Error when I update to ios 6 on ipod

Tried updating my iPod to ios 6 and it completed but didn't complete for some reason

Ok kook another question how do I take my credit card of my iPod touch on the billing info part there not a option when I try to change the method just all the types of cards

Similar Messages

  • When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    Hi Willy,
    Welcome to Apple Support Communities.
    The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
    Resolve iOS update and restore errors
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    I hope this helps,
    -Jason

  • HT4623 when i trying to update my iphone 5 to latest ios 7.04 always appeared error when the update almost done about 20 to 30 minutes

    when i trying to update my iphone 5 to latest ios 7.04 always appeared error when the update almost done about 20 to 30 minutes

    Hello micojen1920
    If you are having an issue with updating your iPhone, try it through a different method like in iTunes or through software update on your iPhone in settings. If that does not work then follow the steps in the article below to force a restore on your iPhone. Make sure to back up first and you can always restore from that back up once your iPhone is up to date. The second article will assist you with the back up and restore process.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iOS: How to back up and restore your content
    http://support.apple.com/kb/ht1766
    Regards,
    -Norm G.

  • TS1424 I updated latest ios on my ipod touch. Now when I go to the itunes store and browse for possible purchases it seems to shut off after only a short time for no reason. Help?

    I updated the ios on my ipod touch. Now when I browse the itunes store on my ipod, it only allows a very brief visit before automatically closing me out. I have to go back into the store and begin searches etc all over again. Is this a setting or a problem that is randomly occuring? I use to look for hours. Any thoughts?

    Maybe here:
    http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
    Is the iPod jailbroken?

  • When I updated to ios 6 my explicit songs became dubbed...

    When I updated to ios 6 my explicit songs became dubbed, did this happen to anyone else? How can I fix it? The songs still say they are explicit.... I do not have parental controls turned on...

    You have to first make sure you don't have an operator error - so check the camera roll after you have taken a picture.
    Little icon bottom left if you are in the camera app.
    If the photos show up there you are good.
    If not you can connect your iPad to iTunes and do a backup. Then factory reset it using iTunes and restore it from backup.

  • Error when activating update rule

    HI BI Expert,
    The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
    Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
    Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
    IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
    Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
    Thanks.

    Hi,
    When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
    Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
    If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
    Rgds,
    Vikram.
    Rgds,
    Vikram.

  • "Error when activating update rule" after changing ODS key

    Hi Gurus,
    I have problem when transporting in productive system an existing ODS & the update rule linked. The message is  :  "Error when activating update rule".
    This is when i move one field from the key to a simple field of the ODS.
    Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
    I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
    Please help.....

    Hello,
    Please try to check/perform the following steps:
    1- You must ensure for the update rule have mapping between infosources
       and ODS/CUBEs correct, this means that also these objects need
       to be of the same version in the source system of the transport as in
       target system.
    2- Please ensure all infoobjects in the cube are active.Please
       reactivate all the objects again in source system.
    3- Ensure all infoobjects are found in the communication structure.
    4- Please try to collect the update rule via BW transport connection
       with the grouping option "only necessary objects" and then transport
       those objects again.
    Could you please reactivate the infocube and its update rules again
    and then create a new transport for this infocube and transport it
    again.
    Best regards,
    Paula Csete

  • Error when activating update rule after transporting to QA

    Hi,
    When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
    1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
    IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
    2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
    IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
    and etc.
    Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
    The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
    Quick answers will be highly appreciated.
    Regards,
    Vijay

    Hi Vijay,
    Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
    Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
    Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
    Regards,
    Rohini

  • HT1386 When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software.

    When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.

    bubblesblom wrote:
    Okay, so my friends think it is funny to change the passcode on my iPhone.
    Maybe you should get new friends.
    I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
    If you can't update or restore your iOS device - Apple Support
    If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
    iCloud: Erase your device - Apple Support
    This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

  • Error when transpotring Update Rules

    Dear colleagues.
      When transporting an update Rules into our Quality enviroment the system pops up the following error:
    IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error:  rows 0.
    I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
    I would appreciate your feedback.
    Thanks in advance.

    Dear khaja.
      I send you the transport log as well as the Return Code.
    Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
    IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
    IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error:   rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0.  Message no. RSAU466)
    Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
    Please, let me know if you need anything else.
    Thanks.

  • Error when copying update rules!!!

    Hello All,
             I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
    Error when copying update rules
    Patch levels are
    SAP_BW  - 0014
    BI_CONT - 0005
    Please help me in solving this error.
    Regards,
      PNK

    Hi,
           The error message show as below. There is no longtext
    Error when copying update rules
    Message no. RSAU457
    But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
    Regards,
    PNK

  • When I updated to iOS 8.3 I lost all shared photo albums on my iPad Air. Other devises which I shared to still have access to photo albums but my iPad does not, therefore I can no longer add or delete to shared albums. I can create new shared albums.

    When I updated to iOS 8.3 I lost all shared photo albums on my iPad Air. Other devises which I shared to still have access to photo albums but my iPad does not, therefore I can no longer add or delete to shared albums. I can create new shared albums.

    Hello JimS19,
    I'm sorry to hear you are having these issues with your iPad. If you are having issues accessing your Shared Albums from your iPad (but not from your other devices), you may want to double-check your iCloud Photo Sharing configuration as outlined in the following articles, just to make sure it hasn't changed:
    iCloud Photo Sharing FAQ - Apple Support
    Get help using iCloud Photo Sharing and shared albums - Apple Support
    Sincerely,
    - Brenden

  • Will I lose my data when I update to ios 7?

    Will I lose my data when I update to ios 7 on my ipad2? If so, what data and what should I do?

    Nothing should be lost... However...
    It is both Prudent and Recommended to Backup Before any Update or Upgrade.
    How to BackUp
    http://support.apple.com/kb/ht1766
    What gets Backed Up
    iTunes http://support.apple.com/kb/ht4946
    iCloud http://support.apple.com/kb/PH2584
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have an iphone 5 ana i buy it unlocked and when i update the ios to 7.1 the iphone is locked .why?

    i have an iphone 5 ana i buy it unlocked and when i update the ios to 7.1 the iphone is locked .why?

    Probably because the previous owner had the phone hacked to unlock it, and when you updated it locked back to the original carrier.
    Only the carrier that the phone is locked to is authorized to unlock it.
    If the previous owner had the carrier unlock it, you wouldn't have any issues.

  • Error 1669 after updating to ios 7, Error 1669 after updating to ios 7

    Error 1669 after updating to ios 7, Error 1669 after updating to ios 7

    how to solve error 1669
    STEP 1: Delete iTunes from your computer. Also make sure you remove the cache(open itunes then press edit wich is located on the tool bar and then click on preferences and then go to advanced and click on reset warrnings and reset cache).
    then go to your hard disk and go to program files and delete folder named itunes.
    Note: If you have any libraries or locally cached data that you want to keep, temporarily store them somewhere until you get the situation fixed.
    STEP 2: Once it is completely deleted, download iTunes 11.1 from Apple servers.
    STEP 3: Download iTunes 11.1 from here.
    STEP 4: Now connect your iPhone, iPad or iPod touch to computer.
    STEP 5: Click “restore”, it should present you with a notification saying a new version is available.
    STEP 6: Simply Click download and install, and sit back and relax.
    The process should be completed and your error 1669 should be fixed.

Maybe you are looking for