Error when i release the biling dcoument to accounting in VF02.

Dear All,
I am getting the following error when i release the biling dcoument to accounting in VF02.
Kindly help me in getting the solution
Document date / / is incorrect in item 0000000001
Message no. F5 833
Diagnosis
Service financial accounting: document date " / /" is technically incorrect in item "0000000001" of the accounting document.
System Response
System erro in the calling application.
Procedure
Contact your consultant or SAP directly.
With Regards
Azeez Mohd

Refer SAP Note 1635985 - FBCJ: Document date not a required input field.
Also, refer following SDN thread - Error F5 833 Document date 00/00/0000 is incorrect in item 000000000
Regards
JP

Similar Messages

Error while releasing the billing document to accounting

Dear All,
I need your favor to resolve the below issue:
(System SAP SAP ECC 6.0)
User is getting the below error message while releasing the billing document to accounting in VF02:
This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
"Consolidated companies 151 and 186 are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
Thanks in advance,
Praveen

Hi Murali,
Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
Thanks,
Praveen

Error While Releasing the Billing Doc to Accounting.

Hi All,
When I am Releasing the Billing Document to Accounting the Value of JIN2 Condition Type is not getting released to Accounting. It is giving the Following Error.FI/CO Interface : Balance in Transaction Currency. I have all maintained the Account Determination. But Still I am facing the same problem.
Please suggest any Solution.
Thanks,
Prashant.

Hi Prashant,
Please check the following function in transaction SE37
(here you could check if the functions enhancement is in any project and
also if the function is active): EXIT_SAPLV60B_001 - 011.
Using transaction CMOD you could take a look at user exits that are
active in your system. Please de-active projects in particular relating
to the billing process than check whether the error resists.
Also check to make sure that there is not an unused user exit active.
Regarding to use exits created data inconsistencies please find the
attached note:
160211 Usage of USER_EXIT creates data inconsistency
Please also find the note
48431 Unused user exit runs
how to check if a user exit is active.
The list of user exits with specifications please find in the following
note: 301077 User exits for the interface to accounting
If these notes are not helpful please check another possible cause of
error F5702. Sometimes this error is triggered when the net value is
changed in pricing (userexit, own routine or formula). Please check also this
possible reason.
Cheers,
Alex

Error when I deployed the java EAR application in NWDS 7.1

HI All,
I got the error when I deployed the java EAR application in NWDS 7.1 version..help me out...........................................
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=[ERROR CODE DPL.DCAPI.1023] AuthorizationException.
Reason: , An error occurred during the deployer retrieval. Cause =[ERROR CODE DPL.DC.3151] The user LJ4PJW could not be authorized, because doesn't own the (com.sap.engine.interfaces.security.ServiceAccessPermission dc) permission for deploy controller. at com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
Thanks
Costa

The user LJ4PJW could not be authorized, *because doesn't own the* (com.sap.engine.interfaces.security.ServiceAccessPermission dc) *permission for deploy controller. a*t com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
The user is not have proper authorizations. Use some other administrators user id which has all admin roles and authorizations assigned and try to deploy.
Regards,
Ravi

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

Error when I open the new help in FCP7

I get a error when I open the new help in FCP7:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.

I have checked that Javascript was enabled in Safari (and it is).
I can read the documentation in Safari online using this link: http://documentation.apple.com/en/finalcutpro/usermanual/
I have now tried all the new/updated programs in the FCS3 suite they all have the same problem:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.
Mikael

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

Error when writing to the Internal Buffer-runtime error during querydisplay

Hi
I am working in BW 3.5. I am trying to run a query in BEx Analyzer but I am getting the following Error
Error when writing in the Internal Buffer see OSS note 156957
I tried for the note but I am not getting relevant information.
Please let me know what to do.
Thanks,
Padma

Hi,
please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
It should resolved your issue.
Thanks,
Venkat

Error when jumping to the OLTP system

Hi Gurus,
Some data loads are failed, when our BI consultant tries to analyse the issue, he getting the error " error when jumping to the OLTP system " " Screen output without connection to user"
We are using BI and ECC 5.0 as back end system.
Please let us know how to resolve the issu.
Thanks in advance
VJ

Hello,
I have changed user to Dialog user but still the the same issue.
Please guide me how to go ahead.
VJ

I found an error when I changed the contact information.

I found an error when I changed the contact information.
Yesterday, I imported all my contact information from my old phone to my brand new iPhone 4S at an AT&T store. Everything looked fine, but all the first names and the last names were switched. So, I had to correct all contact information manually again. It was so ridiculous.
When I corrected the contact information, the names on my contact list were not changed immediately. For example, when the name of a person, ‘Doe John’, was changed to ‘John Doe’, the name on the contact list was not changed and remained as ‘Doe John’. After I rebooted my iPhone, the name on the list was changed correctly. Do I have to reboot every time when I switched the first name and the last name?
My iPhone Information
IPhone 4S White 16G
Model: MC924LL
iOS Version: 5.0.1 (9A405)

Is ths display order for contacts set the way you want it?
Settings > Mail,Contacts,Calendars > Display Order

Error when I change the BOM without a change number

Hi,
I would like to receive an Error when I change the BOM without a change number.
I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
In change the message type I dont have the really message number in the liste.
How can I create a new message (045) so that I get an error by changing the BOM without a change number.
Thanks

Dear Dede,
check for the Authorization Object C_STUE_NOH for the
particular User Id's for which you want to Create or Change a
BOM without a Change number.
So assign this Authorization Object under all user id's for which
you want to have this control.
Adding the mentioned Authorization Object in particular User
Id's will resolve the problem.
This can be done using PFCG T code by adding in particular
Roles.
Revert back incase of any clarifications.
Regards
Mangalraj.S

Error when I create the New material Master (MM01) for New Plant.

Dear experts,
I got the error when I create the New material Master (MM01) for New Plant.
Error: Valuation Area 2800 Not yet productive with Material Ledger.
So Pl send me the solution asap.
Venkata Raju Khottari

Hi,
Have u assinged Plant to Company code?
If u say no, use T.code OX18.
Regards,
Murali
Assign points if it is useful.

Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

hi,
I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
An error has occurred. Maybe the request is not accepted by the server:
XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
Quick response will be appreciated

hi,
due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
anton

Get a "Download Error" when clicking on the "App" tab of Creative Cloud.

Get a "Download Error" when clicking on the "App" tab of Creative Cloud.

Yeah I finally had to call Adobe and some there did a screen share with me and they took care of it. I am running OSX 10.9.3 my issue was that the latex OSX update didn't communicate with the app. Like I said Adobe did a screen share with me and fixed it for me I think he just uninstalled and reinstalled and I want to say thats what took care of it.

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error when i release the biling dcoument to accounting in VF02.

Similar Messages

Maybe you are looking for