Error when i try buy adobe media server

Hello, I am from Bolivia. I try to buy "Adobe media server" but i got this error " the account was registered for a different country. Please sign out and sign in using an existing account for this country"

Thanks Igor!
I understand that in order to run Process Flows from within OWB, I do not need HTTP server. But I want to be able to schedule the "Process Flows" and some of the documentation I have read suggests that I need to configure and run HTTP Server. I am not quite sure if OEM fits into this process, too?
Could you kindly let me know if I'd need to schedule the jobs through OWM or OWF Manager is enough?
Also, whether we can run non-OWB jobs using OWF - for example, a PL/SQL Package and/or a Unix script? If the answer is yes, what is required to accomplish this? My organization does not have a job-scheduling tool and I want to find out if OWF can do this for us.
Thank you once again and I look to hearing from you soon.
Best regards,
Amer

Similar Messages

PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6

Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
PProHeadless.exe has stopped working
I tried rebooting, and it still gives me the same error. Sometimes the project will load, sometimes it won't.
The Premiere projects contain a H.264 .mov file coming from my Canon T2i. I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc. Sometimes I also have a .wav file recorded from a Zoom H4n, but not always. I usually edit those in Adobe Audition with the remove noise feature.
I am running on Windows 7 Ultimate 64-bit. I'm using an i7 with 16GB ram and an ATI 6870 video card.
I have the LUT buddy plugin installed.
It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail. Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
Any help anyone could provide would be appreciated.

Hi Dima,
Thank you very much for your prompt reply. Dragging the sequence from PPro to AME made AME lock up. But your second suggestion of exporting the video directly from PPro seems to be working. I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
Thank you once again!
(although it would be nice if I could go through AME just in case)

Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Error when I try to run HTTP Server

Hi there,
I am trying to start HTTP server so that I may setup and use WorkFlow (Process Flows). I am using OWB 9.2 and Workflow 2.6.2 on Windows XP. Here is what I get when I start the HTTP Server:
-------------------- in a DOS Window ----------------
Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf:
FastCgiServer: redefinition of a previously defined FastCGI server "c:/oracle/ora92/bin/isqlplus"
Note the errors or messages above, and press <ESC> key to exit. ...
I tried reinstalling HTTP server but it did not help. I am not sure what is wrong and hot fix it. I think without HTTP server, I may not be able to run my "Process Flows".
Please advise!
TIA,
Muhammad Amer

Thanks Igor!
I understand that in order to run Process Flows from within OWB, I do not need HTTP server. But I want to be able to schedule the "Process Flows" and some of the documentation I have read suggests that I need to configure and run HTTP Server. I am not quite sure if OEM fits into this process, too?
Could you kindly let me know if I'd need to schedule the jobs through OWM or OWF Manager is enough?
Also, whether we can run non-OWB jobs using OWF - for example, a PL/SQL Package and/or a Unix script? If the answer is yes, what is required to accomplish this? My organization does not have a job-scheduling tool and I want to find out if OWF can do this for us.
Thank you once again and I look to hearing from you soon.
Best regards,
Amer

Questions on the capabilities of the Adobe media server and system requirements

Hello
We need to send multiple video streams on different computers and screens in our organization. To do this, we need a dedicated server with the following functionality:
- transmit up to ten (or even more) HD and FullHD streams simultaneously
- manage playlists in real time without relaunching stream every time after adding items to the playlist
- imposing of any text and video effects
- use a variety of sources: a folder with pictures for the slideshow, video and audio files, video capture devices, video streaming from other resources
Is Adobe media server suitable for our tasks?
What are the system requirements (I do not mean minimum requierements)?
If we buy adobe media server, will it be enough? Or we will have to buy additional software products to provide all the necessary functionality?
Thank you.

1 and 2 is possible
3 is not
4 AMS is not an encoder and does not encode or create streams.You have to use other software for that.Adobe FMLE is for live streaming...Use third part software like manycam(a virtual webcam on your machine) to generate video sources out of slide shows.

RTMFP LIMITS ON ADOBE MEDIA SERVER 5 EXETNDED ????

hi everybody first of all i'd like to apologize for my english . it's not perfect because i'm still learning .thanks in advance.
well i have a question and until today i didn't find an exact answer even with google and in forums.
in the adobe media server comparison ( http://www.adobe.com/products/adobe-media-server-family/buying-guide-comparison.html ) it is said that adobe media server 5 extended has a limit of 15000 RTMFP P2P INTRODUCTIONS.
i'm not able to figure out what does that mean ?????????
* does it mean that only 15000 users can connect to adobe media server via rtmfp and after they can connect each other ? or
* does it mean that only 7500 couple of 2 users can be connected ?
i'd like to know exactly what this limit stands for ??????????
me and some friends are making a real time chat with webcam and audio and we plan to buy adobe media server 5 extended even tough the price is expensive !!!!!!!!!! that's why we want to know to take this limit in consideration.
wa made some tests but just with adobe starter and it works great.
thank you .

i can only find the AMG installer "installAmg.sh" in "AdobeMediaGateway_5_LS1_linux64.tar.gz" from the original AMS 5.0.1 starter download bundle.
i do not see the installer for AMG 5.0.3 anywhere in the AMS 5.0.3 linux update download.
thanks!

Adobe Media Server DVR only 5 second recording

I have a strange problem. I have an application built in Flash Builder.
When I record to Flash Media Server I don't have any issues, it'll do DVR for as long as I want. But when I record to Adobe Media Server, the recording is only 5 seconds long.
ns = new NetStream(nc);
ns.client = new Object();
userUID = UIDUtil.createUID();
ns.attachAudio (mic);
ns.attachCamera (camera);
ns.publish( "demo" + userUID, "record" );
Later I can play the recording, timestamp says that it's a 5 second archive, but it'll really keep playing the recorded video.
Same code, just different server.
Has anyone had this problem when migrating to Adobe Media Server from Flash Media Server? Using Amazon.

I'm having this issue as well. Did you ever find a solution to it?

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

Get error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)

I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
Operating System is Windows 2008 R2 64 bit

Hi JamesRead,
According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
you must have administrative rights on the computer.
There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
prompt and check if it can install successfully.
You can prepare an installation of database engine instance to include product update:
setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
For more information, you can review the following article about installing Updates from the Command Prompt.
http://technet.microsoft.com/en-us/library/dd638066.aspx
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

Apple ID couldn't be created because of a server error when i try to restore from a backup

Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud?
Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!

I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud.

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why?

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?

Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB

TS3988 I get an unable to contact server error when i try to sign in..I don't see where there are outages.

I get an unable to contact server error when i try to sign in..I don't see where there are outages.

I am also having this problem.
I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error.

Error when i try buy adobe media server

Similar Messages

Maybe you are looking for