Error when implementing Multi mapping

Hi all,
I am carrying out a scenario which invloves multi mapping. I have read both the interfaces in Interface mapping and I have chose extended interface determination. But the message is not getting processed successfully. I get an error in SXMB_MONI saying "NO_RECEIVER_FOUND". Could you plz help me regarding this?
Thank you
Indudhar

you have to define a Receiver Determination for the Sender & Interface and specify the Receiver there. Furthermore, you will need an Interface Determination to determine the interface of the outgoing message and the mapping
Finally you will require a Receiver Agreement .
http://help.sap.com/saphelp_nw04/helpdata/en/19/8dba88b1db634f891622e909565f7a/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Similar Messages

Error when deploying a map

hello i have the following error when deploying a map in a local database, the mapping is a simple transfert of data between two table,
ORA-06550: line 0, column 0:
ORA-04052: erreurs lors de la consultation de l'objet distant [email protected]@KCDBDEV
ORA-00604: une erreur s'est produite au niveau SQL récursif 1
ORA-01882: région de fuseau horaire introuvable
ORA-02063: pré
any help please
thanks,
tarek

Hello thank u for helping, i have exactly the same problème in Error executing a query using a DB-Link
but i am not inderstanding the solution, i found the same probleme in metalink, and the solution posted is:
1. Create an errorstack of the ORA-1882 to see the ALTER SESSION SET TIME_ZONE statement that is causing the ORA-1882 during deployment. To create this errorstack, follow step 1 to 4 below:
1. Just before you reproduce the error, open a SQL*Plus session with user SYSTEM.
SQL> alter system set events '1882 trace name ERRORSTACK level 3'
2. Deploy the mapping to reproduce the ORA-1882
3. Disable the system event
SQL> alter system set events '1882 trace name errorstack off';
4. Take a look at the errorstack (located in the udump directory). Suppose the following statement is in there:
ALTER SESSION SET TIME_ZONE = 'GMT+02:00'
2. Modify the run_service.sh(.bat) file as follow:
* For UNIX:
Modify owb_server_home/owb/bin/unix/run_service.sh as follows:
Add the parameter -Duser.timezone="+02:00" to the line where java is started (last line of run_service.sh)
$JAVAPATH/bin/java -Xmx768M -Djava.awt.headless=true -DORACLE_HOME.....
e.g:
$JAVAPATH/bin/java -Xmx768M -Duser.timezone="+02:00" -Djava.awt.headless=true -DORACLE_HOME
* For Windows:`
Modify owb_server_home\owb\bin\win32\run_service.bat as follows:
Add the parameter -Duser.timezone="+02:00" to the line where java is started
%JAVAPATH%\jre\bin\javaw.exe %JVM_OPTIONS%
e.g.:
%JAVAPATH%\jre\bin\javaw.exe -Duser.timezone="+02:00" %JVM_OPTIONS%
3. Save the file and re-start the Runtime Service using stop_service.sql/start_service.sql.
but in creating the errorstack of the ORA-1882 i not found the ALTER SESSION SET TIME_ZONE
and i Modify the run_service i fixed -Duser.timezone="+01:00" cause the time zone here is Europe/Paris but there is no changes.
the db link is from Oracle 10.2.0.2.0 to 9.2.0.1.0. and owb 10g R2
other solution?
thanks,
tarek

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Graphics tab in REBDBU: Internal error when implementing extension

Hello,
Seek your kind help please.
I have entered in the building master data using REBDBE. We have a tab called Graphics. The pictures etc of the building are uploaded using a software called Korasoft. When i am clicking on the Graphics tab, it is entering the screen but immediately afterwards flashing the following message, "Internal error when implementing extension".
Doing a F1 on the error message shows the foll details:
"Diagnosis
An internal error occurred during the implementation of a customer-specific enhancement. A CHANGE-API module was called with an object reference (parameter IO_OBJECT) that was not instantiated in the required activity for changing (02). The API modules are function modules and begin with API_RE_.
Procedure
Within the BAdI implementation, transfer the parameter IO_OBJECT from the BAdI method directly to the API module. Make sure that the transferred instance is allowed to be changed."
I found that the SAP note 1139014 causes this error message to be generated. Note 1139014 forms a part of support pack level 13 (release 600). Recently we have upgraded our systems from support pack level 8 to support pack level 13. Naturally even this note got implemented at that time.
But now this note is causing this error message and so I will be grateful if someone can please tell me how to rectify the error.
Regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Feb 11, 2009 5:30 PM

