Error when i upload TBH file
Hi,
I Need your help, when I am attempting to load TBH file, I am getting an error input contains special characters check the file, I am unable to identify the special character in the upload file, can you please help to trace the error?
I thought that the error is due to # inclusion, hence I removed the same tried with -, still it didnt go through.
Thanks in advance.
Gopal.
Hi,
The # must be a new line or a tab.
so you should actually scan and replace for CL_ABAP_CHAR_UTILITIES->New_line or CL_ABAP_CHAR_UTILITIES=>horizontal_tab
loop at itab into wa_itab.
replace all occurences of CL_ABAP_CHAR_UTILITIES->New_line in wa_itab-tdline with space.
if sy-subrc = 0.
conditions
endif.
Reference: GUI_UPLOAD
Reward if helpful.
Regards,
Ramya
Similar Messages
-
Error when performing uploading a file in a thread worker.
Could anyone give me some suggestions?
I am trying to get the ajax file upload to work in Netbeans Visual Web Pack.
I pass the Upload component in the start() method, and perform uploading in the run() method. I get the following errors:
WARNING: Cannot serialize session attribute SessionBean1 for session CDF8F6EF75EF4DBC930C977303C8C472
java.io.NotSerializableException: java.lang.Thread
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1156)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1509)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1474)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
at java.util.HashMap.writeObject(HashMap.java:1000)
at sun.reflect.GeneratedMethodAccessor245.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:945)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1461)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1509)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1474)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
at org.apache.catalina.session.StandardSession.writeObject(StandardSession.java:1462)
at org.apache.catalina.session.StandardSession.writeObjectData(StandardSession.java:938)
at org.apache.catalina.session.StandardManager.doUnload(StandardManager.java:516)
at org.apache.catalina.session.StandardManager.unload(StandardManager.java:462)
at org.apache.catalina.session.StandardManager.stop(StandardManager.java:666)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4345)
at org.apache.catalina.core.StandardContext.reload(StandardContext.java:2984)
at org.apache.catalina.manager.ManagerServlet.reload(ManagerServlet.java:906)
at org.apache.catalina.manager.ManagerServlet.doGet(ManagerServlet.java:353)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:174)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)Sorry this isn't a concurrency problem and I know nothing of Ajax or Netbeans.
As the exception states, you are trying to serialize a Thread object and Thread is not a Serializable class. -
Error when trying uploading .pfx file
Hi
I have a problem with the configuring the .pfx file. I go to the Document Service Configuration and click on Browse for P12 File and get an I get the following error "com.adobe.service.sap.Configuration.ConfigurationException: An error occured while indexing the credential files"
What do I do to resolve this issue
Regards
Naziem MahomedHello Marius,
Did you check if the fdirectory below are avaliable on your system:
Copy the credential file (<filename>.pfx) to the /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/ TrustManagerService/trust/credentials directory.
If not then you should create them yourself.
I hope it helps.
Kind regards,
Maarten. -
Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced
Hi Friends,
I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
Anyone have idea to solve this issue please kindly help me.
ThanksYou are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant -
FM GUI_UPLOAD gives PC036 "Error when opening the download file".
Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
JordiHello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.
-
I have an error when i uploding my file pdf.
why i can`t convert my pdf to word when i uploading my file put error but really i dont know what i have to do!!!!!1
help me please 55mb is my pdfI'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.
-
Images of gallery doesn't load when I upload the files on server
The gallery works fine when the files is on my computer but when I upload the files on my server the images doesn't load.
