Error when i try to Activate BC Set for Charm
Hi gurus,
I´m trying to activate the BC Set for charm via spro and the following error message apear when I try to activate that.(solman 4.0 sp 16)
"SAP ChaRM auto-configuration warnings"
"Message no. IMG_FASTCONF028"
Any idea for this?
Regards,
Ignacio.
Hi,
Usally the error message will come when you activate try to activate the same BC set two many times and also if you open the spro page in another screen when you try to activate the Bc set parallel means. the error message will throw.
So before activating the BC set have look of the logs of the BC set in the same tcode. SCPR20.
Then have a look in sm50 if anyone is usin ghte SPRO or someother screen it may cause the error. so end other sessions and activate the same.
Hope this will help u
Regards
Vijay
Similar Messages
-
Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? I have all of billing info up to date, changed my password etc etc and still get an "unknown error" message. Help!
- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store and sign out and then sign back in. -
I get an error when I try to activate iCloud backup on my iPad
When I try to activate my iCloud backup, I get an error message. I simply says that there was an error. I've tried many times and the same thing happens
Wi-Fi is enabled on your iPad?
iOS: How to back up -
"Unsupported Apple ID" error when I try to activate iCloud on my iPad.
I get an "Unsupported Apple ID" error stating my Apple ID cannot be used to sign in to iCloud when I try to activate it on my iPad. Any ideas why my Apple ID wouldn't work?
I think the feature has been disabled by the Enterprise Software installed on the devices (I use both devices for my work). I will reconfirm it though.
Regards,
Kaustuv -
Am receiving an error when i try to activate cloud with outlook.
Unhandled exception at 0x000007fee3bd0853 in AppleOutlookDAVConfig64.exe: 0xC0000005: Access violation reading location 0x0000000000000000.
Hi jerryc126,
Please refer to the KB Doc : http://helpx.adobe.com/creative-suite/kb/troubleshoot-update-issues-cs5-cs5.html
Regards,
Rave -
PHE 6.0 get error when I try to search my computer for pics to put in the program.
I go to file and click get photos and videos by searching. It finds all the files then an error comes up saying import failed.
I really need help with this.
thanks.Try repairing the catalog through File->Repair.It may be that the catalog is corrupted that's why this message is given to the user.
Also if you try to import file directly are you able to do so.You can do this by going to File->Get file and folders from.A dialog box will open up and then you can browse to that location. -
Java error when i try to scan a check
I Get a Java error when I try to scan a check for remote deposit. Any help to correct the following error will be greatly appreciated:
Java Plug-in 1.6.0_24
Using JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VM
User home directory = /Users/ginahumphrey
Java Plug-in 1.6.0_24
Using JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VM
User home directory = /Users/ginahumphrey
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.lang.NoClassDefFoundError: Could not initialize class SK.gnome.twain.TwainManager
at bluepoint.homescan.client.model.TwainHelper.getSourceList(TwainHelper.java:123)
at bluepoint.homescan.client.presenter.MainPanel1Presenter.initScannersComBox(Main Panel1Presenter.java:465)
at bluepoint.homescan.client.presenter.MainPanel1Presenter.<init>(MainPanel1Presen ter.java:242)
at bluepoint.homescan.client.MorenaStudio.init(MorenaStudio.java:29)
at sun.applet.AppletPanel.run(AppletPanel.java:424)
at java.lang.Thread.run(Thread.java:680)Having the same exact problem! I get:
Exception in thread "thread applet-bluepoint.homescan.client.MorenaStudio.class-1" java.lang.NoClassDefFoundError: Could not initialize class SK.gnome.twain.TwainManager
at bluepoint.homescan.client.model.TwainHelper.getSourceList(TwainHelper.java:123)
at bluepoint.homescan.client.presenter.MainPanel1Presenter.initScannersComBox(Main Panel1Presenter.java:465)
at bluepoint.homescan.client.presenter.MainPanel1Presenter.<init>(MainPanel1Presen ter.java:242)
at bluepoint.homescan.client.MorenaStudio.init(MorenaStudio.java:29)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Plugin2Manager.ja va:1640)
at java.lang.Thread.run(Thread.java:680)
The process has worked on and off but now it never works. Someone please help us! -
When I try to activate my home sharing on iTune I get this error message."home sharing could not be activated because an error occurred(-2146762487)" .How can I solve this problem?