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Internal error when implementing extension

Hello everyone
At the moment I create a new contract (transaction RECN) an error occurs and I can not solve.
Someone could help me?
Internal error when implementing extension (see long text)
Message no. RECAAP093
Diagnosis
Call of GET_EXTENSION( ) method for enhancement CL_FILACI_VICN01_EXTENSION failed.
It tried to use an add-on or customer-specific enhancement that is not implemented in your system.
To be able to determine the technical attributes of enhancement CL_FILACI_VICN01_EXTENSION, the RECA_STORABLE_EXT Business Add-In has to supply the desired information. However, this was not the case. In an implementation of RECA_STORABLE_EXT, the GET_OBJNAME_EXT( ) method must supply the required enhancement CL_FILACI_VICN01_EXTENSION.
Below is example code for GET_OBJNAME_EXT( ):
CASE ID_OBJNAME_STD.
WHEN '...'.
APPEND 'CL_FILACI_VICN01_EXTENSION' TO CT_OBJNAME_EXT.
ENDCASE.
For more information, refer to the documentation for the RECA_STORABLE_EXT Business Add-In.
Start BAdI Builder
Procedure
Contact your system administrator.
tks a lot!

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022     Source = SI_file_split_out
u2022     Target = SI_file_split_in
u2022     Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022     Source system to BPM using interface SI_File_Abs_source
u2022     BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022     from source system to BPM
u2022     Sender interface: SI_File_Split_Out
u2022     Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022     Commu. Component: Source System
u2022     Using interface: SI_File_Abs_source
u2022     Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022     Sender Communication Component: BPM
u2022     Receiver Communication Component: Target System
u2022     Receiver Interface: SI_File_Split_In
u2022     Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
      Message1
           MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

" Path not found() "error when implementing single sign on

Hi,
We are implementing single sign on so that when users click on the "Reports Login" he is navigated to the obiee presentation services screen. For the reports login we have a .asp page which directs to the presentation services.
I have done the necessary changes in the instanceconfig and credentialstore xml files.
I have been receiving a strange error when I click on the reports login. I get the error
Path not found ()
Error Details
Error Codes: U9KP7Q94
I have checked the presentation server log file and I see the below error
Type: Error
Severity: 45
Time: Tue Mar 09 09:18:44 2010
File: project/websubsystems/ssportal.cpp Line: 1907
Properties: ThreadID-2672;HttpCommand-Dashboard;Proxy-;RemoteIP-127.0.0.1;User-;Impersonator-
Location:
     saw.subsystem.portal
     saw.httpserver.request
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
Path not found ()
Can anyone provide me an input how to resolve this issue?
This is bit urgent for me.
Thanks

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

Error when deploying a mapping to Staging in OWB 11gr2

Hi,
I recieve the following error when I try to deploy a simple Source to Stage mapping:
RPE-01012: Cannot deploy PL/SQL maps to this target schema. The target schema must be in the same instance as the Control Center and have the OWB_USER role granted.
I have spent few hours researching it, but have not yet found a solution.
My environment:
DB 11gr2 on Red Hat Linux. (OWB Server is on linux and the same machine as its Repository and the 11gr2 db).
Source is on an Oracle 10.2 DB server in Texas;
Target (Staging env) is in California, also on Oracle 10.2.
I can validate the mapping and the Staging table was deployed sucessfully to the Staging DB.
Do I need to create a repository and workspace on the Target DB (Oracle 10.2) using Repository Assistant? (If that's the case, then would one also need to create OWBSYS?)
Please help.