I'm using xml file to load the images. Here is the code of the gallery:
function loadPlayList(url:String) {
delete myMO.onMouseWheel;
delete myKO.onKeyDown;
for (var i in infostruc) {
root["_ref"+i] = root["_bmd"+i]=false;
loadedAll = false;
infostruc = [];
for (var i in root) {
if ((root[i]._name.substr(0, 3) == "art" || root[i]._name.substr(0, 10) == "reflection") && (parseInt(root[i]._name.split("art")[1]) || parseInt(root[i]._name.split("reflection")[1]))) {
root[i].swapDepths(root.getNextHighestDepth());
root[i].removeMovieClip();
current = 1;
root.createEmptyMovieClip("loader", root.getNextHighestDepth());
xmlData.load(url);
function init(Void):Void {
myMO = {};
myKO = {};
Mouse.addListener(myMO);
Key.addListener(myKO);
for (var i in infostruc) {
loader.clear();
loader.gradient_mc.removeMovieClip();
loader.attachMovie("default", "art", 1);
root["_shelveCDWidth"+i] = shelveCDWidth;
root["_shelveCDHeight"+i] = shelveCDHeight;
root["_frontCDWidth"+i] = frontCDWidth;
root["_frontCDHeight"+i] = frontCDHeight;
this["_bmd"+i] = new BitmapData(loader._width, loader._height);
this["_ref"+i] = new BitmapData(loader._width, loader._height);
this["_bmd"+i].draw(loader);
var mc:MovieClip = loader.createEmptyMovieClip("gradient_mc", loader.getNextHighestDepth());
matrix = new Matrix();
matrix.createGradientBox(loader._width, loader._height, reflectionRotation/180*Math.PI, 0, 0);
mc.beginGradientFill(reflectionFillType, reflectionColors, reflectionAlphas, reflectionRatios, matrix, reflectionSpreadMethod, reflectionInterpolationMethod, reflectionFocalPointRatio);
mc.moveTo(0, 0);
mc.lineTo(0, loader._height);
mc.lineTo(loader._width, loader._height);
mc.lineTo(loader._width, 0);
mc.lineTo(0, 0);
mc.endFill();
loader.art._alpha = reflectionAlpha;
loader.beginFill(reflectionBackgroundColour);
loader.moveTo(0, 0);
loader.lineTo(0, loader._height);
loader.lineTo(loader._width, loader._height);
loader.lineTo(loader._width, 0);
loader.lineTo(0, 0);
loader.endFill();
this["_ref"+i].draw(loader);
for (var i:Number = count=0; count<stageWidth-(centerDistance*3); count += shelveCDSpacing, i++) {
var cArt:MovieClip = this.createEmptyMovieClip("art"+this.getNextHighestDepth(), this.getNextHighestDepth());
var rArt:MovieClip = this.createEmptyMovieClip("reflection"+(this.getNextHighestDepth()-1), this.getNextHighestDepth());
rArt.id = cArt.id=rArt.cid=cArt.cid=Number(i)+1;
rArt._x = cArt._x=stageWidth;
cArt.DistortImage(this["_bmd"+cArt.id]);
controlTheObject(cArt);
rArt.DistortImage(this["_ref"+cArt.id]);
controlTheObject(rArt);
var tmpFilter:BlurFilter = new BlurFilter(reflectionBlurX, reflectionBlurY, reflectionQuality);
rArt.filterArray = cArt.filterArray=[];
rArt.filterArray[0] = tmpFilter;
rArt.filters = rArt.filterArray;
tmask = mask.duplicateMovieClip("_mask"+cArt.id, this.getNextHighestDepth(), {_x:mask._x, _y:mask._y});
rmask = mask.duplicateMovieClip("_rmask"+cArt.id, this.getNextHighestDepth(), {_x:mask._x, _y:mask._y});
cArt.setMask(tmask);
rArt.setMask(rmask);
rArt._visible = cArt._visible=false;
myMO.onMouseWheel = function(delta:Number):Void {
if (delta>0) {
next();
} else if (delta<=0) {
previous();
myKO.onKeyDown = function():Void {
if (Selection.getFocus() != "_level0.goto") {
if (Key.isDown(Key.RIGHT)) {
next();
} else if (Key.isDown(Key.LEFT)) {
previous();
scrollBar.scroller.onPress = function():Void {
dist = this._parent._xmouse-this._x;
this.onMouseMove = function():Void {
tmp = 1+Math.ceil(((this._parent._xmouse-dist)-scrollBarStart)/(scrollBar._width-scrollBarStop)*(infostruc.length-1));
if (tmp>infostruc.length) {
tmp = infostruc.length;
if (tmp<1) {
tmp = 1;
current = tmp;
updateInfo();
scrollBar.scroller.onRelease = scrollBar.scroller.onReleaseOutside=function ():Void {
stopDrag();
delete this.onMouseMove;
scrollBar.left.onPress = function():Void {
previous();
shifter = setInterval(previous, scrollerDelay);
scrollBar.right.onPress = function():Void {
next();
shifter = setInterval(next, scrollerDelay);
scrollBar.onMouseUp = function():Void {
clearInterval(shifter);
scrollBar.onMouseDown = function():Void {
