Error when importing a Transport request in CHARM???

Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
Anand

HI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand

Similar Messages

Error while importing a transport request

Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.

Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh

Error during import of Transport Request in PI 7.1

Hi Friends,
I have installed PI 7.1 server on HP-UX 11.23 with Oracle 10g.
After completing all the post-installation activities,I configured CTS for moving objects developed by PI consultant to Quality & Production server.
Using CTS I Successfully imported all objects in Integration Repository but When Iam trying import objects of Integration directory,it is showing the error during deployment phase.
Copy File Between Transport Groups 23.10.2008 13:04:07 (0) Successfully Completed
Import 23.10.2008 13:04:26 (0) Successfully Completed
Check Versions 23.10.2008 13:04:26 (0) Successfully Completed
Deployment 23.10.2008 13:04:28 (12) Canceled
When I go to Log of above it displays follow
Deployment
Transport request : SPDK900031
System : SPT
tp path : tp
Version and release: 375.30.40 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://srstlspt:50000
Double-stack system SPT
Deploy for XID
Deploy File = 60913470a0d511dd873000306eeac205
Communication error in Web service CTSDEPLOY , exception is CX_AI_SYSTEM_FAULT
SoapFaultCode:1 Authentication failed. For details see log entry 00306EEAC205004E0000091A00000EC703
>>>51C766E6CBB4F0 in security log.
Return Code = 12
Highest Return Code = 12
Deployment
End date and time : 20081023151500
Ended with return code: ===> 12 <===
Regards,
Sunil

hi,
I am looking forward to implement SAPKW70017, I need to know the CONS of SP17, what was the reason which made you implement SP17, just to have updated Version of SP or did you face with any problems and decided to update the SP? what was the previous SP which you had,
We have problems in F4 search help when running queries, SAP asked us to implement latest which is SP17, but wanted to make sure what would be the CONS before we do it, we are having SP15 in BI 7.0
Please update the post for this.

Error when creating a transport request

I have developed a process with GP and now I want to export it by creating a transport request. When I choose my process in the gallery, I get the following messages:
Process "House Connection Request" refers to deprecated version of Callable Object "CO_InputRequest"; deprecated versions cannot be exported
Process "House Connection Request" refers to deprecated version of Action "Input House Connection Request"; deprecated versions cannot be exported
Both the action and its CO exist, but I don't understand why they are deprecated as they are activated and working.
So I deleted them from the process and created them new, but I still get the same error message from above.
Any help is greatly appreciated.
Regards,
Aydin

Hi Experts,
we are currently facing the same issue, that some Guided Procedures processes can not be added to transports, always throwing the same error messages:
Process "xxx" refers to depricated version of Callable Object "zzz"; deprecated versions cannot be exported
Can someone tell us if this is a technical issue or has object xxx been created/modified in the wrong way?
Any help is greatly appreciated.
Thank you very much.
Kind regards,
Jan

Error when importing the request

Hi All,
I have collected few queries in to one request and imported the request in to quality client and iam getting below mentioned error
Execution of programs after import (XPRA)
Transport request : NBDK900366
System : NBP
tp path : tp
Version and release: 372.04.08 700
Post-import methods for change/transport request: NBDK900366
Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20100406151003
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4HBCVLNBZJBOCJ2A2NP4Y0XEM
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import methods of change/transport request NBDK900366 completed
 Start of subsequent processing ... 20100406151003
 End of subsequent processing... 20100406151018
Execute reports for change/transport request: NBDK900366
Reports for change/transport request NBDK900366 have been executed
 Start of................ 20100406151018
 End of.................. 20100406151018
Execution of programs after import (XPRA)
End date and time : 20100406151018
Ended with return code: ===> 8 <===
Kindly let me know how to correct the error.
Regards

