user_tx.I_OCACTVTY_CHANGES AND activ.C = latest_user_tx.C_OCACTVTY_CHANGES
    WHERE activ.C = 11554 AND activ.I_OCCASE_RESULTINGFROM IS NOT NULL AND activ.C_OCCASE_RESULTINGFROM IS NOT NULL
    ) activity_transfers ON activity_transfers.I_OCCASE_RESULTINGFROM = cases.I AND activity_transfers.C_OCCASE_RESULTINGFROM = cases.C
    If I run the UNION ALL as is without the join to TOCCASE it works fine as well. The columns in each part of the union are the same so I have no idea why its failing.
    I am running the following version of Oracle:
    "Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production" (as returned from "select * from v$version")
    thanks for any info
    Edited by: user11176141 on 18-May-2009 03:15

    Thanks for the input!
    When I remove the bracket after the ALL keyword, I get the an error "Error: java.sql.SQLException: ORA-00920: invalid relational operator
    , SQL State: 42000, Error Code: 920". I assume this is because I had a corresponding closing bracket, so I removed that as well. However, I now get the error "Error: java.sql.SQLException: ORA-00920: invalid relational operator, SQL State: 42000, Error Code: 920". so as it is now the SQL reads
    SELECT activ_I, activ_C, cases.I_OCCASTYP_CASES, cases.C_OCCASTYP_CASES FROM TOCCASE cases JOIN (
    SELECT I activ_I, C activ_C, I_OCCASE_RESULTINGFROM, C_OCCASE_RESULTINGFROM FROM TOCPROCESSINSTANCE activ JOIN (
    SELECT I_OCACTVTY_CHANGES, C_OCACTVTY_CHANGES FROM TOCTransferActivityChange x
    WHERE I_TO IN (2)
    AND C_TO = 1009
    AND CHANGEDATE <= to_date('2009-05-16 00:00:00','YYYY-MM-DD HH24:MI:SS')
    AND CHANGEDATE = (SELECT MAX(z.CHANGEDATE) FROM TOCTransferActivityChange z WHERE z.I_OCACTVTY_CHANGES = x.I_OCACTVTY_CHANGES AND z.C_OCACTVTY_CHANGES = x.C_OCACTVTY_CHANGES)
    ) latest_user_tx ON activ.I = latest_user_tx.I_OCACTVTY_CHANGES AND activ.C = latest_user_tx.C_OCACTVTY_CHANGES
    WHERE activ.C = 11200 AND activ.I_OCCASE_RESULTINGFROM IS NOT NULL AND activ.C_OCCASE_RESULTINGFROM IS NOT NULL
    UNION ALL
    SELECT I activ_I, C activ_C, I_OCCASE_RESULTINGFROM, C_OCCASE_RESULTINGFROM FROM TOCTASK activ JOIN (
    SELECT I_OCACTVTY_CHANGES, C_OCACTVTY_CHANGES FROM TOCTransferActivityChange x
    WHERE I_TO IN (2)
    AND C_TO = 1009
    AND CHANGEDATE <= to_date('2009-05-16 00:00:00','YYYY-MM-DD HH24:MI:SS')
    AND CHANGEDATE = (SELECT MAX(z.CHANGEDATE) FROM TOCTransferActivityChange z WHERE z.I_OCACTVTY_CHANGES = x.I_OCACTVTY_CHANGES AND z.C_OCACTVTY_CHANGES = x.C_OCACTVTY_CHANGES)
    ) latest_user_tx ON activ.I = latest_user_tx.I_OCACTVTY_CHANGES AND activ.C = latest_user_tx.C_OCACTVTY_CHANGES
    WHERE activ.C = 11554 AND activ.I_OCCASE_RESULTINGFROM IS NOT NULL AND activ.C_OCCASE_RESULTINGFROM IS NOT NULL
    ) activity_transfers ON activity_transfers.I_OCCASE_RESULTINGFROM = cases.I AND activity_transfers.C_OCCASE_RESULTINGFROM = cases.C

Maybe you are looking for