Error when I try to record application simulation in Adobe Presenter 8

Hello, I have a 30 day trial of Adobe Presenter 8 and a subscription to Adobe Captivate 6.  I would like to record an application simulation within Presenter, but I receive an error after entering a SWF-Name that states that Captivate cannot be started and to check to see if Captivate is configured to be run in administrator mode. (Captivate is actually already open in admin mode.)
Any suggestions?
Thank you!  Ryan 

Hi Mahesh --
I have Adobe Captivate 6 and use Windows 7 Enterprise.  Below is a screen shot of the error.  Unfortunatley, it is in German, but it says  : Adobe Captivate can't be started.  Check to see if Adobe Captivate is configured to be run in adminstrator mode.  If so, configure Microsoft Powerpoint to be run in administrator mode and restart Adobe Captivate.
Thanks again.

Similar Messages

  • Soundbooth error when I try to record - WinFile.cpp-705

    We are using Soundbooth on a high school classroom computer. When we try to record from a microphone we get the following error message: ..\..\Src\Win\WinFile.ccp-705
    Does anyone know what is causing this error?
    The permission rights on school computers are fairly restricted.  Our school's Tech Department blames the problem on Quicktime. I think this is a permissions issue.
    I would appreciate help solving this problem.
    Thanks!

    Hi Mahesh --
    I have Adobe Captivate 6 and use Windows 7 Enterprise.  Below is a screen shot of the error.  Unfortunatley, it is in German, but it says  : Adobe Captivate can't be started.  Check to see if Adobe Captivate is configured to be run in adminstrator mode.  If so, configure Microsoft Powerpoint to be run in administrator mode and restart Adobe Captivate.
    Thanks again.

  • I always get this error when I try to install the Trial of 'Adobe CS6 Design and Web Premium'

    Exit Code: 15
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW051 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 8 error(s), 0 warning(s)
    ERROR: DW051: Dependency of session payload {1E621A15-CD9F-4543-B3F6-8032B3647A6A} Standard Adobe Flash CS6_AdobeFlash12.0-en_USLanguagePack 12.0 has changed.
    ERROR: DW051: Dependency of session payload {4482EF4A-376B-46DE-9B17-E377232328E0} CoreTech PDF Settings CS6 11.0 has changed.
    ERROR: DW051: Dependency of session payload {4FAB339E-2132-434F-9376-9CD735E4C69C} Standard Adobe Flash CS6 12.0 has changed.
    ERROR: DW051: Dependency of session payload {50F5A7C9-1E43-4860-AED8-7F8722691F17} CoreTech Adobe ExtendScript Toolkit CS6 3.8.0 has changed.
    ERROR: DW051: Dependency of session payload {83463106-DD1C-4FE5-A61C-DF6715472AD4} Creative Suites Adobe Extension Manager CS6 6.0 has changed.
    ERROR: DW051: Dependency of session payload {97BA0109-F6BE-4F50-8904-C19442D7216E} CoreTech Adobe Bridge CS6 5.0 has changed.
    ERROR: DW051: Dependency of session payload {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} Adobe Web Suite CS6 Adobe Media Encoder CS6 6 has changed.
    ERROR: DW051: Dependency of session payload {CFC3110A-491C-4DBF-A97D-66C567600A2F} Shared Technology Photoshop Camera Raw 7 7.0 has changed.
    Anyone who can help? I am using Mac OS 10.8.2 (Mountain Lion). Thanks.

    From the information available it appears that your install could be conflicting with a previous version or installation.  I would recommend reviewing your installation logs to verify the root cause of your difficulties.  You can find directions on how to review your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

    I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • HELP!!  I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!! Adobe Presenter

    HELP!!  I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!! 
    Adobe Presenter
    Adobe Presenter has encountered an unexpected problem while
    working with this presentation.  Try saving your work to a new file and
    restarting PowerPoint.  If the problem persists, consult the Help menu
    item, or contact support at http://www.adobe.com/support/presenter.

    Please provide your system specification. Also is it happening on a specific presentation or every presentation.
    Regards,
    Rajeev.

  • I have an error -5000 when I try to record in GarageBand..I urgen need help, I have an error -5000 when I try to record in GarageBand..I urgen need help

    I have an error -5000 when I try to record in GarageBand V10,02..I urgen need help, I have an error -5000 when I try to record in GarageBand..
    I just reinstal OSX 10,9,2 marveiks and downdload the GB.. but when I try to record, the error ocurr
    I urgen need help
    thanks

    This is probably one of the files that is required by the template you are using.
    These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
    You need to dig down through the folders and files to find what you want...
    Contents/Resources/da.lproj/Templates/
    If the file is missing you would need to re install the iWeb app...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • Getting error when I try to import images into my application

    I get this error when I try to import an Image file exported from my application on another PC, everythign else has moved over fine except the images:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-01003: no statement parsed <pre>begin wwv_flow.g_import_in_progress := true; end; </pre>
    Error installing image.
    Return to application.
    Please help.
    user5607453
    Edited by: user5607453 on Jun 23, 2009 12:50 PM

    I tried to use an external hard drive from my windows computer that was formatted in NTFS Windows format.  Mac Pro sees that hard drive as "read only".  Itunes works on existing media on the hard drive to play music or movies, but when you try to purchase from itunes store and download you get the above message.  You need to move your library to a library that is formatted in exFAT format (which can be used both by "windows" and mac computers. 