if (this.hitTest(_xmouse, _ymouse, true) && !this.left.hitTest(_xmouse, _ymouse, true) && !this.right.hitTest(_xmouse, _ymouse, true)) {
if (this._xmouse<this.scroller._x) {
previous();
shifter = setInterval(previous, clickDelay);
if (this._xmouse>this.scroller._x+this.scroller._width) {
next();
shifter = setInterval(next, clickDelay);
goto.restrict = "0-9";
goto.onKillFocus = function():Void {
if (!isNaN(Number(this.text)+1)) {
if (this.text>infostruc.length) {
this.text = infostruc.length;
if (this.text<1) {
this.text = 1;
current = Number(this.text);
} else {
this.text = current;
updateInfo();
fscreen.onPress = function():Void {
fscommand("fullscreen", !(this._currentframe-1));
this.gotoAndStop(!(this._currentframe-1)+1);
slideShow.onPress = function():Void {
if (this._currentframe == 1) {
sliderShow = setInterval(function ():Void {
if (current<infostruc.length) {
next();
} else if (slideshowLooping) {
current = 0;
next();
}, slideshowSpeed);
} else {
clearInterval(sliderShow);
this.gotoAndStop(!(this._currentframe-1)+1);
distance = Number(i);
mask.removeMovieClip();
fscreen.swapDepths(1102);
slideShow.swapDepths(1103);
scrollBar.swapDepths(1101);
i2.swapDepths(1105);
i1.swapDepths(1106);
loader.removeMovieClip();
loadNext();
updateInfo();
function concat(m1, m2):Object {
var mat:Object = {};
mat.a = m1.c*m2.b;
mat.b = m1.d*m2.b;
mat.c = m1.a*m2.c;
mat.d = m1.b*m2.c;
mat.tx = m1.a*m2.tx+m1.c*m2.ty+m1.tx;
mat.ty = m1.b*m2.tx+m1.d*m2.ty+m1.ty;
return mat;
function updateInfo():Void {
goto.text = current;
info = infostruc[current-1].info;
author = infostruc[current-1].auth;
album = infostruc[current-1].album;
displayAlternArt(root["_bmd"+(current-1)], artDisplay._width, artDisplay._height);
scrollBar.scroller._x = scrollBarStart+((current-1)/(infostruc.length-1)*(scrollBar._width-scrollBarStop));
function brightness(_prop:String, _old:Number, _new:Number, target:MovieClip):Void {
var brightness_array:Array = [1, 0, 0, 0, _new, 0, 1, 0, 0, _new, 0, 0, 1, 0, _new, 0, 0, 0, 1, 0];
target.filterArray[1] = new ColorMatrixFilter(brightness_array);
target.filters = target.filterArray;
function controlTheObject(mc):Void {
if (mc._name.indexOf("reflection") == -1) {
mc.onPress = function():Void {
if ((getTimer()-this.pressTime<=doubleClickRegister && this.pressTime) || !doubleClickURL) {
if (infostruc[this.cid].urlToGet) {
getURL(infostruc[this.cid].urlToGet, "_"+infostruc[this.cid].urlAction);
this.pressTime = getTimer();
current = this.cid+1;
updateInfo();
mc.watch("_brightness", brightness, mc);
mc.onEnterFrame = function():Void {
this._visible = true;
if (infostruc[this.cid].loaded && !this.loadedImage) {
this.allowUpdate = true;
this.DistortImage(this._name.indexOf("reflection")>-1 ? this._parent["_ref"+this.cid] : this._parent["_bmd"+this.cid]);
this.setTransform(this.px1, this.py1, this.px2, this.py2, this.px3, this.py3, this.px4, this.py4);
this.loadedImage = true;
if (Math.round(Math.abs(this._x-this.x))>=1 || this.allowUpdate) {
if (this._name.indexOf("reflection") == -1) {
this._y = centerY+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2));
if (this._x>=centerX+centerDistance) {
this.swapDepths(-this._x);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, this._parent["_shelveCDHeight"+this.cid]/2, -(this._parent["_shelveCDWidth"+this.cid]/2), (this._parent["_shelveCDHeight"+this.cid]/2)-((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else if (this._x<=centerX-centerDistance) {
this.swapDepths(this._x);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2)+(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), this._parent["_shelveCDWidth"+this.cid]/2, (this._parent["_shelveCDHeight"+this.cid]/2)-(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), -(this._parent["_shelveCDWidth"+this.cid]/2), this._parent["_shelveCDHeight"+this.cid]/2);
} else if (this.cid == current-1 || this.cid == current || this.cid == current-2) {
if (this._x>centerX-centerDistance && Math.floor(this._x)<centerX && angle-((this._x-(centerX-centerDistance))/centerDistance*angle)>autoJump) {