Hi,
As you have collected more than one queries in a single request,first identify the query which is giving problem.For this you can go to se11 and diasplay table RSRREPDIR,go to output list of the table and under ID field give the hexa decimal Id that you got in the error log.The table will display the query associated with this.
In the target system check whether your query changes are reflecting or not.
Make sure that you have collected all the necessary elements ,that is variables ,resricted KFs etc.You can check this via RSA1 Transport connections.
Thanks
Sreeja

Transport Error when Importing appset in target system

We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
 Start of subsequent processing ... 20110519104427
 End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
 Start of................ 20110519104506
 End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

Transport Error when Importing TR to QA system

Hi All,
We are receiving the below error when transporting a TR to Quality system.
Detail Error message:
Execution of programs after import (XPRA)
Transport request : XXXXXX
System : XXX
tp path : tp
Version and release: 372.04.88 701
Post-import methods for change/transport request: XXXXX
 on the application server: XXXXXX
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
Post-processing taking place in client 500
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet MJN in Client 500 for RFC After Import
Error in remote call of destination After Import
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
Post-import methods of change/transport request XXXXXXXcompleted
 Start of subsequent processing ... 20120210151806
 End of subsequent processing... 20120210151806
Execute reports for change/transport request: DB1K903324
 on the application server: mbixq2cs01
Reports for change/transport request XXXXXXXX have been executed
 Start of................ 20120210151806
 End of.................. 20120210151806
Execution of programs after import (XPRA)
End date and time : 20120210151806
Ended with return code: ===> 8 <===
Can any one have faced this kind of issue while transporting TR? Request to share your tought?
Regards , Trine
Edited by: trine_h on Feb 10, 2012 4:46 PM

Hi,
Thanks Rich for the help. But I did not find any dump log in ST22.
Here with I am attaching details TR log with Message number, it may give some clue. Sorry I am attaching long messages. I know very difficult for people to got through all the message. Sorry for that.
Log File: /usr/sap/trans/log/DB1R903324.QB2
000001
TP 199
1
000002
TP 162
1
Execution of programs after import (XPRA)
000003
TP 101
1
Transport request : XXXXXXXXXX
000004
TP 102
1
System : QB2
000005
TP 108
1
tp path : tp
000006
TP 109
1
Version and release: 372.04.88 701
000007
TP 198
1
000008
PU 126
2
Post-import methods for change/transport request: DB1K903324
000009
PU 111
4
on the application server: mbixq2cs01
000010
PU 122
2
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
000011
PU 186
2
Post-processing taking place in client 500
000012
R7 501
2 E
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
000013
UJT_EXCEPTION 047
4
Start After Import for AppSet XXX in Client 500 for RFC After Import
000014
RSPC 051
3 E
Error in remote call of destination After Import
000015
R7 501
2
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
000016
UJT_EXCEPTION 043
4
Nothing to delete.
000017
PU 133
2 E
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
000018
PU 135
3
RS_AFTER_IMPORT belongs to package RS
000019
PU 136
2 E
The errors affect the following components:
000020
PU 137
2 E
BW-WHM (Warehouse Management)
000021
PU 123
3
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
000022
PU 127
2
Post-import methods of change/transport request DB1K903324 completed
000023
PU 128
2
Start of subsequent processing ... 20120210151806
000024
PU 129
2
End of subsequent processing... 20120210151806
000025
PU 110
2
Execute reports for change/transport request: XXXXXXXXXXX
000026
PU 111
4
on the application server: mbixq2cs01
000027
TP 000
3
000028
TP 000
3
000029
TP 000
3
000030
PU 117
2
Reports for change/transport request XXXXXXXXXX have been executed
000031
PU 118
2
Start of................ 20120210151806
000032
PU 119
2
End of.................. 20120210151806
000033
TP 162
1
Execution of programs after import (XPRA)
000034
TP 110
1
End date and time : 20120210151806
000035
TP 111
1 E
Ended with return code: ===> 8 <===
000036
TP 199
1
Regards, Trine

What checkbox "import again" when adding an transport request to import que

Hello
I wander what checkbox "import again" when adding an transport request to import queue means?
Thank you in advance

