Error When I use BDC in my BSP Application

Hi,
I am creating a BSP application to create scheduling Aggrement, as BAPI is not suiting my req I am using BDC. This BDC is used with in a method of my application class. If I give all the data properly, I don't have any problem, it displays the output fine, but whenever some error occurs it immediatly terminates the BSP application, it does not give any option to handle the error.
Anyone can help me to solve this problem?
Regards,
Sathish

check these threads
Re: BDC in BSP
CNTR_ERROR While calling BDC from BSP
Regards
Raja

Similar Messages

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Am getting error error when am using wm_concat funcation.

hi all
am getting error error when am using wm_concat funcation.
SQL> DECLARE
2 ex VARCHAR2(200);
3 BEGIN
4 SELECT wm_concat(ename) INTO EX FROM EMP WHERE deptno=30;
5 DBMS_OUTPUT.PUT_LINE(EX);
6 END;
7
8 .
SQL>
SQL> /
DECLARE
ERROR at line 1:
ORA-06550: line 4, column 10:
PL/SQL: ORA-00904: "WM_CONCAT": invalid identifier
ORA-06550: line 4, column 3:
PL/SQL: SQL Statement ignoredThanks for all in advance
Edited by: maddy on 9 Jan, 2012 10:02 PM

>
WM_CONCAT is undocumented and unsupported by Oracle, meaning it should not be used in production systems.
>
so change your way
btw
for me
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> set serveroutput on
SQL> DECLARE
2   ex varchar2(200);
3   BEGIN
4   SELECT wm_concat(ename) INTO EX FROM EMP WHERE deptno=30;
5   DBMS_OUTPUT.PUT_LINE(EX);
6   END;
7 /
ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
PL/SQL procedure successfully completed.
SQL> try wmsys.wm_concat

Getting bad host error when trying to deploy simple web sample application

hi,
Can someone tell me why I'm getting this error when trying to deploy the simple web application from samples
This is what it said:
deploy_common:
[echo] Deploying ../assemble/war/webapps-simple.war.
[exec] java.net.MalformedURLException: Bad host: station_1
thanks

Hi,
Another update on this issue.
To remove the error that we were getting (java.lang.LinkageError: Class javax/xml/transform/Source violates loader constraints), we tried some searching around and found out that the way to fix it is to provide correct versions of xalan.jar, xml-apis.jar and xercesImpl.jar. We downloaded the required version from the apache site and added it to our WEB-INF/lib folder in the WAR file.
Now, we are getting this error:
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model: http://java.sun.com/jaxp/xpath/dom
What else we might be missing in our libs or do we need to check some other configurations?
Any help on this would be much appreciated.
Thanks,
Gaurav

Sharepoint-Hosted App giving FORBIDDEN error when i use REST Api

Hi,
I have created a sharepoint hosted app which will create Team site on button click.
I used REST Api and NAPA Tool to develop this app.
Napa tool gives to things ClientWebpart.aspx and Default.aspx.
When i run my Default.aspx code is working fine but ClientWebpart.aspx is giving FORBIDDEN error when i am trying to create site.
Below is the code which i used to create site
code:
var hostweburl;
var appweburl;
$(document).ready(function () {
hostweburl= decodeURIComponent(getQueryStringParameter("SPHostUrl"));
appweburl = decodeURIComponent(getQueryStringParameter("SPAppWebUrl"));
function createSPWeb() {
$.ajax(
url: appweburl +
"/_api/SP.AppContextSite(@target)/web/webinfos/add?@target='" +
hostweburl + "'",
type: "POST",
data: JSON.stringify(
'parameters':
'__metadata': { 'type': 'SP.WebInfoCreationInformation' },
'Url': 'RestSubWeb',
'Title': 'RestSubWeb',
'Description': 'REST created web',
'Language': 1033,
'WebTemplate': 'sts#0',
'UseUniquePermissions': false
headers: {
"accept": "application/json;odata=verbose",
"content-type": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
success: successHandler,
error: errorHandler
NOTE:This is on sharepoint online.
Please help
Regards,
sudeep

So in the app you are testing, are you using the FQDN or the NetBIOS name? Bad practice but could you test with both (hard code the absolute URL for testing purposes) then retest your app?
If you are making a web part based on the new app model this will be an "app part" and probably have the same issues you are experiencing. If this is for something internal rather than a product you are developing to resell then the script editor /
content editor web part approach could work for you.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Help!!!!!these is error when i use tcode mr21!!

dear all:
i have a problem when i use tcode mr21.
i want to change the material's price by tcode mr21,when i pree save
then the system stop and tell me 'material cc001d000780 have actual or intending standard price'.
what should i chech for this error?
i need help !
thank you a lot !
best regards!

Hello Zhao,
If want to trying to change the material price through MR21 TCode the system will give the error or warning message which has been set in the Customizing.This you can Change and control throgh customizing through T code OKZZ.In this activity you have to give that whether the message as a Error or Information or a warning messgae.
I thope your problem has been clear with this.Plz assign points.
Thanx,
Edu

Error : when i use transform

The problem is still coming after doing an update to Oracle9i 9.2.0.2.0
When i use transform method, It logs me out. if i do same transform using xmlspy it works.
html := srcXml.transform(xslFile);
return html.getclobval();
where
srcXml : select extract(value(x), xPath) into srcXml from tbl_main_xml x;
xslFile : select xsldoc into xslFile from tbl_xsl
where filename = xslFileName;
How to open a tar to submit my xml and xsl files.
Regards
Error which is coming :
SQL> select gethtml from dual;
ERROR:
ORA-03113: end-of-file on communication channel
no rows selected

Hi Mark
I have opened a tar and submitted my xml and xsl files.
TAR 2903047.995
Can you pls have a look.
Regards

CL_RSRD_PRODUCER_PRECALC Error when Printing using Info Broadcasting

Hi,
I get the following error when trying to print from the Portal using Information Broadcasting - CL_RSRD_PRODUCER_PRECALC, type PROD. I am trying to print using PS or PCL not PDF.
We are running SPS12. The printer is setup in BW and tested. All other connections between Portal and BW appear to be working.
Any ideas?
Thanks,

Thanks, but that note applies to Patch 8 and as mentioned we are running SPS12.
Basically what happens is we get a blank browser window for some time then the error returns as mentioned in my original post.