this.swapDepths(1002);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-((this._x-(centerX-centerDistance))/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this.setSides(-(sum/2), -(sum3/2), sum/2, -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, (sum3/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(sum/2), sum3/2);
} else if (this._x<centerX+centerDistance && Math.ceil(this._x)>centerX && angle-(((centerX+centerDistance)-this._x)/centerDistance*angle)>autoJump) {
this.swapDepths(1003);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-(((centerX+centerDistance)-this._x)/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this.setSides(-(sum/2), -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, -(sum3/2), sum/2, sum3/2, -(sum/2), (sum3/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else {
this.swapDepths(1004);
this.setSides(-(this._parent["_frontCDWidth"+this.cid]/2), -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, this._parent["_frontCDHeight"+this.cid]/2, -(this._parent["_frontCDWidth"+this.cid]/2), this._parent["_frontCDHeight"+this.cid]/2);
} else {
if (this._x>centerX-centerDistance && Math.floor(this._x)<centerX && angle-((this._x-(centerX-centerDistance))/centerDistance*angle)>autoJump) {
this.swapDepths(1002);
var sum2:Number = angle-((this._x-(centerX-centerDistance))/centerDistance*angle);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), this._parent["_shelveCDWidth"+this.cid]/2, (this._parent["_shelveCDHeight"+this.cid]/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(this._parent["_shelveCDWidth"+this.cid]/2), this._parent["_shelveCDHeight"+this.cid]/2);
} else if (this._x<centerX+centerDistance && Math.ceil(this._x)>centerX && angle-(((centerX+centerDistance)-this._x)/centerDistance*angle)>autoJump) {
this.swapDepths(1003);
var sum2:Number = angle-(((centerX+centerDistance)-this._x)/centerDistance*angle);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), this._parent["_shelveCDWidth"+this.cid]/2, -(this._parent["_shelveCDHeight"+this.cid]/2), this._parent["_shelveCDWidth"+this.cid]/2, this._parent["_shelveCDHeight"+this.cid]/2, -(this._parent["_shelveCDWidth"+this.cid]/2), (this._parent["_shelveCDHeight"+this.cid]/2)-((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else {
this._yscale = -100;
this._y = centerY+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+this._parent["_shelveCDHeight"+this.cid]+reflectionSpace;
if (this._x>=centerX+centerDistance) {
this.swapDepths(-this._x-333);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2)+(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], -(this._parent["_shelveCDHeight"+this.cid]/2), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], this._parent["_shelveCDHeight"+this.cid]/2, -(this._parent["_shelveCDWidth"+this.cid]/2), (this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
} else if (this._x<=centerX-centerDistance) {
this.swapDepths(this._x-333);
this.setSides(-(this._parent["_shelveCDWidth"+this.cid]/2), -(this._parent["_shelveCDHeight"+this.cid]/2), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], -(this._parent["_shelveCDHeight"+this.cid]/2)+((Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(this._parent["_shelveCDWidth"+this.cid]/2)+this._parent["_shelveCDWidth"+this.cid], (this._parent["_shelveCDHeight"+this.cid]/2)+(Math.sin(angle*Math.PI/180)*this._parent["_frontCDWidth"+this.cid]), -(this._parent["_shelveCDWidth"+this.cid]/2), this._parent["_shelveCDHeight"+this.cid]/2);
} else if (this.cid == current-1 || this.cid == current || this.cid == current-2) {
if (this._x>centerX-centerDistance && this._x<centerX && !validateOk(this)) {
this.swapDepths(999);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-((this._x-(centerX-centerDistance))/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+((this._x-(centerX-centerDistance))/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this._y = centerY+sum3+reflectionSpace;
this.setSides(-(sum/2), -(sum3/2), sum/2, -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, (sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), -(sum/2), sum3/2);
} else if (this._x<centerX+centerDistance && this._x>centerX && !validateOk(this)) {