Hello Jan,
Well you should have searched in help.sap.com before posting here for basic concepts. Anyways, import again means after successful import also you can reimport that particular request.. Please see the below link for other options as well.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/content.htm
Thanks,
Siva Kumar

Error in transporting request through charms

Dear Experts ,
recently refreshed my quality systems data with production data ..and finished successfully, but we did not take any screenshots before doing refresh in quality
my problem is we already configured charms in solution manager to transport requests to production system ...
now we are not able to transport request through charms .. because rfc connections are changed in quality ...
please let me how can i recollect quality rfc connections for charms ...
i dont have idea about charms configuration to reconfigure in quality.... please help in this
Regards

Hi,
You need to transport the ODS 1st and then the transformation.
The main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
          u2022The Infobjects should be transported first in a separate request.
          u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
           u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
hope this helps.
Regards,
Mahesh

Error when import BI content 3.5.3

Hi All
I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
The error occur in step 3/5 after enter SAINT:Passw request.
System shown information "Queue SAPKLTHQ10 has not yet been confirmed".
In step 4/5 sytem shown statue/remarks "The Add-on installation terminated during phase PROLOGUE".
I think about installation THAI font package at Tcode "SMLT" uncompleted.
I run report "RSCPINST" at Tcode "SE38" for editing codepage after that the system shown error message "MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010" Please see sap note 563975.
Note: When i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
Message no. TL137
Diagnosis
You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
System response
The system established that the language environment cannot be switched to language Thai.
The language transport is stopped at this point.
Procedure
The switch of the language environment may fail for the following reasons:
1. The database codepage is not up-to-date.
2. The codepage information for language Thai is not up-to-date.
3. Locales for language Thai do not exist, or are invalid, at the operating system level.
4. The profile parameter zcsa/installed_languages has to be adjusted.
If an error occurs, proceed as follows:
1. Find out the name of the server on which the language import job ran. Log on to this server.
2. Check the language configuration using report RSCPINST. Solve the reported problem there.
If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
plaese help me to solve this problem.
thank a lot for all solutions.
Mooping.

This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it.

Import of transport request

Hi All,
When i imported my transport request from development to maintenance system. It ended with errors.
It is showing error code 8 in the log.
The objects under the TR are not imported.
What could be the reason for the this.
Points will be rewarded
Thanks.
Ramya

some objects might be in Inactive stage.
Else, some Dependent objects might be missing.
Eg: You have transported table but missed the Data elements in that table.
Hope this helps.
Regards
Vinayak

Steps needed to import the transport request

Hello SAP gurus
I am trying to import a transport request consisting of a packacge into a server. I was able to create this transport request on first server and trying to import it into second server.
I read many postings on this site and played with STMS_IMPORT, STMS etc.,
But still can't see the package on the second server.
I don't know what I need to do on the second server (target) to make it accept this foreign transport request.
If some one can please point me to a link or document that gives the exact steps involved to do this, I would appreciate it a lot.
Thanks
Ram

thanks sudhi
but i couldn't find the area allocated for basis related questions.
when i goto forums, i see only the following
Business Process Expert Application Server Community User Groups
Service-Oriented Architecture (SOA) ABAP Development Integration and Certification Center (ICC)
SAP Solutions Emerging Technologies Chinese: 中文论坛 / 中文論壇
SAP Business One Scripting Languages Japanese: 日本語フォーラム
SAP NetWeaver Business Objects Korean: 한국어 포럼
Database & OS Platforms Business Objects SDK Application Development Portuguese: Português
Portal Crystal Reports, Xcelsius and Interactive Analysis Spanish: Español
Business Intelligence University Alliances Business By Design
Industries Community Discussions
Any other suggestions will be highly appreciated.
Tks
Ram

TP error while adding the Transport Request.

