Error when I save in Elements 6
I'm creating a slideshow in Elements 6. When I go to save my project i get the following error: "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."
Any ideas on fixing this?
Thanks in advance!
Make sure your output resolution is not too large if you are burning to disc rather than saving on the hard drive.
VCDs use MPEG-1 compression and have a resolution of 352 x 240 pixels.
Similar Messages
-
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
Memory allocation error when burning in premiere elements 2
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erikamemory allocation error when burning in premiere elements 2
Erika Lindsay - 09:30am Jan 4, 2009 Pacific
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika -
There is an Error when I save the Indesign file!
There is an Error when I save the Indesign CC file!
Cannot save it after opening for awhile!
It makes me lost all my work!
[expletive deleted] Indesign!
Message was edited by: Peter SpierYeah, sure, swearing will help you.
Instead rather give important information, unless you just came here to complain and not wanting to ask for help.
1. What error?
2. Where is the file saved - local HDD or network?
3. Will "Save as..." work?
4. When closing ID and opening again, it should restore the files (data loss due to crash prevention) - will you then be able to save? -
I am receiving the following error when launching Adobe Premiere Elements 13
I am receiving the following error when launching Adobe Premiere Elements 13: Premiere Elements Debug Event Preferences.cpp-353 . I am running this on a Win 7 64 bit device on a Windows domain. The user is not a network/local administrator. Any ideas?
RogerCHS
Are you running the program from a Domain or Local Administrative type User Account? Apparently not Local Administrative by your description in the introduction?
Last time we had this type of issue, the user was coming from a Domain type of account. The issue remains in that thread unresolved although there was some intervention
by Adobe Staff.
https://forums.adobe.com/thread/1638947?start=0&tstart=0
Is yours a separate matter or are you related to the user in the other thread?
Please review and consider, supply more details, and then we can decide what next.
Thank you.
ATR -
Access denied error when user saves updated list item
After upgrading a site collection from Sharepoint 2010 to 2013, users with Contribute and Manage Lists permissions cannot save changes to items in lists. All permissions appear to be inherited correctly by the list and when running a permission check for
the user it returns the expected results. I also tried setting the list to use custom permissions but that didn't help. The logs show the following error when trying to save an item:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
A Sharepoint Designer form is used to edit the items so I don't know if that is related to the issue. After the upgrade the form would not load and was giving a different error until I opened it in Designer 2013 and saved it again. Editing items as a farm
administrator user works OK.Hi,
According to your description, my understanding is that the users cannot update the list items after migrating to SharePoint 2013.
Please check this article:http://technet.microsoft.com/en-us/library/gg251985.aspx.
This is taken from that article:
"Users who submit valid credentials when accessing the migrated web application might be notified that they do not have permissions. If this occurs, the portalsuperuseraccount property and the portalsuperreaderaccount property of the web application
were probably configured prior to migration. If this is the case, update the portalsuperuseraccount property and the portalsuperreaderaccount property to use the new claims-based account name. After migration, you can find the new claims-based account name
in the web application policy for the migrated web application."
Please update these accounts use the following PowerShell script to see if the issue still occurs:
$webApp = Get-SPWebApplication "http://<server>/"
$webApp.Properties["portalsuperuseraccount"] = "i:0#.w|domain\superuser"
$webApp.Properties["portalsuperreaderaccount"] = "i:0#.w|domain\superreader"
$webApp.Update()
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Why, when I open Premiere Elements 11 on my windows 8, do I get"Microsoft Visual C++ Runtime error. This application has requested runtime to terminate it in an unusual way.Please contact the application support team for more information."
Any solutions, thanks, Jim B.'jimmymega
We will follow up when you have time.
I am not sure if there is a misunderstanding in the communications. Please see
but how do I identify the "http://forums.adobe.com/message/5129399 ? Is there somewhere where there is the number 51229399?
When you click on that link, it should open to a thread with a discussion on troubleshooting the Microsoft Visual C++ Runtime Error situation. Did the link not open. It seems to be working. Please try clicking the link again and let us know the outcome.
Thanks.
ATR -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
Unknown Error when using save for web
When saving a gif using the "save for web" option in Photoshop CC 2014, I get a "Could not complete operation.An unknown error has occurred" message. I am using Mac 10.10.1. I tried deleting the "save for web" pref files but same error happens. Size of the file being saved (large or small) makes no difference. No problems saving files using "save as". Photoshop was uninstalled/reinstalled. Problem is still there.
I think the reason why this question is asked often is because the FAQ entry is pretty lame and incomplete, especially for Mac users that by default have a color managed browser and by default have a screwed up rendering mechanism for untagged images.
Depending on your version of Photoshop, you can convert to sRGB before or during the Save for Web operation.
cesspool13 wrote:
...I have been told that you are not supposed to embed the ICC profile in the document when saving for web because most monitors are untagged.
You convert to sRGB for the systems that do not fully support color management.
and...