this.swapDepths(998);
var sum:Number = this._parent["_shelveCDWidth"+this.cid]+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDWidth"+this.cid]-this._parent["_shelveCDWidth"+this.cid]));
var sum2:Number = angle-(((centerX+centerDistance)-this._x)/centerDistance*angle);
var sum3:Number = this._parent["_shelveCDHeight"+this.cid]+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+(((centerX+centerDistance)-this._x)/centerDistance*(this._parent["_frontCDHeight"+this.cid]-this._parent["_shelveCDHeight"+this.cid]));
this.setSides(-(sum/2), -(sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])), sum/2, -(sum3/2), sum/2, sum3/2, -(sum/2), (sum3/2)+((Math.sin(sum2*Math.PI/180)*this._parent["_frontCDWidth"+this.cid])));
this._y = centerY+sum3+reflectionSpace;
} else if (!validateOk(this)) {
this.swapDepths(995);
this._y = centerY+((shelveCDHeight/2)-(this._parent["_shelveCDHeight"+this.cid]/2))+this._parent["_frontCDHeight"+this.cid]+reflectionSpace;
this.setSides(-(this._parent["_frontCDWidth"+this.cid]/2), -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, -(this._parent["_frontCDHeight"+this.cid]/2), this._parent["_frontCDWidth"+this.cid]/2, this._parent["_frontCDHeight"+this.cid]/2, -(this._parent["_frontCDWidth"+this.cid]/2), this._parent["_frontCDHeight"+this.cid]/2);
this.allowUpdate = false;
this._x -= Math.min(Math.max((this._x-this.x)/albumEase, -maxSlide), maxSlide);
this.setTransform(this.px1, this.py1, this.px2, this.py2, this.px3, this.py3, this.px4, this.py4);
if (this._x<deleteMinDistance && this._parent["_ref"+(this.cid+distance)]) {
this.cid += distance;
this._x = deleteMaxDistance;
controlTheObject(this);
this._visible = false;
this.loadedImage = infostruc[this.cid].loaded;
this.DistortImage(this._name.indexOf("reflection")>-1 ? this._parent["_ref"+this.cid] : this._parent["_bmd"+this.cid]);
if (this._x>deleteMaxDistance && this._parent["_ref"+(this.cid-distance)]) {
this.cid -= distance;
this._x = deleteMinDistance;
controlTheObject(this);
this._visible = false;
this.loadedImage = infostruc[this.cid].loaded;
this.DistortImage(this._name.indexOf("reflection")>-1 ? this._parent["_ref"+this.cid] : this._parent["_bmd"+this.cid]);
} else if (Math.ceil(Math.abs(this._x-this.x)) == 0) {
this._x = this.x;
if (this.cid+1>current) {
this.x = (centerX+((this.cid+1-current)*shelveCDSpacing))+centerDistance;
} else if (this.cid+1<current) {
this.x = (centerX+((this.cid+1-current)*shelveCDSpacing))-centerDistance;
} else {
this.x = centerX+((this.cid+1-current)*shelveCDSpacing);
if (fadeType == "brightness") {
if (this._x<fadePointMin+fadeDist) {
this._brightness = -(250-((this._x-fadePointMin)/fadeDist*250));
} else if (this._x>fadePointMax-fadeDist) {
this._brightness = -(250-((fadePointMax-this._x)/fadeDist*250));
} else {
this._brightness = 0;
} else if (fadeType == "alpha") {
if (this._x<fadePointMin+fadeDist) {
this._alpha = ((this._x-fadePointMin)/fadeDist*100);
} else if (this._x>fadePointMax-fadeDist) {
this._alpha = ((fadePointMax-this._x)/fadeDist*100);
} else {
this._alpha = 100;
function next():Void {
if (current<infostruc.length) {
current += 1;
updateInfo();
function previous():Void {
if (current>1) {
current -= 1;
updateInfo();
function displayAlternArt(art, width:Number, height:Number):Void {
artDisplay.attachBitmap(art, 1);
artDisplay._width = width;
artDisplay._height = height;
function loadNext():Void {
if (!loadedAll) {
var num:Number = current-1;
if (infostruc[current-1].loaded) {
var num:Number = current-Math.floor(distance/2)-1>=0 ? current-Math.floor(distance/2)-1 : 0;
while (infostruc[num].loaded && num<infostruc.length) {
num++;
if (num>=infostruc.length) {
var num:Number = current-1;
while (infostruc[num].loaded && num>0) {
num--;
if (num<=0) {
loadedAll = true;
var newLoad:MovieClip = this.createEmptyMovieClip("artLoad"+num, this.getNextHighestDepth());
newLoad.createEmptyMovieClip("art", newLoad.getNextHighestDepth());
newLoad._alpha = 0;
var mc:Object = {};
mc.number = num;
var artLoader:MovieClipLoader = new MovieClipLoader();
artLoader.addListener(mc);
artLoader.loadClip(infostruc[num].httpType+infostruc[num].art, newLoad.art);