HI,
My server crashed. Restored the backup. In STMS, I am not able to import old Transport Request. While importing throw the below error.
Command: ADDTOBUFFER DEVK900103 DEV U1 pf=
DEVELOPMENT\sap
Return code: 0247
Error text: addtobuffer has problems with data- and/or cofile
Request: DEVK900103

Please check at os Level that the cofile and the Data file Exist with proper permission.
Perforn Tp check once.
Can you try to import the TP from OS level by using the following commands.
first check wheather the cofile and data files are created in directory /usr/sap/trans/cofiles and in /usr/sap/trans/data.
if they exists you go to directory /usr/sap/trans/bin and then execute the following commands.
tp addtobuffer <Request number> <SID>
Thanks Rishi Abrol

CHaRM-Handling old transport request before CHARM was activated.

Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.

Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar

XPRA_EXECUTION error when importing BI Content 7.02

Hi,
i have a problem in the SAINT Queue during the import of S.P. "BI-Cont 7.02" on Netweaver 2004s.
This the Status Log:
The installation was stopped, since an error occurred during the phase XPRA_EXECUTION, which tha Add-On Installation Tool is unable to resolve without your input.
After you have corrected the cause of the error, continue with the import by choosing Continue in que queue display.
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return Code: 0008
- Error message: OCS Package SAPKIBIHIZ, tp step R, return code 0008
Notes on phase XPRA_EXECUTION
The XPRAs and after-import methods are executed in this phase. This phase can terminate due to the following reasons:
- TP_STEP_FAILURE: The system was unable to perform the XPRA_EXECUTION tp step. To see the cause of the error in the method execution log, choose Goto -> Log -> Queue.
Log file:
Execution of programs after import (XPRA)
Transport request : SAPKIBIHIZ
System : SRM
tp path : tp
Version and release: 340.15.28 700
Post-import methods for change/transport request: SAPKIBIHIZ
Start of the after-import method RS_DTPD_AFTER_IMPORT for object type(s) DTPD (Delivery Mode)
Generate D versions from DTP_0MSP7J8547WONZUUPY5APU07R (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_26HXT42SO9GE35213TB8ZO787 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_2TTK3PKPY8MRXJLTL2DAL4QS6 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_3XGBSP4WF7ZB7MWP9EWI8PNNK (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_40ZWD11GPWF22G2384YXR1HG6 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_5N9KW314IL6OXVUOWTLV3NVDJ (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_6EYQ0Z5CJO4EZUHT4NZW9WLG7 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_74J50JAZ7DBGWMYD4UOELTOD3 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_AEV2KERLQF1JFFY4G5O0355EE (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_C6UJ41HN6DGM4JT1HDZI7NS7Q (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_C983IGD063LH2U3DPW5ZPGN12 (R/3700 -> BWCLNT001)
The user terminated processing of objects
Generate D versions from DTP_EK46M6ODNEHFHYJV35ZZGISNQ (R/3700 -> BWCLNT001)
The user terminated processing of objects
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Changes cannot be made, display user only
Start of the after-import method RS_DANP_AFTER_IMPORT for object type(s) DANP (Delivery Mode)
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSFO L
RS_AFTER_IMPORT_D belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT_D completed for DSFO L, date and time: 20060125140529
Execute reports for change/transport request: SAPKIBIHIZ
Reports for change/transport request SAPKIBIHIZ have been executed
 Start of................ 20060125140530
 End of.................. 20060125140530
Execution of programs after import (XPRA)
End date and time : 20060125140530
Ended with return code: ===> 8 <===
-> BI 2004s with SP04
BWCLNT001 is the logical name (MySelf)
Can you guys help me ?
Thanks,
Guilherme Figueiredo.
Message was edited by: Guilherme Figueiredo

Hi Guilherme,
please open a message in the customer message system (OSS), and attach the log from the posting.
Cheers
 SAP NetWeaver2004s Ramp-Up BI Back Office

Error when importing a Transport request in CHARM???

Similar Messages

Maybe you are looking for