You include the sRGB ICC profile for the systems that do support color management.
Doing both covers your bum in most situations. You may choose to omit the ICC profile if you are working on common interface graphics that do not require strict color management. The ICC profile adds a few kilobytes to the file size that are not necessary on lesser graphic elements on a web page. -
Error when trying to start Elements 9/
Question! Get error message after instaling Elements9, & try to start. Message reads, PhotoShop cannot start or continue because of missing file(s). Please reinstall. I have reinsalled many times & always get the same message when I try to start theElements 9. What do I do???
Hi Sorrey I am so late with this info,been out of action. I am using a Dell, Inspiron2320 all in one. Windows 7 home premium, with service pack 1. Prosseris,Intel(R) Core(TM)i5-2400S CPU @ 2.50 GHz 2.50 GHz Internal installed memory 6 GB
64-bit operating system
Hard Drive 1TB.
I had all the seriel numbers for the software & the insall went very smooth. The error message that some files are missingg 7 to reinstall he software comes up when I try to start the produst. I have tried & tried. am getting nowhere. maybe I should try a different phor editing software from another Co.
I have Adobe Premiere Elements that I instaled & that works fine. Any suggestions??? ameriroc -
Hi All
I am adding CKF's to the columns in the Bex query, then after when I Check or Save the query it is throwing the error which i have no idea, did any one face this issue before?
Error: [A299[Brain] Terminate: System error in program SAPLRRI2 and from CHECK_MAX_MEMBERS-01- (see long text)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
ThanksThis looks like a bug. I will enter a bug report. Thanks, Laura.
-
Scripting error when I save an Office 2003 document on a sharepoint 2007 infrastructure
Hi,
We have a local intranet based on a sharepoint 2007 where we store office 2003 documents. When we want to save changes on these documents, a scripting error appears like :
Line : 11727
Char : 12
Error : Unable to get value of the property 'length' : object is null or undefined
Code : 0
URL : https://intranet/_layouts/1036/bform.js
Do you want to continue running scripts on this page ?
We need to click several times on Yes button to be able to save the document.
We have been able to fix this problem by repairing Office 2003 client, but when a new user logs on the computer, the problem gets back on his profile (then a new repair from this profile fixes the issue).
We want to know if there is another solution, because we have 600+ clients which will encounter this issue and it will bother us to repair each Office 2003 client on each computer, specially during a Windows 7 migration process.
Our environment :
Windows 7 / Internet Explorer 9 / Office 2003 Std / Sharepoint 2007
ThanksI figured out a method to finally install Office 2010 bypassing the error stated in the title, by manually removing all the keys that included the term "Office 2003" from the Windows registry.
I share my fix with more details and pictures step by step here :
Link
Please note that you need to be very careful when manually editing the Windows registry as it may cause problems to your operating system and even cause a massive failure requiring you to re-format your disk.
Feel free to use my fix at your own risk. I will not be held responsible for any damage caused or data loss. -
Error when runing retropay by element
i processed 2 employees who are ex-employees as of last month but their Final close date have not been entered in the termination window.
Now when i run the retropay by element on these 2 employees i am getting the following error for one of the employee while for the other ex-employee the retro pay run has completed successfully .
Can some one tell me why 1 employee throws the below error?
Payroll: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RETROELE module: RetroPay By Element
Current system time is 03-MAR-2010 15:58:11
===============================================================================
Oracle Human Resources Generic Process
Started at : 03-MAR-2010 15:58:11
Chunk Size : 20
Threads : 1
Logging Category :
User Messaging : N
Interlock : N
Trace : N
RR Buffer Size : 500
RRV Buffer Size : 500
Bal Buffer Size : 500
EE Buffer Size : 500
Logging Area :
Assignment ID for Start:
Assignment ID for End o:
HR_6881_HRPROC_ORA_ERR
SQLERRMC ORA-20001: You cannot create an entry past the termination rule date.
Cause: You are trying to create an element entry for an employee assignme
nt which does not end before the termination rule date.
Action: Please remove your current changes.
ORA-06512: at "APPS.HR_UTILITY", line 939
ORA-06512: at "APPS.HR_ENTRY", line 1603
ORA-06512: at "APPS.HR_ENTRY", line 1986
ORA-06512: at "APPS.HR_ENTRY", line 3107
ORA-06512: at "APPS.HR_ENTRY_API", line 3745
ORA-06512: at "APPS.HR_ENTRY_API", line
SQL_NO 4517
TABLE_NAME insert_retro_entry
APP-PAY-06881: Error ORA-20001: You cannot create an entry past the termination rule date.
Cause: You are trying to create an element entry for an employee assignment which does not end before the termination rule date.
Action: Please remove your current changes.