mc.onLoadError = function() {
infostruc[this.number].loaded = true;
loadNext();
mc.onLoadInit = function(target:MovieClip) {
tw = target._width;
ty = target._height;
if (_CDProportions == "auto") {
if (target._width>target._height) {
target._width = Math.min(frontCDWidth, target._width);
target._yscale = target._xscale;
} else {
target._height = Math.min(frontCDHeight, target._height);
target._xscale = target._yscale;
root["_frontCDWidth"+this.number] = Math.min(frontCDWidth, target._width);
root["_frontCDHeight"+this.number] = Math.min(frontCDHeight, target._height);
target._width = tw;
target._height = ty;
root["_bmd"+this.number] = new BitmapData(target._width, target._height);
root["_ref"+this.number] = new BitmapData(target._width, target._height);
root["_bmd"+this.number].draw(target);
var mc:MovieClip = target._parent.createEmptyMovieClip("gradient_mc", target._parent.getNextHighestDepth());
matrix = new Matrix();
matrix.createGradientBox(target._width, target._height, reflectionRotation/180*Math.PI, 0, 0);
mc.beginGradientFill(reflectionFillType, reflectionColors, reflectionAlphas, reflectionRatios, matrix, reflectionSpreadMethod, reflectionInterpolationMethod, reflectionFocalPointRatio);
mc.moveTo(0, 0);
mc.lineTo(0, target._height);
mc.lineTo(target._width, target._height);
mc.lineTo(target._width, 0);
mc.lineTo(0, 0);
mc.endFill();
target._parent.beginFill(reflectionBackgroundColour);
target._parent.moveTo(0, 0);
target._parent.lineTo(0, target._height);
target._parent.lineTo(target._width, target._height);
target._parent.lineTo(target._width, 0);
target._parent.lineTo(0, 0);
target._parent.endFill();
target._alpha = reflectionAlpha;
root["_ref"+this.number].draw(target._parent);
infostruc[this.number].loaded = true;
if (_CDProportions == "auto") {
if (target._width>target._height) {
target._width = Math.min(shelveCDWidth, target._width);
target._yscale = target._xscale;
} else {
target._height = Math.min(shelveCDHeight, target._height);
target._xscale = target._yscale;
root["_shelveCDWidth"+this.number] = Math.min(shelveCDWidth, target._width);
root["_shelveCDHeight"+this.number] = Math.min(shelveCDHeight, target._height);
target._parent.removeMovieClip();
updateInfo();
loadNext();
xmlData.onLoad = function(success:Boolean):Void {
if (success) {
for (var i:Number = -1; this.childNodes[0].childNodes[++i]; ) {
var cNode:XMLNode = this.childNodes[0].childNodes[i].childNodes;
var val1:String = cNode[1].childNodes[0].nodeValue ? unescape(cNode[1].childNodes[0].nodeValue) : unknownSong;
var val2:String = cNode[2].childNodes[0].nodeValue ? unescape(cNode[2].childNodes[0].nodeValue) : unknownArtist;
var val3:String = cNode[3].childNodes[0].nodeValue ? unescape(cNode[3].childNodes[0].nodeValue) : unknownAlbum;
var val4:String = cNode[4].childNodes[0].nodeValue ? unescape(cNode[4].childNodes[0].nodeValue) : "./";
var val5:String = cNode[5].childNodes[0].nodeValue ? unescape(cNode[5].childNodes[0].nodeValue) : undefined;
var val6:String = cNode[6].childNodes[0].nodeValue ? unescape(cNode[6].childNodes[0].nodeValue) : undefined;
infostruc.push({art:cNode[0].childNodes[0].nodeValue, info:val1, auth:val2, album:val3, httpType:val4, urlToGet:val5, urlAction:val6, loaded:false});
root["_frontCDWidth"+i] = frontCDWidth;
root["_frontCDHeight"+i] = frontCDHeight;
root["_shelveCDWidth"+i] = shelveCDWidth;
root["_shelveCDHeight"+i] = shelveCDHeight;
init();
loadStat = "";
} else {
loadStat = "There was an error loading that data, sorry.";
xmlData.ignoreWhite = true;
loadPlayList("./albuminfo9.xml");
loader._visible = false;
mask._alpha = 0;
scrollBar.scroller._y = 0;This won't work on most servers: "./albuminfo9.xml". It should be "../albuminfo9.xml". That may or may not solve the problem. Be sure that all of your files and folders are in the same relative location on the server as they are on your computer. Also be sure that the case for each referenced item is correct. Upper and lower case are sometimes more important on a server than they are on your computer. JPG is not the same as jpg. Be sure that your files are uploading correctly.
