Error when I try to look at the files backed up

Every time I use time machine it seems like its fine and I have an external disk. When I take my external disk so my friend can use it to take photos it comes up with an error that says error code-10657 which I have no idea what that means. I can't get into anything when i try to look on my computer and on others people's computer on my backup disk. How do I fix this or what is wrong?

If you search Discussions for that error you get for instance the following threads:
http://discussions.apple.com/thread.jspa?threadID=1711873
http://discussions.apple.com/thread.jspa?threadID=1448412
Your TM backup is connected to the computer it backs up. Have you tried "browse other Time Machine disks" in the TM menu in the menu bar when the external is connected to your friend's computer? Perhaps that will work.
/p

Similar Messages

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". I cannot now access iTunes. How can I resolve

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thanks

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

Show-stopping error when I try to load/run the muse code with JQuery version 1.9.1.

Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?

Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?

I need to download Runtime Engine 7.1, but I get a 404 error when I try to download from the website.

I need to download Runtime Engine 7.1, but I get a 404 error when I try to download from the website.

Are you getting it from this link (assuming Windows): http://joule.ni.com/nidu/cds/view/p/id/703/lang/en? The download link on that page seems to work just fine.

Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone no longer play), unable to transfer to computer either. Says Parameter error when I try to copy or play file

My Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone), unable to transfer to computer either. Says Parameter error when I try to copy or play file. very frustrating, not being able to access past videos taken at all. This has been going on for a while now

Have you done any of the basic troublshooting steps described in the User Guide (Appendix B) - Restart, Reset, Restore?

Finder crashes when I try to click on the File Menu, or CTL Click. Ideas?

Started a few weeks ago, after the update to Mavericks.
Anytime I try to click on an item via Finder, and CTL+click to have the drop down menu, Finder crashes. Same thing happens when I try to click on the File Menu when Finder is selected.
Ultimately, I may need to do a full clean install (It's a bit overdue), but this seems to be an account specific issue, as my wife's user account does not have this issue.
To Note: I do not, nor have I ever, use Google Drive. So it's not that.

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

I upgrade ios 4 to ios 5.It is completed but when i try to restore all the apps back up before,at last it's written the apps cannot be found(all the apps).

i upgrade ios 4 to ios 5.It is completed but when i try to restore all the apps back up before,at last it's written the apps cannot be found(all the apps).

The backup that itunes performs does no include any itunes content ( apps/music/vids/etc).
You should have transferred any purchases to your computer.
If you failed to do this, then you will have to redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Error when i try to open any quicktime file...

First it comes up with the error for that file like
Alert
Quicktime cannot open the file:
"Prison.break.S01E10.HDTV.Xvid.LOL.avi"
an unknown error has occured (-1856)
then i press ok then a second error comes up
Alert
Quicktime cannot open the file: "trampoline.mov"
an unknown error has occured (-1856)
and i have only tried to open the first file, not the second.

You probably need the XVID codec to view that .avi
file.
The trampoline.mov is inside the QuickTime Player
app. It is used to "bounce" you to the online Content
Guide. You can turn this feature off in the QT
Preferences. Remove the check mark to show the
Content Guide.
Does DivX for Mac play thys type of file?
Cheers,
Paulo

YouTube says there is an "Authorization Error" when I try to get on the site with Firefox. Can I fix this?

When I try to get onto YouTube, the site is completely white with the words "Authorization Error" in the top left corner. For a while, all I had to do was reload YouTube and it was fine. Now it just won't work at all. I have Internet Explorer on my computer as well and YouTube works fine on there. When this error occurs, the icon in the address bar changes back to YouTube's old icon.
I have tried:
-Updating Firefox
-Restarting the computer
-Closing and re-opening Firefox
-Typing https instead of http before the address
-Googling and clicking Google's link to the site (yes, a feeble attempt, I know)
Does anyone know what I can do to get YouTube back on my favorite browser? I'd like to stop having to run to Internet Explorer to use this site.
Thanks!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

I went into the original files in the iphoto library and organised the photos there, now when I try to look at the photos in iphoto the tiles are there but when I try to enlarge or put into a slide show a big grey explanation mark occurs?

I tried to organise my iphoto originals to it would be easier to back them up onto my hard drive, so I renamed them and grouped them in the orinigal file. Now when I go onto iphoto to view the photos in a slide show a big exclamation mark comes up and if I click on the photo to see the original file it can't find it. Any ideas?

You won't be able to run the rebuild function and restore your library becaue you renamed and regrouped your original photos from the Finder. I doubt if you can change the names back to their original names and put them back in the folders they were in originally so your only option is get your backup library and replace the one you damaged.
If you don't have a backup copy of the library from just before the problem that contains all of your photos you will need to start over from scratch as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.
In the future stay out of the iPhoto Library package and only access the photos using iPhoto.
OT

Preview error: When I try to look at an effect in Bridge I see no preview.

I looked in the settings and tried to find an option to correct this but could find none. Basically all it says is the effect name in the preview box (ex. "name.ffx") but doesn't show the actual preview. Does this have something to do with GL previews? Can anyone help?

Has this ever worked for you or is this new?
Are you sure you're looking at the correct files? The only ones that preview for me in Bridge are Presets.

Windows 2k8R2 - Receiving Error when logging in ( MMC Cannot open the File: C:\Windows\system32\ServerManager.msc)

Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
MMC Cannot open the File:
C:\Windows\system32\ServerManager.msc
This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
PM

Has the system update readiness tool been run without error?
http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
You can also try creating a new MSC
Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Got an iMac and used migration tool (PC to Mac). When I try iTunes i get The file "iTunes Library.itl" cannot be read because it was created by a newer version.... download iTunes now? but i have it already???

I just got an iMac and used migration tool (PC to Mac). When I try to then open iTunes i get the message
<The file "iTunes Library.itl" cannot be read because it was created by a newer version.... download iTunes now?>
...but i have it already downloaded, when I press download now, it tells me I already have it, but it still won't let me open iTunes???

Unless you've tried to install an older version of iTunes that message likely indicates a corrupt library file. See Empty/corrupt library after upgrade/crash...
tt2

Error when I try to look at the files backed up

Similar Messages

Maybe you are looking for