ORA-06512: at "APPS.HR_UTILITY", line 939
ORA-06512: at "APPS.HR_ENTRY", line 1603
ORA-06512: at "APPS.HR_ENTRY", line 1986
ORA-06512: at "APPS.HR_ENTRY", line 3107
ORA-06512: at "APPS.HR_ENTRY_API", line 3745
ORA-06512: at "APPS.HR_ENTRY_API", line has occurred in table insert_retro_entry at location 4517
Cause: an oracle error has occurred. The failure was reported on table insert_retro_entry at location 4517 with the error text ORA-20001: You cannot create an entry past the termination rule date.
Cause: You are trying to create an element entry for an employee assignment which does not end before the termination rule date.
Action: Please remove your current changes.
ORA-06512: at "APPS.HR_UTILITY", line 939
ORA-06512: at "APPS.HR_ENTRY", line 1603
ORA-06512: at "APPS.HR_ENTRY", line 1986
ORA-06512: at "APPS.HR_ENTRY", line 3107
ORA-06512: at "APPS.HR_ENTRY_API", line 3745
ORA-06512: at "APPS.HR_ENTRY_API", line .
Action: Please contact your support representative.
Ended processing at : 03-MAR-2010 15:59:05
Total Assignment count : 12
Total Action count : 12
Successfully processed : 11
Skipped : 0
Unprocessed : 0
Errored : 1
Edited by: 594647 on Mar 3, 2010 7:57 PM"One of your retro element types will have a post termination rule of Actuel Termination, or Last Standard Process. But this should be Final Close, since retro wants to create an entry after the termination date."
Is it possible that it is the other way round that is may be the monthly earnings or deductions elements are defined as final close?
please help! -
Someone you have any idea how to copy files essbase otl, rul, dbb ... v9.3.1 to the 11.1.2.1?
I try to do but my application in essbase target (11.xx) fails to start. I have an error return
Thank you in advanceI agree when you post any content please make sure to Paste the detail info.
For your problem please try the below thing , Just locate .otl file from 9.3.1 version (C:\Hyperion\app\...)
Copy paste into some location.
Open eas console and try to import an outline and you will get the things.
Also you can try using LCM for Migration as well if you are planning for total Migration.
let me know i will paste some more detailed info incase of any issues.
Thanks,
KKT
Edited by: KKT on May 14, 2012 3:42 PM -
Getting these errors when trying to install elements 11 on my mac osx
WARNING: DW066: OS requirements not met for {FA19351D-E98C-48C1-B5E1-0C8C42B5E11C}
WARNING: DW066: OS requirements not met for {F7FD5B5C-CE79-4657-AEB7-B0EE4626C912}
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
----------- Payload: {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 -----------
ERROR: DW030: Custom Action for payload {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 returned error. Failing this payload.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 11: Install failed
ERROR: DW050: - Elements 11 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Elements 11 Organizer_AdobeElements11Organizer_en_US: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11: Failed due to Language Pack installation failureCasey2013
The Staff reply was at best curt and less than helpful
I'm also ripping out my har having bought the Elements 11 combined pack and no matter how I try to install (disk, internet download etc. it always errors out e.g.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s), 10 warning(s)
----------- Payload: {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 -----------
ERROR: DW030: Custom Action for payload {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 returned error. Failing this payload.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Premiere Elements 11: Failed due to Language Pack installation failure
ERROR: DW050: - Smartsound1 E11: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 11: Install failed
ERROR: DW050: - Elements 11 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Elements 11 Organizer_AdobeElements11Organizer_en_US: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Smartsound3 E11: Install failed
ERROR: DW050: - Smartsound2 E11: Install failed
ERROR: DW050: - Elements Common Frameworks 11: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe Premiere Elements 11_LangPacken_US: Install failed
This is my MacBook Air spec, which I believe exceeds the min requirements
Mac OS X Lion 10.7.5 (11G63)
Hardware
Model Name: MacBook Air
Model Identifier: MacBookAir4,2
Processor Name: Intel Core i5
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Hopefully we will get some added value support
Maybe you are looking for
-
HELP Can you see the missing parenthesis ?!
Dear People, I am doing a simple program that creates a ContactBook and allows keyboard entry of lastName, telephoneNumber and emailAddress. I have a few error messages that say parenthesis missing but I don't see any missing ! : "Note.java": Error #
-
How to make use of the FM EDIT_TEXT_FORMAT_DOC
Hi frnz, How to make use of the FM EDIT_TEXT_FORMAT_DOC Could anyone explain with an example how to use this regards
-
Unable to Invoice Intercompany STO delivery
Hi, We have an Intercompany STO wherein we are unable to call out the Delivery to Invoice. What should be checked to sort this out. Please advice. Regards, Sophia Xavier.
-
Should I keep the serial # label on the box?
I am going to move and need to get rid off the box, should I take the serial # label off my PB box? Do I need to keep that label for any future use? Thank you!
-
Can you get iChat for windows or is it just for macs???
Is iChat just for mac's or can you get it for windows?? and if so how?