-
Error when opening table container file keydb read only
Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
SantoshFurther info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM -
i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod
"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks. -
Errors when writing metadata to files on Windows Server
Good day!
I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
It looks to me like a timing related issue.
Any ideas?
(After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
Any ideas?
YuvalI Yuval
I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
Do you have solution to this? Or are you stuck as I am?
Cheers, Chris -
Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)
We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
Any help would be appreciated.
Thanks!
Rich OliverHi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue. I think it might be a timing issue with how lightroom interact with a slower write delay using network shares. I suggest you also chime into this thread: Lightroom 5 can't write metadata to DNG files I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.
-
When i upload the files thorugh internet jvm memory is taking so much.
i have integrated a file upload in my webapplication(JSP)
when i upload the files thorugh internet jvm memory is taking so much.
how can i reduce it.
any open source for file upload process is there?
thax,
R. Ramasubramaniam.Suggestion: read [the documentation|http://commons.apache.org/fileupload/using.html] for it.
By default it will store files in memory up to about 10k. Larger than that will be written to disk.
If you are really worried about memory, perhaps you should take a look at the [streaming API|http://commons.apache.org/fileupload/streaming.html]
How large are the files being uploaded?
How many users are we talking about? -
I get an error when I try downloading files - 8520 Curve
I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster
Hello !
Could you please be more elaborative for explaining your issue? -
Error when trying to recover files
I'm getting a "No Backup servers found" error when trying to recover files from my Azure backup vault. Any ideas folks?
Hi,
Please login to Azure Portal and check if you are able to see other servers from which you have backed up data, in the Portal.
Also, prerequisites for recovering file and folder data to a different server are:
· The target server is registered with the same Backup Vault the source server was backed up to.
· You have the passphrase used to encrypt the data from the source server.
Regards,
Manu Rekhar -
I receive the below error when imprting an .eex file .... please help
I receive the below error when imprting an .eex file .... please help
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Folder with identifier 'XXWFS_FA_ASSETS_V'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'ASSET_NUMBER'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DATE_PLACED_IN_SERVICE'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DEPRECIATION_AMT'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DEPRECIATION_METHOD'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'DESCRIPTION'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'LIFE_IN_MONTHS'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'ORIGINAL_COST'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'PERIOD_NAME'
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Item with identifier 'YTD_DEPERIATION_AMT'
Import completed, but with warnings. Please check the result.
File(s) imported partially :
C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eexHi,
You don't say what components you are trying to import into the EUL. But it could be that you are importing a business area which has security access granted to a user that is not defined on the target system. It could also be that the user you are using to do the import does not have admin access to all the components you are importing.
Rod West
Maybe you are looking for
-
Error Message: Sorry, a serious error has occurred that...
This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem. Software- Premiere Pro (Version 5.03) Recently updated OS- WIN7 Core 2 Duo CPU
-
I have a pop up message on my IPad that says it has not backed up in two weeks and now my ipad is locked and I cannot use it. I connected it to electricity, it is already on Wifi, and locked it with the button on top. But the message has not gone a
-
Why does a BPM Process fail at the Start Activity?
Hello All, We're currently working on a Dev environement (WLS 10.3), where we're experiencing issues with BPM Processes that fail at the start node. The error observed is a "Null Pointer Exception" despite there definteily being parameters passed int
-
Hello all, Is it possible to create a matrix object with collapsible rows like on the standard form "User-Defined Fields - Management"? I have found that the Grid has a similar functionality, but it is not exactly the same, because in the Grid each l
-
i only have 500 photos in my camera roll but when I connect my iPhone 6 to iTunes it says that i have over 3000 items for the photo category. i originally had around 2000 when I first noticed the issue but since then I have deleted many photos and vi