This is an urgent request. Would appreciate it if someone could point out what I may be doing wrong.
To summarize, my target DB is on Oracle 10.2 in a remote location, so I ran the 3 scripts that OWB Install documents require: Section: Configuring OWB Installed as a Standalone Instance.
Cat_web.sql, reset_owbcc_home.sql, and remote_owb_install.sql.
But, when I run the Repository assistant, I get the error above (asking me to install compatible OWB version.)
Here are the detailed steps:
1. Ran clean_owbsys.sql
2. Ran cat_owb.sql (Against USERS Tablespace)
3. reset_owbcc_home.sql (?? Ora home for Target???)
4. Ran remote_owb_install.sql (??Ora Home for Target???) -- I have tried different combinations, but no difference.
For Repository Assistant, here are the detailed steps:
1. Provide connect info for the remote db (host:Port:Service)
2. Selected "Managed Warehouse Build Workspaces"
3. Selected "Create a new Warehouse Builder Workspace"
4. Select "Create a workspace with an existing user as workspace owner" (Since we have user already defined for this role. Should I create a new one??)
5. Entered Workspace Owner's User Name, Password and created WKS1 as the Workspace.
6. Entered System / and Password to logon
7. Provided Owbsys user id and Password and clicked on Next
8. As soon as I hit Next on the OWBSYS Information screen, I get the error:
"OWB software with the compatible version must be installed locally on the database server machine". If it is installed, acquire the DBA user credentials,
and run the remote_owb_install.sql script on the Oracle Database server machine..."
(I have tried with different paths for the reset_owbcc_home and remote_owb_install scripts)

RTC-5161 Error when deploying a MAP

Hello,
I recently upgraded OWB 11.1.0.7 to 11.2.0.3 and within the Design Center, I receive error RTC-5161 when deploying a MAPPING. My process flows and all other objects deploy successfully but the MAPPING pops up the RTC-5161 error
Here is how I went about my upgrade, can anyone tell me if I am missing something?
-Installed OWB 11.2.0.3 on a new server, configured Workspaces, workflow workspace user
-Exported an OWB 11.1.0.7 project MDL and imported into the 11.2.0.3 and the Design Center automatically UPGRADED my project.
-Registered all locations
-Revalidated all locations within the ROPOSITORY BROWSER(the statuses were previously showing UNKNOWN, now they are all valid)
I need help PLEASE, if anyone could point me to something I am overlooking....
AGAIN, ONLY the MAPPING will not deploy, but the Process Flows generates and deploys with no issues.
I tried running the DEPLOYMENT of the Project from the command line(OMBPLUS), here is the error generated:
Processing module LOCATIONS ...
Deploying module name: FFL_DL_BMFENT_FFM_BMFENT
module name is FFL_DL_BMFENT_FFM_BMFENT
Deploying module name: DBL_EFDS_DL_BMFENT_DBM_TGT_EFD
module name is DBL_EFDS_DL_BMFENT_DBM_TGT_EFD
Deploying ... CONNECTOR : DBL_EFDS_DL_BMFENT_DBM_TGT_EFD/CONN_FFL_DL_BMFENT_FFM_BMFENT
Error deploy drop action plan for DBL_EFDS_DL_BMFENT_DBM_TGT_EFD/CONN_FFL_DL_BMFENT_FFM_BMFENT, err msg= "OMB05602: An error occurred during deployment: DeploymentContextImpl.generate WBGeneratedObject[] is null or length 0 for CONN_FFL_DL_BMFENT_FFM_BMFENT"
Error deploy LOCATIONS : CONNECTOR

Fixing this actually entailed going through the repository browser and checking the first optional feature during the configuration of the workspaces etc
thanks for all your help!
Now I have another issue with synchronization:
I noticed that doing an inbound synching of my staging table using replace option and by object name, the preview window that pops up shows my objects to be updated not matching one to one.
Has anyone ran into something like this?
The synchronization preview shows source to target columns NOT MATCHING one to one.....

Internal error when deploying a mapping

Helllo,
I am getting an ORA-00600 internal error when I deploy a mapping using the following case statement (case statement executes fine in SQLplus):
CASE WHEN (LINE_CANCEL_FLAG ='Y' OR PO_CANCEL_FLAG = 'Y')
THEN ('Y')
ELSE ('N')
END
If I comment out the "OR" section it deploys without errors:
CASE WHEN (LINE_CANCEL_FLAG ='Y' )
--OR PO_CANCEL_FLAG = 'Y')
THEN ('Y')
ELSE ('N')
END
What am I doing wrong?
(Oracle 9i Warehouse Builder Client 9.2.0.4.0
Oracle 9i Warehouse Builder Repository 9.2.0.2.0
Platform for Application Server: Windows 2003
Platform for database: HP Unix (Risc Processor) V11i)
Thanks