  • I get a runtime error when I try to open itunes, any help?

    I get a runtime error when I try to open itunes, any help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Error when trying to view Sample Applications

    I'm getting the following error when I try to access any of
    the Flex 2 sample applications on this site. I don't get any errors
    for the stuff I'm developing on my own servers. Any ideas?
    ReferenceError: Error #1069: Property hasDefinition not found
    on flash.system.ApplicationDomain and there is no default value.
    at mx.managers::SystemManager/getDefinitionByName()
    at mx.managers::SystemManager/
    http://www.adobe.com/2006/flex/mx/internal::addingChild()
    at mx.managers::SystemManager/
    http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
    at mx.managers::SystemChildrenList/addChild()
    at mx.managers::SystemManager/
    http://www.adobe.com/2006/flex/mx/internal::initialize()
    at mx.managers::SystemManager/::initHandler()

    I downloaded the latest Flash Player for Firefox and that did
    the trick. I can't do the same thing for IE because our security
    settings don't allow the ActiveX install and I haven't been able to
    find a regular downloadable version of the latest Flash Player for
    IE.

  • Keeps saying error when i try to open skype, a friend has a mac an theeirs still opens so im not sure there is a problem with skype

    Keeps saying error when i try to open skype, been happening for 2 days now. A friend has a mac and is able to access skype on theirs. What can i do?

    Open Finder and locate the following folder:
    HD > User > Library > Application Support > Skype
    Delete the file shared.xml.
    Restart Skype.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • "Error when reading ATP delta records"

    Hi,
    I have created Integration models for Location, Product, ATP Check, ATP Configuration, Stock and Sales Order.
    After creating IM's when I tried to run ATP on my Sales Order I'm getting  error " "Error when reading ATP delta records".
    Can anyone provide me why I'm facing this error.
    Thanks in Advance.
    Ram

    Dear Ram,
    For the product/locations you are checking, it appears that ATP objects in the liveCache are missing which normally are created automatically  when products and locations are created in APO.
    I would advise to recreate all needed products and locations.
    In APO, i.e. make again an initial data transfer of the master data from R/3. Previously the existing ones should be deleted to be sure that they will be created again. Then the problem should be solved. 
    If this does not help please check the the connection and LC settings to LDA and please try to restart the livecache. A potential explanation for the error would be an incorrectly maintained LDA connection to liveCache. Please check this by running transaction  /SAPAPO/OM13 and selecting the 'checks' section.                    
    The problem with the LDA connection could be e.g. very simple. If you check the table dbcon, which contains the description of the liveCache connections , if the liveCache names for LCA and LDA are different you should ensure, that the connections LCA and LDA are setup for the same liveCache (con_env in dbcon).                  
    I hope this helps.
    Regards,
    TIbor

  • Captivate 5 Freezes when I try to Record Audio To Slide

    Hello,
    I'm having difficulties with recording audio to slide in Captivate 5. Recording to slides, background, and object work, but when I try to record to slide, the computer appears to freeze (until I press escape and then I can select buttons again).
    I have Windows XP on my computer. I have deleted the preferences C:\Documents and Settings\name\Application Data\Adobe\Captivate, following advice on other threads, but this does not help.
    This issue just started yesterday. I was able to record to slide before.
    Any help would be appreciated!
    Thanks,
    Debbie

    Hi DebsterV,
    Did you try upgrading the system audio drivers as RodWard suggested?
    If even that does not resolve your issue, let me know so that we can have a connect session.
    Thanks,
    Vikranth.

  • Algebra CD keeps displaying "Script run-time error" when I try to open it

    I have a CD that came with my Algebra book (I bought it used) for Technical School and it keeps displaying Scrip run-time error when I try to open it.  I have updated Quick-time player, just in case that was the problem.

    b noir wrote:
    Is CoreGraphics.dll cited in the iTunes events?
    Also check for error events happening a few seconds prior to the iTunes events. Open those events. Do they all cite the same .ttf file? If so, what's the precise spelling of the .ttf (font) file?
    YES! There is a CoreGraphics.dll cited in the iTunes event. This is what exactly the window said
    "Faulting application iTunes.exe, version 9.0.3.15, faulting module CoreGraphics.dll, version 1.0.60.0, fault address 0x00266560."
    For the .ttf file, this is what it showed.
    "Windows cannot access the file C:\WINDOWS\Fonts\ARIALUNI.TTF for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program ARIALUNI.TTF because of this error.
    Program: ARIALUNI.TTF
    File: C:\WINDOWS\Fonts\ARIALUNI.TTF"
    I hope this will help. I still cant open iTunes.

  • Why does my imovie say error when I try to update it?

    I just bought a macbook pro, and I clicked update on the apps. The imovie app says error when I try to update it. What do I need to do to fix this?

    Please post the complete, verbatim text of any error messages you saw, and specify where you saw them: in an application window, a CrashReporter window, a log, or whatever.

  • I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

    I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

    "You can add the PATH enviromental variable in Control Panel> System> Advanced System Settings.
    Alternatively, I was successful just copying the QTMovieWin.dll from c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
    See in: https://discussions.apple.com/thread/5252205?start=15&tstart=0

Maybe you are looking for