I have a brand new iMac with all the newest updates etc etc, Safari logs me in without any problem but iTunes etc is just not working.. and I have the same message...Any ideas how to resolve this?
"Home Sharing could not be activated because an error occurred (5506)." -
When I try to activate my FaceTime, I get an error msg that says, "An error occurred during activation. Try again." I have a good password (I used it to get here...); I'm on WiFi; I've toggled FT off and back on again but I cannot get past the error message and get activated. What's wrong? Thanks. Talking about my iPhone (4).
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
-
I keep getting "Error Subject token invalid" when I try to activate HBO GO on my Apple TV 3.
I keep getting "Error Subject token invalid" when I try to activate HBO GO on my Apple TV 3. Everything else is activating fine. My ISP is XFinity. Anyone seen this? I have done a complete reset and restore, and have the latest software.
Hello dprice3885,
Thanks for using Apple Support Communities.
Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario -
My iMessages and FaceTime are offline.. When I try to activate my apple id account.. it says The server encountered an error processing registration. Please try again later. What should I do in this case?
Hey radyslav,
There's an article that applies to your situation, I'd follow the steps within here:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Take care,
Delgadoh -
on my ipod touch i have wi fi connection but when i try to activate imessages and try and enter my Apple ID, it comes up with error saying could not sign in, check your network connections and try again!!!
Tap Settings > General > Reset > Reset Network Settings then restart your iPod.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears. -
error in changing modules when i try to activate the program
Moving this discussion to the Photoshop Lightroom forum.
-
Fel: 0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed
This is what i get when i try to activate contacts in the icloud control panel and no contacs are syncronised.....
iPhone 3GS, Windows 7After much some reasearch I fixed this problem for my problem computer. I have two computers running Windows 7 64-bit, one working with iCloud contact/calendar sync and the other getting this "0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed" error (when you look at the report data to Apple).
So when I compared my system to a working system, I found that there was a difference in the bit-named DLL used by iCloud.
Go to Outlook, File, Options, Add-Ins and in the Active Application Add-ins section highlight "iCloud Outlook Addin". You'll find the DLL name there.
On my working computer, it was APLZOD6432.DLL, while on my problem computer it was APLZOD32.DLL. Ah ha! Its trying to setup Outlook 64 with a 32-bit iCloud DLL. Or so I thought.
I looked for a 64-bit specific install for iCloud. Nope, iCloud 1.1 is for both. Hmmm...
I thought I had installed Office 2010 64-bit on my problem computer, but apparently I installed 32-bit. I was able to confirm this by going into Outook, File and Help. Under "About Microsoft Outlook" it said 32-bit. Checking the working computer, it was showing 64-bit Outlook.
So this also brought another thought to my mind. Maybe the problem is because I installed the iCloud control panel before I installed Office 2010. That said, I uninstalled iCloud Control Panel (Add/Remove Programs), and re-installed it from the manual download page http://support.apple.com/kb/DL1455 and tried contact syncing again. It worked!
Then I went to check the DLL in use. It was APLZOD32.DLL. So perhaps iCloud sets up for 64-bit Office when no office is installed on Windows 7 64-bit and breaks when you install 32-bit. Or there is a part of iCloud install that needs to be done with Office installed. Either way, I'm happy to have the issue fixed. Leaving the 32-bit Office there for now. -
"Unauthorized Host" error when you try to connect to the admin server
"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P>"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P>
Maybe you are looking for
-
Help! Am trying to change the speed of a film clip and am having probs
Hi there all, this is my first foray into Apple Supp Communities, so thanks in advance for your help:) I have downloaded an 8min HD video from my new Panasonic camera into imovie. All good. Now for some reason when I click on the movie it is halved i
-
Set classpath in Window 95, 98, ME
Hi, Would anybody please show me how to set the class path in windows 95, 98, ME. I used: set classpath=c:\ but it did not work Thanks
-
The latest flash player keeps on crashing
Hi there when is
-
Tips for Using Containment Relationships (When Are They Required?)
Hello again, Our team was recently discussing when to use containment relationships, and we realized that there is room for improvement in our understanding. Having read many of the help topics, the primary use for containment relationships seems to
-
Hello, This is conistently so: I choose print, pick 'list' from the drop down menu, hit continue. 'Assembling calendar' appears and then iCal quits. Not good. Any advice ?