Hello again,
Please observe that I asked whether you pressed the Validate button in EXPRESSION BUILDER (the window that appears every time you click on the ellipsis ... in the property editor for every SQL or PL/SQL expression property), not whether you validated the mapping (as a whole). These are separate things.
The mapping can be validated OK with expression syntax errors, but the mapping PL/SQL code cannot be compiled / deployed.
Regards, Hans Henrik

Error when implementing CUA

Hi,
I wanted to implement a test of CUA with my DEV systems (DEV R3, DEV BW, and DEV SRM). When i've created the model distribution in my central system (DEV R3 client 030), and saved the model, i had the following error in my child system (DEV SRM) : "ERROR when starting the text comparison". I didn't have any error in the other systems (DEV R3 and DEV BW).
I've checked my RFC connections, I don't know how to sove this problem.
Thanks in advance for your aswers...
Regards,
Mohamed

OK, I've solved the problem by myself.
In fact, I didn't have an RFC user connection between my child system DEV SRM and my central system DEV R3. I had just RFC users connection between my central system and my child systems...
Mohamed

How to catch thrown error when implementing HttpSessionBindingListener?

I would like to write code to implement the class HttpSessionBindingListener for using the valueBound and valueUnBound method.
As I have put some codes for inserting data in database when the valueBound method is invoked, I would like to catch the SQLException error when insertion fails. However, when i try the following:
public class SessionTracker implements HttpSessionBindingListener
throws Exception{
Compilation error like the following appears:
Class SessionTracker should be declared abstract; it does not define method valueUnbound(javax.servlet.http.HttpSessionBindingEvent) in interface javax.servlet.http.HttpSessionBindingListener
My question is: How can I throw caught error?
Thanks for replying!

May be i should clarify a little bit?
My question is: What error would the implemented method throw?

MMM 1064 Error when adding pluggable mapping

OWB ver 11.2.0.1
9802120 patch has been applied, but not exactly which "version"
Created a standalone pluggable mapping. It is pretty basic: Source table -> Filter ->Aggregator -> Subquery Filter -> Output Signature.
When I attempt to add the pluggable mapping to an existing mapping (either by dragging the PM from the Projects Navigator, or going through the Component Palette), I get the following error:
MMM 1064: Value 98F36D...E390EC not valid in domain IN_MATCHING_ATTRIBUTE
Any ideas on how to fix this?

Sorry for the delay, but another fire sprang up.
I created a pluggable mapping consisting of a table and filter and was able to drop it onto another mapping (I didn't go further and try and connect it). Went back to the pluggable mapping, deleted the lines from the filter to the output signature, and added the aggregate and sub-query filter. I get the error when the revised pluggable mapping is dropped onto another mapping.
For grins, I got rid of the sub-query (it was an IN type), and did what I wanted "old-school" - brought in a second instance of the table, and joined it to the aggregation. I was able to add this version to a mapping.
Client hasn't applied the 11.2.0.2 patch, so I am guessing it is something fixed in the patch.

ODBC Error when implementing BI Apps on SQL Server

Hey,
we are implementing BI Apps using SQL Server as the warehouse database, and we are running into the following errors when viewing the out-of-the-box reports:
[ODBC SQL Server Driver][SQL Server]'concat' is not a recognized built-in function name
[ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'NULLS'..
It appears that the standard reports are using Oracle-specific SQL functions that are not available in SQL Server. Yet BI Apps is supposedly certified with SQL Server.
Have anyone else run into this issue? If so, how did you get around it?
Thanks,
Yi

Ah, sorry, I misunderstood.
Yes, the CONCAT_SUPPORT feature is checked for both value and default. However, CONCAT_NULL_RETURNS_NULL is not checked. Should I check it?
It's great to know that you have it working on SQL server. I must be missing some configuration then.
Thanks,
Yi

Unicode error when implementing a BADI

Hi All,
I get a Unicode error when trying to implement either one of these two BADIs: ME_GUI_PO_CUST, ME_PROCESS_PO_CUST:
In Unicode programs, the "-" character cannot appear in names, as it does here in the name "MMCNT_EKKO-BEDAT".
There are two more similar errors. They all refer to the type group MMCNT, which is an SAP delievered object and is active. Has anyone ever encountered these errors?
Thanks!
Roman D.

Hi,
You did not mention which version of SAP you're using, but I just thought that the OSS Note 829031 might be relevant for you.
Regards,
Anand Mandalika.

Error when implementing Multi mapping

Similar Messages

Maybe you are looking for