Getting errors when iam using bapi ' BAPI_PO_CREATE1'

Hi Sap Gurus,
I need small info over bapi BAPI_PO_CREATE1.
While creating Purchase orders using BAPI_PO_CREATE1 it is not allowing me to enter partner function details .I am getting below errors.
i.e
1) it is not allowing to update partner function details.and iam not getting what excact bapi structure for partner function details.here i found 'BAPIEKKOP' in tables option.but these fields are not matching with ME21N screen partner function fields . I want to update PARTNER FUNTCION, PARTNER NAME, DEFALT PARTNER.in bapi structure BAPIEKKOP there is no DEFAULT PARTNER instead of this there is DELETION INDICATOR.
Pls let me know the exact bapi structure and fields in BAPI.
2). I am getting the below error when iam posting the Pur.Order
i.e Item 10 Acct Assgt 1
Account 460600 does not exist in chart of accounts CANO.
what does it means? Evenif that Account is existed in chart of account CANO and Even i posted that PO, it showing like above.and iam getting all field in PO like CO area,COST center and G/L account for Account Assingment group 'K' .
I could not understand why it is giving such type of errors.
Pls let me know the anwsers for above errors .
thanks in advance.

Hi Sap Gurus,
I need small info over bapi BAPI_PO_CREATE1.
While creating Purchase orders using BAPI_PO_CREATE1 it is not allowing me to enter partner function details .I am getting below errors.
i.e
1) it is not allowing to update partner function details.and iam not getting what excact bapi structure for partner function details.here i found 'BAPIEKKOP' in tables option.but these fields are not matching with ME21N screen partner function fields . I want to update PARTNER FUNTCION, PARTNER NAME, DEFALT PARTNER.in bapi structure BAPIEKKOP there is no DEFAULT PARTNER instead of this there is DELETION INDICATOR.
Pls let me know the exact bapi structure and fields in BAPI.
2). I am getting the below error when iam posting the Pur.Order
i.e Item 10 Acct Assgt 1
Account 460600 does not exist in chart of accounts CANO.
what does it means? Evenif that Account is existed in chart of account CANO and Even i posted that PO, it showing like above.and iam getting all field in PO like CO area,COST center and G/L account for Account Assingment group 'K' .
I could not understand why it is giving such type of errors.
Pls let me know the anwsers for above errors .
thanks in advance.

Error when transporting using CMS

Hi,
Please ssist.
We are on PI 7.0 SP17. We want to transport using CMS from Dev box to Prod system. We get to export steps. Select Mode, able to go pass, Then Select Objects We select them and Click on Finish(at bottom of pop-up screen). "correct mark"Then We get Transport Using CMS. Trnsport request generated and released for transport using CMS, Shoose Tools-> System Messages to display result. Then after a few minutes the screen pops a long message.
"Sent on 11/18/09 at 10:39 AM: CMS (server: http://server:port) cannot export the following transport lists:
Export list (send time = 11/18/09 10:39 AM, component = Default Software Component, ID = e10bf190d41d11dead8f00096bdd826a)
Details: com.sap.aii.util.misc.api.BaseRuntimeException: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line -1, column -1. Details:
Message: Generic Exception:
Stacktrace: com.sap.engine.lib.xml.parser.NestedSAXParserException: Generic Exception: -> com.sap.aii.util.misc.api.BaseRuntimeException: Parsing generic data instance: begin of unexpected element "html"!"
Regards
Scharlotte

Check if it is a password-related issu as mentioned here: Error when defining Xi-track in CMS
Regards,
Abhishek.

ORA 2005 error when you using ODBC driver of 10.2.0.3

I am getting following error when connecting Oracle 10.2.0.3 to Oracle 11.1 database from a thrid part application:
Issue Description. An application using Oracle ODBC driver version 10.2.0.3 to communicate with the Oracle database 11g tries to update the field “SOURCE_CODE” of LONG data type in table “SUBROUTINE” returns the following error.
ORA-02005: Implict -1 length not valid for the bind or dfeine datatype.
I updated my client to 10.2.0.4,, error is still present. Does any one know what patch to install to get rid of this error. I cannot modify the third party code.

What are the system requirements (supported config) of 3rd party app?
According to the 9.2 Error Messages document,
>
ORA-02005 implicit (-1) length not valid for this bind or define datatype
Cause: A negative length for the define variable was passed to a define function.
Action: An explicit, non-negative, length parameter must be passed.
>
Perhaps you should report this back to vendor as a bug.
You could also turn on odbc tracing (driver/dsn config) to catch the cuplrit statement.

TS3297 Error when I use search function in itunes store and select an artist

When I use search function in itunes store and select an artist I get this message. Microsoft visual C++ run time library. Prog C:\progfiles\itunes\itunes.exe R6025 - Pure virtual function call . It then shuts down itunes and cannot provide a solution.
Have tried reinstalling itunes but it did not help. Any other ideas?

I have yet to find a solution, but as a work around, do not click or select any of the suggested results while you are typing in your search. Type in your search, and press enter.

Error When I use BDC in my BSP Application

Similar Messages

Maybe you are looking for